fin machines used for sale

General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill Grinderplate beater Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Fine Impact Mills MaterialStainless steel Information Year of construction1995 Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterFine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU312X490 MakeGörgens Mahltechnik GmbH Dormagen TypeG-130 No.247 Year of construction2001 Main Features Motor110 KW Width1000 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeø 1300 x 680 mm Grinding room sizeø 1580 x 1000 mm Inlet1000 x 150 mm Motor110 kW 400 V Speed1100—1700 rpm With jacketcheck Fine Impact Mills MaterialStainless steel 1.4301 (304) General LocationBarneveld With control cabinet(as is) Floor space2,68 x 1,84 m Total height2,08 m CEcheckFine Impact MillsGörgens Mahltechnik GmbH DormagenMills > Fine Impact MillsBrand > Görgens Mahltechnik GmbH Dormagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

General SKU160P705 MakePallmann TypePP 4 No.0668145 Year of construction1968 LocationBarneveld Main Features Motor22.5 KW Inlet diameter155 mm Width100 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorsimpeller &: co-rotating baffle plate Rotor sizeInner roter ø 396 mm: Outer roter 400 mm Grinding room sizeø 600 Inlet155 x 100 mm Motor15 kW + 7,5 kW, 380 V SpeedMax. 4100 rpm: Grinding disc 1450 rpm With jacketcheck Fine Impact Mills MaterialMild steel General With switchgearcheck Floorspace2,1 x 1,1 m Total height0,8 mFine Impact MillsDiscountPallmannMills > Fine Impact MillsDiscountBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...

General SKU041Z170 MakeForplex Chateaubriant TypeFL-4 No.562 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Information Floorspace1,2x1,3 M Total height1,5 M Weight1900 KGFine Impact MillsDiscountForplexMills > Fine Impact MillsDiscountBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU041Z171 MakeForplex Chateaubriant TypeFL-4 No.561 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Fine Impact Mills MaterialMild steel Information Floorspacemill 1,2x1,3 M Total height1,5 M Weight1900 KGFine Impact MillsDiscountForplexMills > Fine Impact MillsDiscountBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU253M221 LocationBarneveld MakeBauermeister &: Co. Norderstedt TypeUT-63 Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 1200x400mm Grinding room sizeDia. 1200x400mm With sieve cage(Pore size ø 220 µm) With grinding trackcheck Housing dimensions 2000x0,55x1800 mm InletDia. 400 mm Motor185,0 KW, 415 Volt With jacketcheck Fine Impact Mills MaterialMild steel, Stainless steel 1.4462 (Duplex2205) General No.940785 Year of construction1989 Mounted on framecheck Floor space3,9x1,5 m Total height3,0 m Weight8500 kg Extra Specifications-- RECONDITIONED --Fine Impact MillsReconditionedBauermeisterMills > Fine Impact MillsReconditionedBrand > Bauermeister What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

DMG Mori Seiki LaserTec 50 FineCutting Sauer CNC Laser Precision Machine Year / Model: 2019 Control: Celos with Siemens 840D sl Operate CELOS with Siemens 840D sl Operate including 2l .5 ERGOline Control with multi-touch screen CNC Laser Precision Machine with High Speed Machining LASERTEC 50 FineCutting for laser fine cutting, laser drilling, laser welding NC swivel rotary table highly dynamic and precise Travel: 500 mm x 500 mm x 700 mm travel integrated ytterbium cw fiber laser 450W qcw ytterbium fiber laser with 4500W Pulse peak power and 450 W power Processing head (80 mm focal length), 5-axis transformation 100 working hours (new-new) Kaufpreis neu/Buying price in year 2020: 890.000,- Eur, Made in DMG Germany. Included: Fanuc robot automation + Keller autom. Extraction system solid machine base frame made of mineral casting, Camera through optical path for fib ...

