136,418 used machines on RESALE, but how to find them? Machine Search
MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m. Immediately available as pick-up in the workshop Top condition ! Still in operation 2026
An Inotec spindle press for rolling and forming sheet metal bodies of various sizes is available. Safety distance: 350mm, max. product diameter: 350mm, control system: PLC, weight: approx. 1800kg. Including pressure plate magazine and various tool sets. Documentation available. An on-site inspection is possible.
Hand spindle press 25to -Passage between the columns 400mm - Spindle diameter 80mm -Height clearance 420mm -Various clamping claws Dimensions: LxWxH 1.2x0.8x2 meters / Weight 700Kg
Large garbage compactor / cardboard compactor, Höma, – used - : Price from location: only 18.950.-€ (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of Make: 2014 Machine number: 140409 Net weight: 1.200kg Pressing force: not specified, but we suspect 40 tons. The press has a second ejection channel Price incl. small crane with cat 30kW Condition: good Available: from Q4/2026 Location: Hamburg For an extra charge, a conveyor technology - empty cardboard conveyor belt over 100m! Photos at the end of the ad!
Inv. Num. : 9233 Type: LUD 500/2500-F1 Producer: ZDAS Created: 1975 Parameters: Compressive force: 500 t Maximum stroke rate upper table: 20 1/min Ram stroke: 315 mm Main motor power: 55 kW
T-slot table, High: 2.500 mm, Long: 1.700 mm, Pump: 18 L / mm, Force: 5 TN, Width: 1.000 mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Step between uprights: 200 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics
Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3 ...
Two T-slot tables, High: 2.500mm, Long: 1.700mm, Pump: 18L / mm, Force: 5 TN, Width: 1.000mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics
This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Speed: 60 - 320 SPM Adjustable stroke 8–80 ...
Equipment: Insulation, Overpressure,Manufacturer: METALINOX,Condition: used,Volume: 7,500,Max. overpressure: 5.0,Design: upright,Standing form: feet height adjustable,Number of feet: 4,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 1,900,Diameter outside: 2,034,Cylindrical height: 2,000,Total height: 4,400,Wall thickness floors: 5,Wall thickness cylinder: 5,Year of construction: 2005,Technical documents: Drawing, CE marking and Declaration of Conformity,Manhole / Dome: in the topsoil,Type plate: Yes,Equipment: Spray head, crane eyelets,Outlet: DN80 DIN
Equipment: Overpressure,Manufacturer: DINO Steam Generator,Condition: Used,Volume: 110,Max. Overpressure: 3.0,Design: Hanging,Shape: Frame,Diameter inside: 400,Cylindrical height: 820,Total height: 1,150,Year of construction: 2020,Manhole / dome: in the top floor (DN 400),Type plate: Yes,Remarks: Principle drawing available Frame made of V2A,Last purpose: Autoclave for sterile masks,Material in contact with the product: V4A 1.4401/04 (AISI316),Bottom bearing: No,Current interferer: No,Bottom bearing: No, Power Interferer: No
Equipment: Overpressure,Manufacturer: eurocont,Condition: used,Volume: 1.000,Max. overpressure: 2.0,Max. permissible Operating temperature : 130,Design: Container,Stand shape: Frame,Number of feet: 4,Diameter inside: 1,000,Cylindrical height: 965,Total height: 1,850,Wall thickness underbody: 2.5,Wall thickness cylinder: 2,Wall thickness upper floor: 2,Technical documents: Drawing,Type plate: Yes,Equipment: Disc,Outlet: DN50 DIN 11851 ,Remarks: Hand hole DN 100 in the top floor (occasionally the union nut is missing) Partly small dents possible,Last use: Food,Material
Equipment: Insulation, Overpressure,Manufacturer: Thyssen Umformtechnik (UCON),Condition: used,Volume: 1,000,Max. overpressure: 2.00,Design: Container,Stand shape: Frame,Insulation: available,Insulation material: PU foam,Material insulating jacket: galvanized steel,Diameter inside: 1,100,Total width: 1,200,Total length: 1,200,Technical documents: TÜV papers,Manhole / dome: in the topsoil (DN 400),Type plate: No,Outlet: 76,Note: slight adhesions, pressure points on the Insulating sheath, traces of use, remarks: partly slight differences in the design Total height 1800 - 1960 mm
