fim used for sale

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...

Strip thickness / strip thickness: 3 - 4 mm Coil weight max.: 10,000 kg Coil inner diameter/coil inner-dia.: 508 mm Coil outer diameter / coil outer-dia.: .700 mm Thorn width / mandrel width: 1,650 mm Low-return / pressure arm Separierarm / separating arm Hydr. Spread / hydr. Spreading Working dircetion: right/left; Right/left On board hydraulic pipes 24 VGS or 110 V, 50 Hz. On board hydraulic piping 24 V DC or 110 V, 50 Hz.

Geared motor, electric motor, electric geared motor -Engine: FIMEA type LR 63B4 -Gearbox: 150 rpm, with oil level indicator -Power: 0.18 kW -Voltage: 220/380 volts -Hollow shaft: Ø 19/80 mm -Protection rating: IP54 -Dimensions: 165/140/H320 mm -Weight: 7.4 kg

Gear motor, electric motor -Speed: 140 rpm -Power: 0.37kw -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: -Number: 1x gear motor available -Dimensions: 360/160/H235 mm -Weight: 12kg

Gear motor electric motor Electric gear motor -Speed: 180 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter shaft: 22 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 17 kg

Working width: 530 mm Length of the planing table: 3.000 mm Number of knives: 4-TERSA St. Motor output: 5,5 kW FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE Partnership Edition Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: 8,990.00 euros  ...

Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm

4-sided planer and roll forming machine with 5 shafts Finished dimensions 240 x 170

Sawblade tiltable: 0-45 ° Length of the rolling table: 3.200, 3.800 mm cutting width: 1.300, 1,500 mm Motor output: 7,5 kW Cutting height: 177 mm Cutting height at 45°: 133 mm Saw blade diameter: 500 mm Speed: 3000/3600/4200 U/min. work height max.: 870 mm Dust suction hood: 1x120, 1x100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 2500x 780 mm Motor output: 7,5 kW Spindle diameter: , mm reus: 1.500 - 10.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fully functional diesel emergency generator. We tested the functionality 2 times a year.

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 14 mm -Construction: B14G -Brake -Protection class: IP55 -Number: 2x available -Price: per piece -Dimensions: 280/160/H210 mm -Weight: 13 kg

Gear motor, electric motor, electric gear motor -Motor: FIMEA type LR 71 b4 -Gearbox: 21 rpm, with oil level indicator -Power: 0.37 kW -Voltage: 220/380 volts -Hollow shaft: Ø 24 x 100 mm -Protection class: IP54 -Brake: 380 v -Dimensions: 470/160 / H195 mm -Weight: 19 kg

Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator

engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1.300 – 1.800 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electric motor, three-phase motor -Manufacturer: Fimec, electric motor -Type: H132SD2UE -Power: 11 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Number: 4x motors available -Price: per piece -Dimensions: 480/255/H340 mm -Weight: 53 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 40 kg

electric motor, three-phase motor -Manufacturer: Fimec, electric motor -Type: H132SC2VE -Power: 9.2 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Number: 3x motors available -Price: per piece -Dimensions: 475/330/H255 mm -Weight: 46.8 kg/pc.

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2017, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, availability: immediate, type: fully automatic

Used Used filling monoblock Fimer: Year: 1985 Condition: As Is Used filling monoblock Fimer Year: 1985 Speed: 2.000 Bph Direction: Clockwise Filler 12 valves Filler gravity Single head | natural straight cork capper Code: QT 691 More details: https://bottlingscout.com

Used Used filling monobock Fimer 12.16.1.1s/va: Year: 2008 Condition: As Is Used filling monoblock FIMER 12.16.1.1S/VA ? 2008 Year: 2008 Speed: 3.000 bph Direction: Clockwise Rinser 12 clamps Single treatment Fixed nozzle Filler 16 valves Single head corker for natural straight cork Predisposition for a second capping turret Safety protections Code: QT 510 More details: https://bottlingscout.com

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397088 The data for this ad was created with ModulMWS - the software solution of  ...

