fin machines used for sale

Manufacturer: Priess und Horstmann, Type: BAT III, Year: 1995, Control: Priess und Horstmann, Program: yes, Funktion: Frontenbohrmaschine, Work piece width min-max mm: 150-600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-45, One or two Spot machine: 2, Working stations: 2, Feeding speed max m/min: 80, Fitting type: Blum, Set buffer: yes, Working range X: 21300, Working range Y-axis: 2600, Working range Z: 60, Vertical drills-X: 2, Drill vertical Y: 15, Horizontal drills-X: no, Drill gearings: 3, Drilling supprt from bottom: 2, Drill gearings: 3, Drill support from top: 1, Drill gearings: 3, Hinges inserting unit: yes, Magazin for hinges!: yes, Radial arm machine: yes, Year :1995

Manufacturer: Vitap, Type: Point K2, Year: 2018, Barcode scanner: yes, Machining stations: 1050, Work piece width min-max mm: 1010, Work piece length min-max mm: unendlich, Work piece thickness min-max mm: 50, 3 axis control: yes, Working range X: 270 - unendlich, Working range Y-axis: 185 - 1200, Working range Z: 4 - 50, Vertical drilling station from below: 9, Milling spindles horizontal: 1 vertikal, Power kW 1: 5,0, RPM min-max 1: 12.000 - 24.000, Milling spindles vertical: yes, Horizontal drills-X: 2 + 2, Drill horizontal Y: 1 + 1, Sawing unit: 100 mm, Lochraster: 32, Machining stations: 1050, Year :2018

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Manufacturer: Fraxinus - Desco , Year: 2008, Superordinate control: yes, Cycle performance units/min: 5, Work piece width min-max mm: 155-1070, Min.-max. workpiece length in mm: 482-3000, Min.-max. workpiece height in mm: 18-250, Vorschub der Montage m/min: regelbar, Roboterbeschickung für Pappe: yes, Stacking locations: 3, Ausrichtlineal Montagelinie: yes, Length of wrapping belt mm: 25000, Roboteraufstapelanlage: yes, Stacking locations: 3, Carton at pallet: yes, Stacking patterns possible: yes, Discharge station: 1, Einschleussstation: yes, Packing belts: 1, Automatic carton sealer: yes, Folieneischlagstation : yes, Folienbreite max mm: 1500, Foleinschrumpfanlage: yes, Stacking robot: yes, Stacking locations: 2, Pallet buffer: yes, Automatic pallet wrapper: no, Pallet buffer: yes, Feeding speed adjustable: yes, Feed out conveyor for pallets: yes, Sice - euro-pallet: yes, Belt width m ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994

Manufacturer: 2 Lakierroboter Yaskawa, Type: ENCM und ERCS, Year: 2005/2007, Control: Yaskawa, Spraying heads - total: 2, Working width mm: 1500, Conveyour system: Transportwagen gesteuert, gesteuerte Achsen: 6, Ex-geschützt: yes, S-Achse Grad [°]: +/- 170, L-Achse Grad [°]: +/-120-65, U-Achse Grad [°]: +/-205-165, R-Achse Grad [°]: +/-190, B-Achse Grad [°]: +/-145, T-Achse Grad [°]: +/-360, Max.Tragkraft kg: 5, Max Drehmoment Nm: 3/8, Stainless steel design: yes, Spraying stations: 2, Colour circuits: 1, Laquer circles: 1, FREE TEXT: beide Anlagen Roboter sind gekoppelt einem Transportsystem für den Tisch, Year :2005/2007

Year of construction 2016

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 38 mm -Tool: Ø 200 x 30-60 mm -Dimensions: 640/150/H250 mm -Weight: 52 kg

HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...

