filtr press used for sale

price only for filter frame Optional filter plates - see ID-5175 Plates maximum: 150 Plate formats: 600x600 dimension ca. 470x80x110 cm Distance between first plate and spindle approx ca. 300cm

price only for filter frame Plates maximum: 150 Plate formats: 600x600 dimension ca. 310x90x220 cm Distance between first plate and spindle approx.140cm

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

NANO FILTRATION & REVERSE OSMOSIS PLANT USED FOR WHEY CONCENTRATION FEED CAPACITY: 20.000 LITER PER HOUR OUTLET: 22 % SOLID RATIO ALFA LAVAL AND FRISTAM PUMPS VERY GOOD MECHANICAL CONDITION YOM: 2002

NANO FILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

Extraction plant

- Filter area : 6 m2 - Machine in good condition

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

- Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible.

- Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure: 6 bar - Capacity : 30 – 120 hl/h - With semi-automatic cleaning - Dosing pump was replaced in 2017 - Machine in good condition Dimensions: - Length : 1800 mm - Width: 850 mm - Height: 2000 mm

for sale is an extraction / filter system from Aerotecnica, System is still under construction., Subject to prior sale, changes and errors!

General SKU360U945 MakeMillipor Ultra Filtration LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4404 (316L) General No.F0PA48268 Year of construction2011 Mounted on wheelsSkid Floor space1,98x1,25 m Total height2,85 m Extra SpecificationsTank volume 261 ltr, fluid steam, working pressure -1/3 bar, test pressure 5,5 bar, work temp 135°C, with Wright flow &:nbsp:pump, type SLBS/0081, 0,75 kW, 15 bar, Waukesha pump unit, type SLEL/1099, 5,5 kW, 10 bar, Millipor filter elements, type CUF01, Endress+Hauser flow valvesOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other  ...

General SKU360U950 LocationBarneveld CEcheck MakeMillipor Ultra Filtration TypeRVT0 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Vacuumcheck Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4401 (316) General No.15843 Year of construction1998 Mounted on wheelsSkid Floor space2,075x1,250 m Total height2,860 m Extra SpecificationsTank volume 250 ltr, fluid steam, working pressure 2 bar, design pressure -1/3 bar, test pressure 4,2 bar, design temp 135°C, with Waukesha pump, type 006U2, 0,55 kW, Waukesha pump unit, type 060U2, 5,5 kW, Millipor filter elements, type CUF01, Endress+Hauser flow valves, Gemo valves, 2-doors control cabinet with B&:amp:R touchscreen controlOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubb ...

General SKU237S132 MakeMillipore Process system (Fr) LocationBarneveld CEcheck TypePSKUF 20/4/3 Pressure Working pressure0.45 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Specified Features - Miscellaneous filter Max. temperature-10-110 degr. C With stirrer:magnetic stirrer: Miscellaneous filters Filtercheck Filter surface20 m² MaterialStainless steel 1.4404 (316L) General No.MSP007665 Year of construction2004 Mounted on framecheck With switchgear(as is) Floorspace2,0x1,9 M Total height2,7 M Weight1550 Kg Extra SpecificationsThe process boiler has a gross volume of 200 liters. (nett. 160 ltr.)The filter plates are not mounted. the type of plate that has been in this device is the Prostak PLAC 1kD consisting of 12 elements with a total filter surface of 20.4 m2Oils & fatConsumer wasteP ...

General SKU291W494 MakeSartorius Stedim TypeSartoflow Advanced No.4143000387 Year of construction2022 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck Filter surface0.1-0.5 m2 MaterialStainless steel 1.4404 (316L) With jacketcheck General Floor space0,75 x 0,80 m Total height0,90 m Weight120 kg CEcheck Extra SpecificationsPressure vessel jacket, volume 10 l, pressure -1/+4 bar, test pressure 7,15 bar, allowable temperature-10°C/+150°C.Molecular Weight Cut off: 10 kDEndress+Hauser dosimag,touchscreen control Technical specs Extra informationVolume 10 l., pressure -1/+4 bar, test pressure 7.15 bar, allowable temperature-10°C/+150°COils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlas ...