FINN-POWER SG-6 turret punch press was built in 1999 in Finland by LILLBACKA CORPORATION. The machine has been regularly serviced throughout its service life. The FINN-POWER Shear Genius SG6 was created as an answer to the daily challenges of modern business. This system is designed for precision punching, stamping and cutting of sheet metal with a maximum length of 3061 mm and a width of 1528 mm. The integration of all the necessary equipment in a single place enables significant reductions in production costs as well as overall working time. All machining processes are performed fully automatically, in a single work cycle. The loading system separates a single sheet from the stack and fixes it in pneumatic clamps. The holes are punched by means of reliable tools taken from the 20-station turret. Parameters such as stroke depth, stroke length and stroke speed can be fully adapted  ...

FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...

Large Format 3000 x 1500mm With Automation Siemens 840

Combination laser punching FINN POWER LB6 Year 2003 3000x1500

30 ton 1250 x 2500mm

Punching machine X5 Manufacturer: FINNPOWER YEAR: 2006 Desktop... 2530x1270mm Nominal pressing force... 056 Axis X ... 2584mm Axis Y ... 1317mm thickness of the cut material ... 8mm Magazine slots ... 20 Control Fanuc ... Oi-PC Machine weight ... 10500kg L x W x H ... 7600x6980mm The machine is in good condition, possible to test under power.

FINN POWER combined laser Mod. LPE5 CO2 laser power 2500 W Turret 20 stations including 1D index-1D index/forming. 2B index-1B index/forming. 8B normal. 1C index-1C index/forming-2C normal.1MT6-A. 1MT24-8 Working field 3000x1500 Year 2004 Rofin DC025

charge load: . Diameter: . mm Diameter: Bechälter 1700 mm serial number: MP-70-3-4-99-A1 : 5221 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: . : . diameter: . mm serial number: MP-70-3-4-98-A1 Job No.:: 4813 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. CNC punching press Finn-Power, type F6 SV, year 2005 Press force: 300kN Max. workpiece width: 4061mm Max. workpiece length: 1528mm Max. workpiece thickness: 8mm Max. workpiece weight: 200kg Fast feed X/Y: 80m/min/60m/min Tower head seats: 20 Tower head speed: 30rpm Travel speed: 100m/min Oil tank capacity: 330l Max. operating pressure: 300bar Dimensions X/Y/Z: approx. 5900mm, 6300mm, 2500mm Weight: approx. 13500kg Control: Siemens Sinumerik 840D Table of the machine has been extended. (Without machine housing)

Vibratory Finishing Bowl ROTO-FINISH ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T

DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system

Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine

contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kW Overall size: ca. 400 x 1100 x 1250 mm deburring machine / free belt frinding machine abrasive belt with widt from 12-50 mm with vertical working position head inclination up to 45° both ways easy bending of the belt allows to follow the shape cutting speed 24m / sec big tabel surface with ball rolling with self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/h comes with a huge bunch of belts! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mobile gravel processing Classifying Screening Plant Washing Plant Wet & Dry Screening Tracked Mobile Manufacturer: Terex – Finlay Type: Supertruk – 694 + Year of Make: 2019 Betriebst. 956 h Drive: Hybrid, Diesel/Electric 3 screen decks 5 fractions incl. oversize Location: NRW Price negotiation for viewing with test run by arrangement. The information in the offer is non-binding, prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Goldmann +49 173 6242 600 (also WhatsApp)

