filtr press used for sale

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

Reference Num.: 4274 Brand: BOBST Type: SP 142 CER Construction year: 1995 Available: directly Status: In production Location: Deutschland

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron

Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

CONTROLS   PLC BECKHOFF SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm LEVELLER UNIT   sheet width max.: 400 mm   sheet width (min): 100 mm   sheet thickness max.: 12 mm   sheet thickness min.: 1.6 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min   Vertical adjustme ...

Manufacturer: EBERHARDT Schinkenpresse (round) Dimensions of the press: L 820 x W 1000 x H 1960 mm Number of molds: 32 Dimensions of the moulds: L 760 x W 130 x H 65 mm Surface of the moulds electrolytically polished Design: Closed, round sheet metal construction for filling with smoking foil or special paper for drying, smoking and cooking in a single operation. Weight: 340 kg The press is easy to use. The machine is made of stainless steel and acid-resistant components. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm

Folding Sheet Press Heidelberg PS 86; cleaned; Format width max.86cm, min.12cm; Inlet length max.25cm, min.10cm; including coupling box 1. Pressing unit Heidelberg PS 86; Cleaned; Size max.86cm, min.12cm; Length max,25cm,min.10cm; included link box.

pressure: 60 t stroke: 400 mm daylight longitudinal/sideways: 820 x 300 mm dayligth: 900 mm liter capacity: 6,5 l feed down: 6,1 mm/sec feed up: 10 mm/sec Motor output: 2,2 kW weight of the machine ca.: 0,675 t dimensions of the machine ca.: 1,46 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 400 mm daylight longitudinal/sideways: 1010 x 300 mm Motor output: 4,0 kW liter capacity: 11,0 l dayligth: 900 mm table surface area: 1010 x 560 mm feed down: 4,8 mm/sec feed up: 7,5 mm/sec weight of the machine ca.: 0,9 t dimensions: 1550 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Rep M46 Injection Moulding Machine Size of platens 430x430mm Injection unit short volume 670cm3 Injection pressure 1690 bar Injection force 331kN

Manufacturer: HACO Model: PPM 30150 Year of Manufacture: 2007 Voltage: 380V 50Hz Capacity : 3000 x 150T Find more here - .ucymachines/ Contact us at - sales@ucymachines

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

pressure: 60 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 255 mm stroke: 165 mm dayligth: 475 mm working feed: 9,8 mm/sec return speed: 117 mm/sec ajustment speed: 150 mm/sec total power requirement: 5,5 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COLOGNE L2 YOC 1992 Rated current: 3.2 A (380V) 2 speeds (1,500 + 3,000 rpm) 2-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Drilling length: 200 mm Height adjustment by handwheel: 120 mm Altitude display via dial gauge in the handwheel Tischgr. 350 x 820 mm Keyless chuck 2 pneumatic workpiece clamps (safety clamping cylinders) Mitre stop (adjustable up to 60° on both sides) 90° plug-in stop Chassis Weight: 220 kg Manufacturer

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.

blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.

used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg

Number Of Stations: 32 // Output (caps/min): 500

Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg

Output (caps/min): 1500

Number Of Stations: 24 // Output (caps/min): 600

Air Pressure: 40 bar // Delivery Rate: 1630 m³/h

Air Pressure: 40 bar // Delivery Rate: 950 m³/h

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

pressure: 630 t diameter: 320 mm stroke: 310 mm total power requirement: kW weight of the machine ca.: 3500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

upper amp; lower Wila tooling 5 axes: X / X´ / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Backgauge: CNC Control: TS3 Passage between uprights: 2550 mm Max stroke: 265 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 9 kW Length: 3400 mm Depth: 1850 mm Height: 2820 mm Weight: 5 ton

KOMPLETE RUF ANLAGE BRIKETPRESSE RUF600 600KG/H YEAR OF MANUFACTURE 2009

Dynajet 1000 me, used, blue Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 427 h, Trolly, incl. gun, 10 m HD hose, 15° flat spray nozzle,

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

Manufacturer: EXNER Model: PG 80 Year of Manufacture: 2014 The EXNER PG 80 is a four-column hydraulic tool testing press for testing stamping, forming, embossing, and drawing tools. It is designed for high precision and durability, with modern proportional hydraulic control and digital force display for tool setup and testing. Technical Data Press Ram - Number of press cylinders: 2 pcs - Nominal force (adjustable): 2 × 400 kN - Return force: 2 × 150 kN - Stroke: 350 mm - Ram width: 2100 mm - Ram depth: 840 mm - Guide length: 750 mm - Ram speed under load (100%): approx. 0–10 mm/s - Ram return speed: approx. 0–20 mm/s - T-slots (DIN 650): 18 mm - T-slot pitch: 150 mm Installation Space - Installation height (top to bottom): 550 mm - Table width: 2100 mm - Table depth: 840 mm - Table T-slots (DIN 650): 18 mm - T-slot pitch: 90 mm - Table passage (W×D): 1300 × 120 mm (to be  ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 50 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 440 mm   table surface (front-back): 360 mm   spigot hole diameter: 40 mm   stroke: 90 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 300 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 700 mm   space requirements -front/back-: 1295 mm   total height: 2360 mm   total weight approx.: 3000 kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 860 mm   table surface (front-back): 620 mm   thickness of bolster plate: 70 mm   opening in bed (diameter): 165 mm SLIDE   table surface (left-right): 570 mm   table surface (front-back): 390 mm   spigot hole diameter: 50 mm   stroke: 120 mm   stroke rate (max.): 67 /min SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke min.: 9 mm   stroke max.: 120 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1420 mm   space requirements -front/back-: 1700 mm   total height: 2990 mm   total weight approx.: 5600 kg

Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.

Eccentric press PEE I 250, in working conditon.

Rutil Vertial Injection Moulding Machine Year of manufacture: 2001 Type: Injection Configuration: Vertical Clamping force: 350 tons Injection volume: 2000 cc Upper intermediate frame: Yes Lower intermediate frame: Yes Heater plate dimensions: 600×650 mm Tie bar distance: 600 / 340 mm Additional heating option: Yes Sliding plate: Yes

Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 65 tons/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1000 mm Dimensions of the tailgate: 920 x 1400 mm Bale weight: 350-500 kg Weight: approx. 13 tons Power connection: 400 V/ 22 kW Bale tying: automatic

Key data: 600 t

Max Tool length: 3000mm Max Tool Width: 2000mm Min Tool Height: 500mm Total Tool Weight: 20,000kg Max Closing Speed: 400 mm/sec

Simimpianti 3500×1300 veneer shelf press Shelf length 3500mm Shelf width 1300mm Two Batches Press on 8 cylinders Shelves heated with CO water Operating pressure max 300bar Piston diameter 80mm Machine Weight 7000kg Machine dimensions 435x160x235cmH Net price 65,000zł

Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg

Offer 25471 Specifications: - Compressive force 75 t - Projection approx. 300 mm - Table size approx. 800 x 600 mm - Height-adjustable table - Stroke adjustment approx. 16 - 140 mm - Plunger adjustment 80 mm - Stroke rate 80 rpm - Pneumatic connection - Drive 400 V - Space requirement approx. W 1800 x H 2450 x D 2000 mm - Weight approx. 4000 kg

It is a used, reconditioned Fortuna bun press fully automatic for sale. The machine head can be swivelled electrically and switched off with active movement. Weight range of the machine is 40gr. - 110gr. per piece of dough (30 pieces). Incl. 3 x plates (more plates on request). Price on request.