General SKU170P778 MakeFiltron (Pall) TypeOmega 3 Micron Maxisette - Open channel LocationBarneveld Specified Features - Miscellaneous filter FilterTangential flow filtration membrane cassette Filter surface27 Sq Ft., Mounted on wheels With jacketcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMiscellaneous filtersMinerals & inorganicFiltron pallIndustries > Food & Feed > Oils & fatIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsInd ...

General SKU289P524 LocationBarneveld MakePall Filtron Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel General TypeCentramate Mounted on wheelscheck Floor space2.5x0.9 M Total height2.3 M Weight750 KG Extra SpecificationsA Pall Filtron filter and a tube heat exchanger are mounted on this mobile skidOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMiscellaneous filtersMinerals & inorganicFiltron pallIndustries  ...

General SKU203S014 MakeFilmac srl S/L Filtration (It) LocationBarneveld CEcheck TypeFiltropressa BC-800.40(35).25 Pressure Working pressure16 Bar Main Features MaterialPolypropylene Pressure16 Bar Surface35 m2 Specified Features - Filterpress Filter presscheck Filter surface35 m² Recessed chamber platescheck Number of platens35 Internal platen sizes740x740 mm External platen sizes800x800 mm Platen thickness60 mm With membranes on platenscheck Cake capacity191,6 Ltr. Central inletdia. 80 mm Connectionsdia. 80 mm With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor14,4 kW 230/400 Volt MaterialPolypropylene General No.91137 Year of construction2000 With switchgearas is Floorspace5x1,6 m Total height2 m Weight4500 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFilterpressesFine chemicalsStarchAgrochemicalsBiotechnologyPl ...

Very good condition. Filterelements should be replaced.

filtration surface (sqm): 12 discharge of vessel: automatic discharge operating pressure (bar): 9 electrical power supply kW: 5 weight [kg.]: 1500 volume of vessel (ltr): 880

General SKU279M275 LocationBarneveld MakeAcometi TypeFiltre Pressure Working pressure3 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.6 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,6 m2 Capacity515 Ltr Vessel sizesdia. 890x650mm Top connectionsdia. 45mm + 4x aansluitingen Liquid outletdia. 55mm With jacketcheck Max. temperature150 Degr. C. MaterialStainless steel 1.4306 (304L) With jacketcheck General Mach.No.8911 Year of construction1987 Mounted on legscheck Floorspace1,4x1,4 M Total height1,5 M Weight660 KGOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalAgrochemicalsBiotechnologyNutsche filtersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceut ...

General SKU053T220 MakeFiltroba Technik AG Mach.No.2020 Year of construction1992 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor3 KW Surface0.25 m2 Specified Features - Nutsche filter Nutsche filter/dryer:Helical filter dryer: Filter surface0,25 m² Capacity26 l. Vessel sizesDia: 350x300 mm Plate sizesDia: 350 mm With jacket(2 Ltr) Max. temperature160°C With stirrercheck Motor3,0 kW, 220/380 Volt (Ex) With variable speed driveVar-Spe Type: 2115/100/04 Cake capacity7,5 l. MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Mounted on frame(stainless steel) LocationBarneveld Mounted on wheelscheck With switch(as is) Floorspace1,5x0,8 m Total height1,7 m Weight450 kg Extra Specificationsupper mechanical seal has been overhauledOils & fatPowdered foodsGeneric medicine ...

PVPP filter - Filtrox CHF with: - Filter vessel - PVPP batch dosing vessel - CIP station for regeneration - Swing bend panel for system integration - all pumps, fittings and field instruments - Control cabinet with control panel, Additional title: Centrifugal horizontal filter, Filter capacity: 20000 l/h, Volume: 1620 l, Operating pressure: 6 bar, Operating temperature: 100 °C, Systemic volume: 1620 Liter, Width: 1,2 m, Height: 2,85 m, Weight: 2500 kg, Operation / Control: Manual system, mainly with pneumatic valves, operation take splace on the control cabinet panel, Material: stainless steel, Features: Filter vessel with horizontal filter elements, stack dosing container with agitator, CIP system for regeneration, control cabinet with control panel, pumps, fittings and sensors

