fin press line used for sale

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

System includes receiver tank with agitator, extractor, centrifugal pump, seal water tank, side channel pump, corner pipe strainer eluate line, corner pipe strainer condenser, vacuum unit, heat exchanger, condenser, conveyor unit V 3811 and 3811, sight glasses and fittings, with documentation.

Plant includes receiver tank with agitator, extractor, centrifugal pump, sealing water tank, corner tube sieve eluate line, corner tube sieve condenser, vacuum unit, condenser, oil heat exchanger, conveying unit V 3825 and 3821, sight glasses and fittings, with documentation.

FINN POWER E-BRAKE 65-2550 HS TS 3 servo electric press brake built in 2007 in cooperation with SAFAN (now SafanDarley), achieves the highest quality of workpiece machining while maintaining low operating costs. The high press force of 65 tonnes, 6 numerically controlled axes (X, Y1, Y2, R, Z1, Z2), electric drive and low energy consumption make the machine the best choice among other press brakes available on the market. One of the machine’s greatest advantages is its electric drive, which eliminates the occurrence of the so-called deflection arrow effect and its compensation through even force distribution on the slider. Additionally, in order to increase the working speed and reduce noise, the FINN POWER press brake only consumes electricity when the slider is going down. The entire working area is protected by a programmable light curtain that, when interrupted by hand, allows f ...

Finn Power A5-20FB CNC Punch Press Table size : 1250x2500 (6000 mm with reposition) Number of station : 21 Fanuc control system 23 Ton 3 clamps Conveyor Original Cam program Working hour: 25005 ( April 2023)

Finn Power A5-20FB CNC Punch Press Tools are included Machine is in very good condition

Construction: Entirely constructed of stainless steel Press is used for tenderizing red and white meats without weight loss. All juices are retained inside the meat even after processing. The machine is fast and efficient, with a productivity of 500 steaks per hour. The thickness of the processed meat can be infinitely adjusted in the range from 1 to 30 mm. Technical data: Motor 1.5 kW Height 850 mm Width 440 mM Length 800 mm

Inv. Num. : 6885 Type: C5 Producer: FINN POWER Created: 2007 Parameters: Compressive force: 300 kN Maximum length of the sheet plate: 3000 mm Maximum blade width: 1500 mm Max. sheet thickness: 8 mm Machine height: 2200 mm Machine length: 5570 mm Machine width: 5165 mm Machine weight: 13000 kg

Specifications High speed hydraulic system Brush tables Programmed clamping system PCS Conveyor for removing waste from the processing area Three pneumatic sheet clamps CNC Siemens Sinumerik 840D incl. set of tools, Punching force 23 t Thick Turret Tool Punching diameter, max. 89 mm Number of index stations 4 pcs. (Di, Ci, Bi - 2 pcs.) Rotation speed, max. 58 rad/min Sheet thickness, max. up to 6 mm Sheet weight, max. 200 kg Sheet size, max. (X×Y) 2530×1270 mm (without interception) X-axis speed, max. 80 m/min Y-axis speed, max. 60 m/min Travel speed, max. 100 m/min Hole center deviation (X/Y axis), max. 0.1 mm Revolver rotation speed 30 rad/min Tool change time 1–3 sec Number of sheet clamps 3 pcs. Program memory Sinumerik 840D 2000 KB Machine size length × width × height (with auxiliary table) 5.4×5.6×2.5 m Machine weight 13,500 kg

- CNC Siemens SINUMERIK 3N with SIMODRIVE 611 - 30 Tn. - 19 standard station + 2 auto-index stations. - New TFT control panel. - 75.000 working hours. - Currently in use. - Sold to make space for a more powerful model.

Finn Power C6 CNC Punch Press 30 Ton Working size : 3.074 x 1.565 mm Number of working hour : 4500 (August 2022) Control Unit : Siemens Sinumerik 840D X axis maximum speed : 120 m / min Y axis maximum speed : 60 m / min(Pressure) Air pressure : min 6 bar Maximum thickness : 8 mm Number of station on turret :: 20

Code: 0553 Brand: FIN Model: ME/10 Mixer for glue and varnish - Motor Hp 1,7 - Overall dimensions: mm 500 x 400 x 1000 h - Weight kg 20 E

Screen deck: 1,500 x 6,000 mm, on new base frame, sand-blasted and new painted

With 2 machine burner hose packs (15m) 1 x Percut 101.-2 1 x quick-release head naehere information on request; ready for use

Capacity: 30 t Number of strokes per/min: 0   Day light: 0 mm Front distance between columns: 0 mm CNC Brand: Siemens CNC Model: 840 D MACH-id    5212 MAKE        FinnPower TYPE          C5 Compact Express YOP            2009 SPECIFICATIONS Table load in kG       200 Kg Working area X Axis      2584 mm Working area Y Axis        1270 mm Working area X Axis with override       5168 mm Punching force      30 T Maximum sheet thickness       8 mm Turret position        20 Auto indexing positions        2 x Multi tool Positioning speed X and Y Axis      10800 mm/min. Change speed revolver      166 Rpm  ...