PONAR TARNÓW RUP-28 universal grinding machine was built in 1979 in Poland by the Fabryka Obrabiarek Specjalizowanych Ponar-Tarnów. The machine is used for precise grinding of both external and internal cylindrical surfaces in order to achieve the appropriate class of surface roughness and the desired shape. The grinding process is performed on a large work table by means of a grinding wheel that reaches a speed of 45 m/s. The machine’s design has been developed to ensure the highest stability and accuracy of the performed operations during many years of intensive use. All this makes the offered RUP 28 cylindrical and internal grinding machine an excellent choice for production plants, tool shops or workshops specialised in the reconditioning of machine parts. The total weight of the machine is 2600 kg. Technical specifications of the PONAR TARNÓW RUP-28 cylindrical grinding mach ...

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

Key data: 800 mm, 650 , 650

We have various spare parts in stock for the following machine. Please inquire! DMU 80E Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410

Key data: 1100 mm, 3 , 150 mm

Wide belt sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, year 1991 TECHNICAL DATA: Working width max. 1,100 mm Working height max. 150 mm Abrasive belt width 1,110 mm Sanding belt length 1,900 mm 1. Grinding unit Profiled steel contact roller D=200 mm Motor power 15 KW 2. Grinding unit Combined contact rolling - grinding shoe unit Profiled rubberized contact roller, D=150 mm Air cushion sanding shoe Motor power 11 kW 3. Grinding unit Grinding shoe unit, electronically controlled link pressure beam Element width 30 mm Synchronization / counter-rotation Infinitely variable sanding belt speed (frequency converter) Digital display of the sanding belt speed Motor power 11 kW - Transport carpet with stepless belt feed 3 - 15 m/min. - Vacuum table / vacuum clamping device 11 kW - Rotating cleaning brush 0.75 kW - Digital display of the grinding height - ...

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

x-travel: 1200 mm y-travel: 600 mm z-travel: 500 mm Control: Dialog 11 turning speed range: 0 - 6.300 U/min spindle taper ISO: 40 total power requirement: 10 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4 x 3 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

Klinger bottle washing machine also for swing-top bottles. Machine can be planned and set up by us. We can also supply additional conveyor technology

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

Machine is in very good condition and swing-top bottles can also be driven 0.5l Bracket 0.5l Euro 0.33l Longleg

Krones bottle washer built in 2001 676-039 6000 bottles/h 0.2l-1.0l bottles Machine will be available in December 2026

1 Qty.1 Second-hand roll grinding machine GRINDER241001-1 Mfc.: Herkules Siegen, min. roll dia.: 250 mm, max. roll dia.: 900 mm, table length: 3,500 mm weight: 20 Tonnes

Key data: 300 mm

2 Qty.1 Second-hand roll grinding machine GRINDER241001-2 Mfc.: Zocca Italy, Type: RCL 2000/6, min. roll dia.: 100 mm, max. roll dia.: 300 mm, table length: 2,000 mm, weight: 10 Tonnes

Key data: 762 mm

4 Qty.1 Second-hand roll grinding machine GRINDER241001-3 Mfc.: Farrell, Type: 409, min. roll dia.: 0 mm, max. roll dia.: 762 mm, table length: 2,514 mm, weight: 15 Tonnes

Manufacturer: Frech Model: DAK 315S Year of Manufacture: 1996 Type of Machine : Cold Chamber Die Casting Machine Control System: Frech DataControl Shot Count: At least 1,147,108 (indicative, hardware change recorded) Condition: Fully production-ready, currently still connected and operational Included: Striko Westofen W455 holding furnace Technical Specifications - Clamping Force: 3,150 kN - Opening Force: 10,000 daN - Closing Stroke: 500 mm - Adjustable Opening Stroke: Yes - Ejector Force / Retraction Force: 159 / 82 kN - Ejector Stroke: 120 mm - Die Height Min-Max: 300 - 700 mm - Platen Size: 900 x 900 mm - Tie Bar Spacing: 550 x 550 mm - Tie Bar Diameter: 110 mm - Injection Position: 0 / -80 / -160 mm - Maximum Injection Force: 350 kN - Injection Stroke: 430 mm - Shot Sleeve Diameter: 50 / 60 / 70 / 80 mm - Shot Volume: 563 / 811 / 1103 / 1441 cm3 - Specific Injection Pressur ...