General SKU345S531 MakeFima Verfahrenstechnik (DE) LocationBarneveld TypeTZT-1300 Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor55 KW Inlet diameter40 mm Specified Features - Basket centrifuge Basket centrifuge:Horizontal: Capacity800 Ltr. Basket sizesdia. 1300x600mm Wall thickness15 mm Max. loading weight380 kg Mechanical operatedcheck Motor55,0 KW, 400 Volt (Ex) With variable speed drivecheck Max. basket speed900 rpm MaterialStainless steel 1.4404 (316L) General No.88789/2 Year of construction1999 Mounted on framecheck Floorspace3,8 x 1,9 m Total height2,8 m Weight± 9000 kg Extra SpecificationsFilter area: 2,4 m²Max. temp.: 150 °CProduct outlet: DN40Product inlet: DN40with:braking resistor: Frizlen, type: FA 3247002, 35 kWBasket centrifugesPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemi ...

Used Used filling monoblock Fimer 9.9.1: Year: 2001 Condition: As Is Used Filling Monoblock Fimer Year: 2001 Speed: 1.000 bph Direction: Clockwise Model: SRT 9.9.1 S DEAR-B-I Rinser 9 clamps Single treatment Fixed nozzle Station for nitrogen injection before filling Filler 9 Filling Valves Corker single head Cork: Natural Straight cork Safety protections Code: QT 562 More details: https://bottlingscout.com

Used Used filling monoblock Fimer 12.1: Year: 2008 Condition: As Is Used filling monoblock Fimer 12.1 Year: 2008 Speed: 2.000 bph Direction: Clockwise Filler 12 valves High vacuum (work thick liquids) Not wine Single head capper ? screw cap 31.5 x 24 Safety protections Code: QT 326 More details: https://bottlingscout.com

Used Used filling monoblock Fimer 9.1: Year: 1995 Condition: As Is Used filling monoblock FIMER | 9V Year: 1995 Speed: 1.200 bph Direction: Clockwise 9 Filling valves Single capping head Natural straight cork Vacuum system before capping No gas injection Safety protections Code: QT 513 More details: https://bottlingscout.com

Used Used Fimer monoblock: Year: 2016 Condition: As Is Model: 9/1R-1C Riconditioned 2016 Covolan Speed: 1000 bph Direction: american Type: glass bottle 9 mechanical valve gravity filling Covolan single head capper for straight cork and for crown cap Caps measure: ? 29mm Distribution system: pick on the fly CO2 injection system before capping Safety protection Code: QT 763 More details: https://bottlingscout.com

Table dimensions: 1.200 x 780 mm Motor output: 7,5 kW Spindle diameter: 30 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm

Coil turner, usable as a stand-alone machine for dressing coils of all kinds, or at the end of a slitting line for setting up sliced coils as a transfer for a coil packaging system.

General SKU356S850 LocationBarneveld MakeFima Verfahrenstechnik (DE) TypeTitus Zentrifugen Trockner TZT-1300 No.81066 / Z00069 Pressure Working pressure3.5 Bar Main Features MaterialStainless steel Motor55 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifuge(horizontal) Perforated basketcheck Capacity800 Ltr Basket sizes1300x600mm Wall thickness4 mm Max. loading weight300 KG With bottom dischargeDN50 Mechanical operated55 kW, 400 Volt (EEx deIIC T4), 3 KW, 400 Volt (EEx deIIC T4) Liquid outletDN150 Hydraulic drivecheck Motor1,0 KW With variable speed drivecheck Max. basket speed200-830 rpm MaterialStainless steel 1.4539 (904L) General Year of construction1996 Floorspace4,5x3,6 M Total height3,3 M Weight9000 KG Extra SpecificationsFilter area 2.4m2Basket centrifugesPowdered foodsGeneric medicinesFine chemicalsStarchOther chemical ...