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42100 € : 804.11 € : 2035 mm : 3.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2450 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51100 € : 965.79 € : 3100 mm : 3.5 mm : Hydraulisch : 135 ° : 4300 mm : 1770 mm : 1890 mm : 4520 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 € : 872.87 € : 2035 mm : 6.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3710 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56500 € : 1067.85 € : 3100 mm : 6.5 mm : Hydraulisch : 135 ° : 4500 mm : 1750 mm : 2050 mm : 6800 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50900 € : 962.01 € : 2540 mm : 6.5 mm : Hydraulisch : 135 ° : 3900 mm : 1750 mm : 2050 mm : 6200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,-- OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 61500 € : 1162.35 € : 3100 mm : 3.5 mm : Hydraulisch : 135 ° : 4300 mm : 1770 mm : 1890 mm : 4220 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control Schneider) OPTION: 2 axes NC control with touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56100 € : 1060.29 € : 2540 mm : 3.5 mm : Hydraulisch : 135 ° : 3 kW : 3850 mm : 1700 mm : 1860 mm : 3700 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control) OPTION: 2 axes NC control with touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 61300 € : 1158.57 € : 4010 mm : 3.5 mm : Hydraulisch : 135 ° : 5600 mm : 1800 mm : 2050 mm : 6100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 57500 € : 1086.75 € : 4010 mm : 2 mm : Hydraulisch : 135 ° : 5600 mm : 1750 mm : 2050 mm : 4600 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42900 € : 819.39 € : 2540 mm : 2.5 mm : Hydraulisch : 135 ° : 3850 mm : 1700 mm : 1800 mm : 3400 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 52900 € : 999.81 € : 3100 mm : 4.5 mm : Hydraulisch : 135 ° : 4500 mm : 1750 mm : 1950 mm : 5500 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 62000 € : 1171.8 € : 3100 mm : 2 mm : Hydraulisch : 135 ° : 5 kW : 4370 mm : 1770 mm : 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42600 € : 813.66 € : 2035 mm : 4.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 46000 € : 878.6 € : 2540 mm : 3.5 mm : Hydraulisch : 135 ° : 3.7 kW : 3850 mm : 1700 mm : 1860 mm : 3900 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39000 € : 744.9 € : 2035 mm : 2.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 8310 : prompt, Zwischenverkauf v : Taiwan : 50700 € : 958.23 € : 1 : 2035 mm : 3.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2200 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is used for making tender steaks and filleting, as well as making julienne / strips. It is applicable for different types of meat - pork, beef and chicken. The processed product does not decrease or shrink its volume, but quickly absorbs the marinade and, accordingly, has increased taste qualities. Products made in this way have a more attractive appearance for sale. The company offers an additional set of 10 mm knives to cut the meat into strips or julienne. The machine is compact, but extremely powerful. Made entirely of stainless steel. The knife shaft consists of 74 knives in 24 parallel rows. Easily disassembled for cleaning. Pressing during processing is carried out by 888 cutting angles. The underside of the knives is also well protected. The motor mechanism works in oil and you do not need to lubricate it additionally. The machine is easy ...

The machine serves to make tender steaks and fillets, as well as to make julienne; The machine is three-phase, with two tools /two-shaft; The machine is used to make tender steaks and fillets. It is applicable to different types of meat - pork, beef and chicken; The processed product does not reduce its volume, but quickly absorbs the marinade and, accordingly, has increased taste qualities; Meats processed in this way have a more attractive appearance for sale; A compact but extremely powerful machine; Made entirely of stainless steel; The motor mechanism runs in oil and you don't need to lubricate it additionally; Easy disassembly and cleaning of the machine; PRICE IN EURO without VAT: 2930

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

Make: YORK Type: YCSA-150-TP-380T BLUE FIN Year built: 2010 Power: 155kW Coolant: R410A 4 pieces Copeland Scroll compressors 4 pieces of fans 2 circles With WILO circulation pump 1 condenser is leaking! Price on request Contact details can be found under Contact

Relay, contactor, semiconductor contactor, contactor, coupling relay -Manufacturer: Finder, coupling relay -Type: 38.51.0.240.0060 60 volts -Number: 1 boxes with 10 pieces of relays each -Price: per box -Dimension: 65/90/H80 mm -Weight: 0.3 kg/box

Stick electrodes 5.0 x 450 -Type: Fincord Price: per package -Number: 4 packages available -Weight per package: 5.5 kg

Stick electrodes 4.0 x 350 -Type: Fincord S -Price: per package -Number: 6 packages available -Weight per package: 4.4 kg