Equipment: overpressure, vacuum,Manufacturer: Wilhelm Schmidt,Condition: used,Volume: 3,Vacuum: 1.0,Max. overpressure: 5.0,Design: upright,Standing shape: Stand frame,Diameter inside: 140,Total height: 260,Technical documents: Drawing,Type plate: No,Outlet: not available,Remarks: Opening in the top floor Diameter of pipe inside approx. 28 mm Pressure-resistant closures for this opening are not available (could be purchased by you from the manufacturer) Since the containers were supplied by the previous operator were operated without pressure, pressureless caps were used there (see photos)
Equipment: Insulation, Overpressure,Condition: used,Volume: 3.600,Max. overpressure: 2.6,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Insulation: available,Insulating sheath: hermetically welded,Insulation material: PU foam,Material insulating sheath: stainless steel,Insulation thickness: 50,Diameter inside: 1,400,Diameter outside: 1,500,Cylindrical height: 2,000,Total height: 3,400,Wall thickness floors: 4,Wall thickness cylinder: 3,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Spray head,
Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 2.470,Max. overpressure: 3.0,Design: standing,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 1.300,Cylindrical height: 1.500,Total height: 2.450,Wall thickness shelves: 3.8,Wall thickness cylinder: 4.5,Year of construction: 2015,Technical documents: Drawing, acceptance certificate, CE marking and declaration of conformity,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: disc, Spray head, outlet: DN32 DIN 11851, last purpose: brewery, material in contact with the product: V2A 1.4301
Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 3,000,Max. overpressure: 2.0,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 1,390,Cylindrical height: 1,500,Total height: 2,500,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: disc,Outlet: DN50 DIN 11851 ,Note: slight adhesions,Remarks: Manhole Dimensions: approx. 300 x 395 mm (the manhole cover is missing),last use: Brewery,Surface exterior: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer:
Equipment: Overpressure,Manufacturer: Coelho,Condition: used,Volume: 3,660,Max. overpressure: 3,00,Max. permissible Operating temperature : 85,Bottom floor: Cone bottom,Design: upright,Stand shape: Feet,Number of feet: 3,Diameter inside: 1,600,Cylindrical height: 1,500,Total height: 3,850,Wall thickness underbody: 5.1,Wall thickness cylinder: 6.1,Wall thickness upper floor: 5.6,Manhole / dome: Hand hole,Type plate: Yes,Equipment: Crane eyelets,Outlet : 60,Note: slight adhesions,Remarks: Cone height approx. 800 mm 1 hand hole diameter 350 mm in the top floor 1 small bump in one of the feet (see photos), last
Equipment: Overpressure,Manufacturer: Martin Rosa KG,Condition: used,Volume: 6,200,Max. overpressure: 8.0,Design: lying,Base: feet,Number of feet: 4,Diameter inside: 1,600,Cylindrical length: 2470,Overall height: 1,900,Total length: 3,400,Wall thickness shelves: 4,Wall thickness cylinders: 4,Type plate: Yes,Outlet: DN65 DIN 11851 ,Note: slight adhesions,Remarks: 1 manhole approx. 320 x 420 mm in the front floor (one container is missing the manhole cover) with 1 tank the nameplate is missing Front floor outside marbled foot ends partially shortened, total height may vary slightly, last
Equipment: Insulation, Overpressure,Manufacturer: ABAB General Tank and Apparatus Construction,Condition: Used,Volume: 10,000,Max. Overpressure: 5.00,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Insulation: available,Insulating sheath: hermetically welded,Material insulating sheath: Stainless steel,Diameter inside: 1,800,Diameter outside: 2,000,Cylindrical height: 4,000,Total height: 5,200,Wall thickness floors: 7,Wall thickness cylinder: 5,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Level indicator
Equipment: Overpressure, Vacuum,Manufacturer: Industrietechnik Ambs,Condition: used,Volume: 50,950,Vacuum: 1.0,Max. overpressure: 3.0,Max. permissible Operating temperature : 200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,600,Cylindrical height: 4,100,Total height: 6,000,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Outlet: flange,Outlet : 100,Remarks: Steel feet cut off below the mounting flange (see pictures),Last purpose: Chemical,Material in contact with the product: V4A 1.4571 (AISI316),Material feet: Steel,Bottom bearing:
Equipment: Heatable/coolable, Overpressure, Vacuum,Condition: used,Volume: 33.725,Vacuum: 1.0,Max. overpressure: 6.0,Max. permissible Operating temperature : 140,Specific gravity of the medium: 1.9,Design: upright,Standing shape: feet,Number of feet: 4,Heating/cooling (filter bar): available,Volume double jacket: 420,0,Max. permissible Operating overpressure double jacket / pipe chamber / bar: 4.0, max. permissible Operating temperature : 140,Temperature control cylinder: half tube coil,Temperature control underbody: half tube coil,Diameter inside: 2,400,Total height: 8,850,Technical documents: drawing, various documents,Manhole / dome: in the
Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880
This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine.
Laminating press manufactured in 2007. This OTT SOLID 16-32 features plate dimensions of 3200 x 1600 mm and a total pressure of 160 t, with a daylight opening of 400 mm. If you are looking to get high-quality laminating capabilities, consider the OTT SOLID 16-32 machine we have for sale. Contact us for further details.
9 assen: Y1 / Y2 / X1 / X2 / Z1 / Z2 / R1 / R2 / V Amada / Europees type gereedschap laserbeveiliging Capacity: 175 ton x 3700 mm Backgauge: CNC - 1000 mm Control: Delem DA-66T Passage between uprights: 3100 mm Max stroke: 265 mm Max distance between table -- ram: 530 mm Depth of throat: 410 mm Table width: 104 mm Locking speed: 140 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 18,5 kW Length: 4950 mm Depth: 1700 mm Height: 2900 mm Weight: 11,5 ton Capacity: 175 ton Bending length: 3700 mm
Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details.
Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg
Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg
Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T
The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...
Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details.
chamfer lenght: 3020 mm plate thickness: mm distance between columns: 2555 mm pressure: 220 t stroke length max.: 350 mm travel -x axis: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine.
wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370
Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine.
diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200
This 4-axis TRUMPF TrumaBend V50 was manufactured in 2000. It features a work length of 1270 mm and a press force of 50 tons. The machine includes a back gauge with 2 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V50 press brake we have for sale. Contact us for further details.
diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370
Used screw press for pressing grapes made by Vaslin model CEP 150S . Capacity approx. 750 L. Feed from the destemmer-crusher pump. Plastic feed hopper. Plastic tank. Suitable for all soft fruits as well as, for example, ground apples, etc.
diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350
wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
- Year of construction : 2000 - Membrane: 2024 - With 2 large filling doors - With central filling - With large juice tray - With foot extensions H 200 mm - Last ml in operation: 2025 harvest - Machine in very good condition Dimensions: - Length: approx. 4 700 mm - Width : approx. 1 900 mm - Height: approx. 2,000 mm
with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
Mechanical stamping press manufactured in 2012. This Colombo Agostino T231A315 features a nominal press capacity of 315 tons and a slide stroke of 250 mm. It includes a motorized slide adjustment of 315 mm and a bed dimension of 1120 mm x 960 mm. If you are looking to get high-quality stamping capabilities, consider the Colombo Agostino T231A315 machine we have for sale. Contact us for further details.
diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950
This 6s TRUMPF TrumaBend V50 was manufactured in 2000. It features a work length of 1270 mm and a press force of 50 tons. The machine includes a back gauge with 4 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V50 press brake we have for sale. Contact us for further details.
diameter range 2,2-4,2 mm nail length 13-105 mm output - pieces/min 430
wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430
maximum number of results exceeded
please refine your search