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2023, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, capacity: 600 kg/h depending on material and mesh, availability: immediate, type: fully automatic

General SKU345S530 MakeFima Verfahrenstechnik (DE) LocationBarneveld TypeTZT-1300 Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor55 KW Inlet diameter40 mm Specified Features - Basket centrifuge Basket centrifuge:Horizontal: Capacity800 Ltr. Basket sizesdia. 1300x600 mm Wall thickness15 mm Max. loading weight200 kg Mechanical operatedcheck Motor± 55 kW With variable speed drivecheck Max. basket speed900 rpm MaterialStainless steel 1.4571 (316Ti) General No.Z00033 Year of construction1994 Mounted on framecheck Floorspace3,4x2,5 m Total height2,55 m Weight± 9000 kg Extra SpecificationsFilter area: 2,4 m²Max. temp.: 100 °CProduct outlet: DN40Product inlet: DN40with:braking resistor: Frizlen, type: FA 3247002, 37,7 kWBasket centrifugesPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic  ...

Emergency generator 85 kVA MAN system - with control cabinet - 150 hours - - - - - Engine: - VEB (MAN System) (Germany) - 6 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator - 85 kVA - 230 / 400 volts - 50 Hertz - - - - - Control / Control cabinet - Manual start at the touch of a button - Automatic start function in case of power failure - Generator monitoring: volts, amps and hertz display - Engine monitoring: false start, oil pressure, oil temperature, etc. - Hour meter: 150 hours - - - - - Condition: - The generator is a pure emergency system - It was used for emergency power backup in a nursery and has only run for 150 hours of operation - Regular maintenance and test runs were carried out - The engine runs well and the generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Generator set 85 kVA - In ...

Sell a notching machine from FIM in good condition!

Electric motor, three-phase motor, brake motor -Manufacturer: Fimec, electric motor with brake -Type: H90L6T -Power: 11 kW -Speed: 900 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP54 -Brake: -Number: 2x motors available -Price: per piece -Dimensions: 355/200/H235 mm -Weight: 17.8 kg

Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Window processing line, CNC window manufacturing plant, window angle system, clamping device -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

electric motor, three-phase motor -Handover: in its current condition as inspected -Mounting flange: Damage, see photos -Manufacturer: Fimec, electric motor -Type: H132SC2VE -Power: 9.2 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Dimensions: 480/320/H255 mm -Weight: 47.2 kg

FIMIC RAS 325 BACKFLUSH, fully automatic screenchanger, for back-flush only, so for contamination under 5%, no costs for doctor blades, no cost for laser filter., works with standard mesh, capacity related to screening mesh - with a 250 µ mesh, up to 700 kg/h, connected for test, offered totally reconditioned, with new control panel (or with drawings only), availability: 4 -5 weeks time, capacity: Max 500-600 kg/h, conditions: totally reconditioned, type: fully automatic - backflush

Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details.

General SKU071F406 MakeFima Process GmbH LocationBarneveld TypeTZT-400x300 Main Features MaterialHastelloy Motor7.5 KW Inlet diameter400 mm Specified Features - Basket centrifuge Basket centrifugedryer Perforated basketcheck Capacity37 Ltr Basket sizesdia. 400x300mm Max. loading weight20 kg Motor7,5 KW, 400 Volt (Ex) Max. basket speed1800 Rpm With jacketcheck MaterialStainless steel 2.4602 (Hastelloy C-22) With jacketcheck General No.20300211 Year of construction2003 Mounted on framecheck Floorspace2,5x1,1 m Total height1,3 m Weight2000 kg ATEX designedcheckBasket centrifugesPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDiscountE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicFima ProcessCentrif ...

VISCO JET MOTOR WITH PUMP  SSG FIMETT, ADLF 5X18 MULTISTAGE PUMP C/W 4KW MOTOR,4POLES AND 50HZ PLEASE CONTACT FATIMAH (+60136287197) MALAYSIA NUMBER LOCATED AT F25

Manufacturer: FIMER, type T/6-V.A. Year of constr. 2000 6 capping heads. for 28 MCA amount of capping heads: 6 working direction: right-left (CCW)

Table dimensions 3,500 mm x 530 mm Infeed table length 2,300 mm Wave speed 5,000 rpm

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, installed power - used power in work: about 60-65% : 30

Table dimensions 3,000 mm x 530 mm Infeed table length 1,800 mm

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table