Key data: 1400 mm

5 Qty.1 Second-hand roll grinding machine GRINDER241001-4 Mfc.: Cincinnati, Type: 50 inch, min. roll dia.: 400 mm, max. roll dia.: 1,400 mm, table length: 4,500 mm, 5100 mm max distance between head, weight: 50 Tonnes, motor head 29.6 KW, motor wheel 67 KW

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2011 Total sled lifts: 3,808,688 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1000x1200 Waste shredder in use until 03/2026 in good used condition Masch. No. 98A-4689 Standard version, screen hole 20mm Low-speed with moving floor Main drive 18.5 kW, hydraulics 0.75 kW 400/690 V, total rated current 36A Fuse 63A Conductor cross-section 4x16 square Weight 1950 kg, 20 cutting edges Rotor speed 140 rpm Rotor diameter 300 mm Extraction diameter 250 mm Exhaust air speed 30 m/s Inlet cross-section L 1000mm W 800mm External magnetic separator Spare blade

Key data: 1750 kN, 393 g/PS, 50 mm

Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

voltage: 380 V connected load: 7,5 kVA dimensions: 2725 x 1930 x 1773 mm weight of the machine ca.: 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - ...

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2011 Total sled lifts: 6,951,567 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2010 Total sled lifts: 4,177,509 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2011 Total sled lifts: 11,018,826 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2015 Total sled lifts: 843,190 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2012 Total sled lifts: 372,713 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

CAM PMM intermittent motion horizontal cartoner with product bucket infeed in extentioned version (plus 500 mm), carton size range min. 15 x 12 x 50 mm (AxBxC), max. 90 x 70 x 200 mm (AxBxC), aeroplane or reverse tuck closure of the carton flaps, capacity up to 140 cycles per minute, compressed air 5-6 bar, machine net weight approx. 1050 kg with product bucket infeed in extentioned version (plus 500 mm), carton size range min. 15 x 12 x 50 mm (AxBxC), max. 90 x 70 x 200 mm (AxBxC), aeroplane or reverse tuck closure of the carton flaps, capacity up to 140 cycles per minute, compressed air 5-6 bar, machine net weight approx. 1050 kg

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife including original Bizerba knife sharpener medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel frame trestle, mobile Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2014 Total sled lifts: 8,174,870 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2009 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer packaging line with undertable Cutting / Depositing / Packaging KUCHLER S.A.M. PX3 Technical data: Slicer type: SAM PX3 (year of manufacture: 2016) Type of foil dispenser: SAM IL - 4 - 220 Airless (Year of manufacture: 2016) Type Packer: SAM KP 21 Airless (Year of Make: 2016) Scale & Labeller Type: Mettler Toledo PAZ UC-GTT-M (Year of Make: 2019) including original stainless steel undertable, rollable Including accessories, see original pictures 400 Volt / 50 Hz / 3.8 A Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original knife sharpener including original knife lifter including original user manual New price in this version approx. EUR 45,000 Function ch ...

Used juice bottling line into cylindrical glass bottles. Line Capacity: 250 ml – line capacity 9,000 – 12,000 pcs/h 330 ml – line capacity 9,000 – 12,000 pcs/h 750 ml – line capacity 5,000 pcs/ Twist-off cap bottles with diameters of 43 and 38 mm The line includes the following devices: Bottle depalletizer type DNB-15. Bottle scrubber type PBSz – 01 – 40. Stork monoblock type VS 32. 32 fillers. Year of manufacture 2015. Automatic cap capping machine with steam injection function model GG100. Rotary labeller from KRONES BONOMATIC Automatic Bottle Packer Type VENUS APB – 15. 10 cycles/min CIJ Videojet Inkjet Printer Model VJ 1620- Linear Bottle Dryer type LOB-25. Pasteurizer. Transporters.

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.