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

The machine is used for making tender steaks and filleting, as well as making julienne / strips. It is applicable for different types of meat - pork, beef and chicken. The processed product does not decrease or shrink its volume, but quickly absorbs the marinade and, accordingly, has increased taste qualities. Products made in this way have a more attractive appearance for sale. The company offers an additional set of 10 mm knives to cut the meat into strips or julienne. The machine is compact, but extremely powerful. Made entirely of stainless steel. The knife shaft consists of 74 knives in 24 parallel rows. Easily disassembled for cleaning. Pressing during processing is carried out by 888 cutting angles. The underside of the knives is also well protected. The motor mechanism works in oil and you do not need to lubricate it additionally. The machine is easy ...

The machine serves to make tender steaks and fillets, as well as to make julienne; The machine is three-phase, with two tools /two-shaft; The machine is used to make tender steaks and fillets. It is applicable to different types of meat - pork, beef and chicken; The processed product does not reduce its volume, but quickly absorbs the marinade and, accordingly, has increased taste qualities; Meats processed in this way have a more attractive appearance for sale; A compact but extremely powerful machine; Made entirely of stainless steel; The motor mechanism runs in oil and you don't need to lubricate it additionally; Easy disassembly and cleaning of the machine; PRICE IN EURO without VAT: 2930

Plate circular saw Finesse vertical Format 510 x 205 cm 2 seed units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Waste Recovery Machine (Opener and Fine Cleaner) OFC machine Year 2018 Model REA 120 Made in EU The function and process: The machine may be used for processing of: -virgin cotton, -cotton wastes, -Jute wastes, -hemp, -linen and other long or short staple fibers. -production capacity is to process 300kg of material per hour The long fibers are cottonized at the entry to the machine, it means the fibers are cut to the short staple length. With the REA – 120 OFC machines can recover up to 85% of LINT may be returned to the process as regenerated fibers. Please note: Rags cannot be opened on this machine. The machine's max. capacity is to process 300kg of material per hour. If we make a basic conservative calculation, we may calculate 250 kg of material per hour and we will obtain approx. 210 kg of good fibers out of that quantity. Calculating one turn of  ...

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg

Russell Finex Vibratory sieve Model: 15555 Serial: 1006 Stainless vibratory sieve with stainless mesh, mesh diameter 900mm, side discharge chute, 3Ph

Hot glue book spine glue Book spine milling station for books max H440xB280xD40mm

Large Format 3000 x 1500mm With Automation Siemens 840

Relay, contactor, semiconductor contactor, contactor -Type: 94 .04 -Quantity: 25 pieces of relays available -Price: per piece -Minimum order: 3 pieces -Weight: 0.2 kg

Hello, I have to sell a punching machine finn power lp6 laser trwagon welman 2500

Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force : 30 Ton Sharing Force : 25 Ton Machine is in excellent condition

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust support structure made of steel - Painted in RAL 2000 with a low weight - Galvanized longitudinal traverse with a length of 2,400 mm - 3x galvanized crossbars with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from t ...

- MAX SHEET LENGTH: (X/Y) - 2530 / 1270 MM - TABLE MAX PUNCHING DIAMETER: 89 MM - NUMBER OF TURRET STATIONS: 20 - PUNCHING FORCE: 200 KN -CONTROL UNIT: SIEMENS SINUMERIK 840D The machine is in excellent shape and powered. Any visits and inspections are welcome.