The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank., Additional title: membrane filtration plant for yeast-beer recovery 1987-1991, Capacity: 7 hl/h, Tol. operating pressure: 10 bar, Tol. operating temperature: 85 °C, Max. filter area: 26 m^2, Current: 4,85/2,8 A, Voltage: 220/380 V, Frequency: 50 Hz, Operation / Control: Simatic S5, Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Nucha dryer filter made of second-hand stainless steel. It includes a hydraulic power plant, which controls: Up/down agitation. Trigger agitation. Open/close solids discharge. Raise/lower plate. Mounted on structure. Equipment dimensions Inner diameter 880 mm Internal height 805 mm Transportation Information Length 2,350 mm Width 2,100 mm Height 3,200 mm Weight 1,600 Kg No documentation Filtration area 0.6 m² In your state

Complete beer clarification plant, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Diatomaceous earth filter based on the Twin Flow system. The diatomaceous earth filter has recently undergone a complete mechanical and electrical overhaul and has been fitted with additional measurement technology. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - 2 trap filters - Buffer tank for unfiltered wine (Gross, 1979) with a volume of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a volume of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979), Additional title: Kieselguhr filter Twin Flow System, Filtration capacity: 200 hl/h, Filter area: 26 m², Max. operating pressure: 9 bar, Filter Cartridges: 135 ...

General SKU226Y118 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General MakeGEA Wiegand Serial354320.90-1 Year of construction2015 Floor space3,19 x 1,27 m Total height1,92 m Weight800 Extra SpecificationsMain components—&:nbsp:One sanitary process/buffer tank (524 L, unpressurized, closed design, with cooling jacket, spray ball for CIP, DN200 hand-hole), with magnetic stirrer, 0,55kW, 400V, 369rpm— One closed-loop RO membrane unit, product-contact parts in stainless 1.4404— Feed pump, 200 µm edge-gap strainer, tube-bundle heat exchanger (loop cooler), one 3838 membrane housing, control and sampling valves, safety/relief valveFlow rates—&:nbsp:Feed pump (41P01): max 1,200 L/h (~1.2 m³/h at 55 bar)— Loop pump (01P01): max 15,000 L/hPressure  ...

General SKU226Y423 LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4435 (316L) General MakeFiltrox AG Serial9125248 TypeCMF Pilotanlage Year of construction2008 Floor space1,10x2,50 m Total height2,25 m Weight800 Extra Specificationspressure 8 bar, allowable temperature 100°C, with4x membrane filter, 2x 800 Nm and 2x 5 Nm,&:nbsp: Stainless steel vessel, 110 l., hot water vessel,&:nbsp: Alfa Laval heat exchanger, type M3-base, volume 1,5 l., 9 bar, temp max 105°C ETS heat exchanger, typ: GK10-40/1/1-K-14-V, 10bar, 100°C and 180°C centrifugal pump: hilge, typ: euro-Hygia 1, 1m³/h, 1,5kW centrifugal pump: hilge, typ: euro-Hygia 2, 8m³/h, 7,5kWEndress+ Hauser flow valves, Siemens touchscreen control, type Simatic panel, Yokogawa control.Oils & fatConsumer wastePaints & coat ...

AR filtrazioni AR 2 / PX AE ist ein Ölnebelabscheider, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Ansaugstutzen Ø 150 mm; Anschluss 50 Hz 3x 400 V; Gewicht 300 kg; Abmessungen L 960 × B 660 × H 1300 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Filtre à bande Nr. 49 ist ein Bandfilter, konzipiert für Präzision, hohe Genauigkeit und zuverlässigen Betrieb. Es handelt sich um eine Anlage zur Bandfiltration; detaillierte Angaben zu Arbeitskapazitäten und technischen Daten liegen nicht vor. Entwickelt, um Prozesse mit engen Toleranzen zu unterstützen, geeignet für verschiedene industrielle Einsatzbereiche. Technische Daten ohne Gewähr

General SKU315Y649 MakeIMAX T&:E TypePharma Press I No.- LocationBarneveld Main Features Tablet Diameter14 mm Specified Features - Single stroke tablet press Single stroke tablet presscheck Tablet diameterø 2 — 14 mm With hoppercheck Capacity5.500 pill/h With motorcheck Material1.4713 (Sicromal 8 / X10CrAlSi7) General Floorspace0,47 x 0,4 m Total height0,86 m Weight100 kgGeneric medicinesSingle stroke tablet pressesConfectionerySolid pharmaceuticsIMAX T&EIndustries > Pharmaceutical > Generic medicinesPresses > Single stroke tablet pressesIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsBrand > IMAX T&E What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces fre ...

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Weingarten Excenter Press

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...