Combination laser punching FINN POWER LB6 Year 2003 3000x1500

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Operating hours: 48.000 - Axis speed [X axis] max: 150 m/min - Compressed air pressure min: 6 bar - Control type: Siemens Sinumerik 840D - Punch diameter max: 89 mm - Power supply: 80 kVA - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 4 mm - Oil tank capacity: 400 l - Material thickness stainless steel max: 3 mm - Weight: 28.000 kg

Technical characteristics: Model: TP 4025BIF3 / 21 / AM The year of production: 1994 Three-phase machine: 3x 400 V, 50Hz Power: 50 kVA Press power: 300 kN Weight: 11 t

30 ton 1250 x 2500mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Dimension of the workpice:: Ø 1 - 7 mm Voltage 50 Hz 3x: 380 Volt Total installed power: 3 kW Overall dimensions machine: Dimensions:: 900 Length: 700 mm Width: 600 mm

Set of tools included - Number of turret stations (pcs): 20 (D 2x Index, B, 10x, 6 6X (2x Index) - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 52.300 - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg

Machine has 30tns, 30001500, sheet thickness max 8mm, stamping speed 1100 hits/min, max positioning speed x/y 80/160, simultanious 100m/min, Siemens 840D, - scrap conveyor SC1T - Lifting scrap conveyor SC2 - Sheet lubrication, - Tool lubrication - Light guards 5 - safety net LD3000 - GSM Alarm - RS scrap conveyor - Lifting scrap conveyor RSC2 - tool adjust ACS - C1500 sorting belt conveyor - STS 3015 stacking system. - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: 45.000 - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Axis speed [X axis] max: 150 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness ...

Technical data Execution: barrel-burnishing Number of tanks: 2 Polishing bell Behältergrösse: hexagon up: 400 mm Charging hole:: 2 x Length: 150 mm Width: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 2.2 / 1.6 kW Overall dimensions machine: Length: 900 mm Width: 800 mm Height: 1300 mm

Key data: 23 Siemens, 2565 840 D, 1295

Pressure: 23 t Sheet length: 2565 mm Sheet width: 1295 mm Positions ATC: 52   CNC Brand: Siemens CNC Model: 840 D Table load:                   200Kg Working area X Axis:          2.565mm Working area Y Axis:          1.295mm Punching force:               23T Maximum sheet thickness:      4mm Turret position:              52 Auto indexing positions:      4 Positioning speed X and Y Axis:90.000mm/min. Length:                       7.400 mm  Width:                        5.500 mm  Height:                  ...

Pressure: 23 t Sheet length: 2565 mm Sheet width: 1295 mm Positions ATC: 52   CNC Brand: Siemens CNC Model: 840 D MACH-id      5336 MAKE          Finnpower TYPE            E5 Evolution YOP              2000 SPECIFICATIONS Table load in Kg        200 Kg Working area X Axis       2565 mm Working area Y Axis       1295 mm Punching force          23 T Maximum sheet thickness         4 mm Turret position          52 Auto indexing positions      4 Positioning speed X and Y Axis       90.000 mm/min. Control         SIEMENS 840    D incl. Multi tool 24/8 incl. ...

Pressure: 30 t Sheet length: 3000 mm Sheet width: 1500 mm Positions ATC: 0   CNC Brand: Siemens CNC Model: 840 D MACH-id   446 MAKE        Finn Power TYPE          SC 6 Shear Genius YEAR         2003 SPECIFICATIONS Controll         Siemens 840 D Capacity Ø x plate thickness       89 x 8 mm Press force         30 Ton Table size Length x Width          3000 x 1500 mm Working speed         100 M/Min Hydraulic / Mechanical           Hydraulic DIMENSIONS          Length          8000 mm Width            6000 mm Height            ...

Description: Machine in good technical condition, possibility of testing after agreement. Table size: 2500 x 1270mm. Heidenhain 840D system. Accessories: punches and grinder.

Machine weight: 13000 kg Sheet format: 2500 x 1250 mm Max. punching force: 300 kN Max. metal sheet thickness: 8 mm

Machining center vertical SMV-850-H3L Manufacturer: Finetech YEAR: 2014 Control Heidenhain ... TNC 620 Clamping table surface ... 1080x510mm Axis X ... 850mm Axis Y ... 500mm Axis Z ... 550mm Spindle speed... 20-1000 rpm. controlled axes ... 3 cooling ... 20bar ISO 40 Main engine power ... 7.5kW Magazine slots ... 24 Machine weight ... 5000kg L x W x H ... 2600x2620x2190mm The machine is in good condition, possible to test under power.

Punching machine X5 Manufacturer: FINNPOWER YEAR: 2006 Desktop... 2530x1270mm Nominal pressing force... 056 Axis X ... 2584mm Axis Y ... 1317mm thickness of the cut material ... 8mm Magazine slots ... 20 Control Fanuc ... Oi-PC Machine weight ... 10500kg L x W x H ... 7600x6980mm The machine is in good condition, possible to test under power.

This FINN POWER TP2515I/21/AM Punching machine was manufactured in the year 1996. It is equipped with a Siemens SINUMERIK System 3 control unit. The machine has a punching force of 300 kN.