filling glass used for sale

Eurolux - Pressure Filler for glas bottles with 12 stations – Capacity 0,5l: to 650 bottles/h - NEW Technical data: - Capacity 0,5l: to 650 bottles/h, it is also possible for : 0,33l, 0,7l, 1,0l, 1,5l /other capacity - Installed power 0,37 kW - Weight: 240 kg - Measurement: HxWxD: 200 x 1000 x 1000 mm - With 12 stations - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A • Handling 1 Person • Operating Manual and Spare Parts List available. Video available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Lieder cream filling machine Speed 20 - 60 pcs / min. Volume 15 ml - 250 ml Induction sealing Capping machine

Automatic filling plant Logdos Späth GmbH Type K-DOS. F/AL 40/ EX EX protected mobile on wheels Programable X/Y axis and pallet image Very good condition, directly from production!

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

Technical details of the machine • Long pipe filling system with 40 filling valves and 8 KK punches. • Pre-evacuation system to reduce oxygen intake. • Hygienic bottle table and stainless steel components for durability. • Mechanical control range: 3,000 to 15,000 bph. • Capacity range: 0.33l LN 3000-13500 bottles/h, 0.5l NRW 3000-12000 bottles/h • Low oxygen uptake: maximum 0.02 mg O2/l. • Conversion parts for different bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the machine The machine offers numerous advantages that improve the quality of the filling process. • Quiet, product-friendly filling under a CO2 atmosphere. • 50-60% less CO2 consumption compared to short tube filling machines. • High durability due to reinforced drive elements. • Hygienic construction makes cleaning easy. • Short conversion times • Can be  ...

Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls

Type of machine: Semi-automatic dosing machine for loose products Portion: up to 2000g (2l) Accuracy: +/- 5g (available option +/- 1g) Power: 230V, 1 phase Emptying: foot-lever Material: food grade stainless steel Hopper volume: 120l (ca.50kg of roasted coffee) Dimensions(H x W x L): 1808mm x 751mm x 743mm LR 2.3 is designed for dosing such products as: coffee beans, nuts, seeds, grains, rice or noodles. The device is working in half-automatic mode. The operator pours the material to be portioned into the main container, then sets the desired weight and starts the dosing process. After weighing the required amount the operator puts a bag under the funnel and empties the weighing container by stepping on a foot-lever. The next charge starts automatically after the weighing container is emptied. In the meantime the operator ha ...

Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit

Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.

Pressure Bottle Filler. 24 fillers. System FALSCH FLASCHEN. Whole machine made in inox. Machine after total renovation in 2019. Warranty: 24 months.

Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right

Linear weighing and mixing machine, for mixing four different products - ideal for e.g. seeds, tea, muesli, nuts, pasta, sugar, salt, rice, general granular, granular products. The rotary version has a longer vibration path, which allows the particles to be better separated from each other, thus reducing the risk of jams. SPECIFICATIONS 2-HEAD SCALE: - 4 weighing heads each 0.5 litres, max. 300g/head - Weighing container capacity: 500 ml - Hopper: 8 l - Weight range: 5-300g - Accuracy: +/- 1.5-5g - Max. machine cycle rate at idle: 70 cycles/minute - Electricity: 220V, 1.2kW - Machine dimensions: L1028xW1078xH825mm -Condition: Year of construction 2024, but UNUSED AMTEC PLATF-SML - Frame/platform/rack for 4-head weighing systems - Feet and casters included - Frame dimensions: H 2660 x W 1350 x D 1000 m FOOT SWITCH: To open the weighing head during semi-automati ...

1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...

Can filling line KHS capacity: 25.000 cph by 500 ml cans filling product: beer and softdrinks can size: 330 ml and 500 ml cans can type: 211/202 consisting of: 1. Bulk can depalletizer LINKER DPG-500, year 2012 2. CanCeck TransTechHysek, year 2012 3. Can conveyor LINKER Conveyor RC/KHS, year 2012 4. Rinser LINKER Triplex Rinser TR/KHS, year 2012 5. Flush pasteurizer KHS Innopro 140/14/85, year 2012 6. Filler KHS Innofill Can DVD, year 2017 7. Seamer Ferrum F08, year 2012 8. Lid feeder NSM LidserverA30, year 2017 9. Conveyor KHS Innoline BTR, year 2012 10. Filling height control KHS Innocheck CUB, year 2012 11. Blowing Europool 12. Packing machine KHS Kisters SP0502, year 2012 13. Pack conveyor KHS Innoline GTR, year 2012 14. Handle applicator KHS CSM 050-2, year 2012 15. Packing machine KHS Innopack 035 B2+FS A-L, year 2012/2017 1 ...

Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible

Filing Line for non-returnable PET-bottles make KRONES, Kaeser, Comag, Lachenmeier capacity 14.000 bottles/h at 0,5l bottle 12.000 bottles/h at 1,5l bottle neck finish PCO 1810 filling product carbonated water, beer and soft drinks with 15°C and 8,0 g/l CO2 year 2004 packing 3 x 2 (with and without handle) pallet 4 x ¼ Plastic pallet (600 x 400 mm) 2 x half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) control Uni Siemens S7 300 kind of current TN-S-net, 400 V, 50 Hz This complete filling line for non-returnable PET bottles was manufactured in 2004 by Krones. The line is for production of high-performance beverages and it is in good condition. consisting of: 1. Blowmoulder-Filler-Bloc KRONES Contiform S08 Incl. preformtipper Tanner, Prefromconveyor Cooling Unit KKT Kraus KLC50N Mecafill VKP-PET 2880-80-113 Neckhandling Automatic butterfly ...

Automatic Granule Pre-made Bag Filler Sealer Seed Pouch Feeding Packing Machine This 3 heads 500g pneumatic particle feeding bag packing machine, which is suitable for rice and millet, cereals, vegetable seeds, cat and dog food, fertilizer feed, nuts and seeds, corn seeds, coffee beans, screws and nuts, hardware accessories, plastic products, electronic raw devices and other particle products quantitative, weighing, filling, sealing Parameters: Name: 500g granule seed feeding bag packing machine Sealing method: Four sided seal Minimum bag size: 913CM Maximum bag size: 1826CM Weighing range: 10-500 grams Packing speed: 5-15 times/min (depending on material) Precision: plus or minus 2g (depending on material) Voltage/power: 220V / 0.85KW (110V can be changed) Machine weight: 167KG Size: 9757175CM (length, width and height)

Make : ILPRA Model : FS 4000 Capacity : 4000 Volume of Filling : 100-500gr Pockets : 2x8 Cup Dispensing Filling Aluminium Lid Application Lid Sealing Fully Fuctional May be used for jam filling, but can work with other products like yoghurt or cream cheese. Electric power supply: 400V 50Hz 3N

mounted on a stainless steel base frame due to the completely pneumatic control (without electrics) suitable for filling disinfectant, Piston stroke: 5 ltr. - that means two filling operations for one 10 litre canister capacity: approx. 150 - 10 ltr. canister / h

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

Complete PET filling line Krones / Sidel Capacity: 33.000 bph Bottle size: 1,5 ltr. PET bottles Closure: short neck PCO 28 - 1881 Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm) Filling products: carbonated water and soft drinks Year of manufacturing: from 1997 - 2014 Condition: regulary maintained The line is out of production and immediately available. The line can be inspected. The line is consisting of: Blowing machine Sidel SBO 20 Serie III capacity: 36.000 bph year of manufacturing: 2010 neck size: PCO 28 - 1881 incl. cooling unit Trane-RTAC 185 year of manufacturing: 2003 incl. preform feeding: SIDEL-EBHS 2050 year of manufacturing: 2010 preform container: SIDEL-EBHS 2050 year of manufacturing: 2010 incl. preform tilting device SIDEL-EBHS 2050 year of manufacturing: 2010 incl. air conveyor system available Air co ...

PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors

Capsule Filler Encapsulator 400 caps/min. 24.000 caps/h

PET Aseptic filling line Sidel There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes Capacity: 36.000 bph by 0,5 ltr. and 0,4 ltr. 18.000 bph by 1,5 ltr. Year of manufacturing: 2006 - 2025 Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak. Over the years, all main elect ...

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

Used fluid packing machine in foil bags made by Unipak, type ASG 3T.

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

Used Stork monoblock. 32 fillers and 8 screw heads. For PET bottles. Dose adjustment on the pistons.

Used Hamba packaging machine for 75 mm cups. Capacity depending on the product up to 6400 cups per hour. Modernized in 2007.

Used Krones bottle filling line. New 2018/2020. Product: Beer Capacity: up to 45,000 bottles per hour / 500 ml Available bottle types: 500 ml The line is in very good condition. The offered scope includes equipment ranging from a new glass depalletizer to a labeling machine. The line consists of the following equipment: 1. Depalletiser of new glass Krones Pressant universal, KR74763 2020 2. Pallet transport Krones Palco, KR570AQ 2020 3. Residual liquid control Krones Separate laugekontrol, K069698 2020 4. Rinser Krones Moduljet, K563G22 2020 5. Filler Krones Modulfill, K129D84 2018 6. Pasteurizer + Beer buffer tank Krones Varioflash, KB76179 2020 7. Full bottle inspector Krones Checkmat 731 FM-G, K731CSR 2018 8. Dryer Krones Linadry 890, K890AFC 2018 9. Labeler Krones Topmatic, K071C85 2018 10. Labeled bottle inspector Krones Checkmat 731 EM, K731CSQ 2018 1 ...

Used KHS beer can filling line. New 2013. Product: Beer Capacity: up to 48,000 cans/hour (500 ml) or 41,000 cans/hour (568 ml). The line is in very good condition. The line includes the following devices: Depalletiser KHS INNOPAL ASH-LD Rinser KHS Filler KHS INNOFIL DVD 92 Seamer Ferrum FERRUM F708G Lid feed and storage system NSM MAGNETTECHNIK Filling height inspector KHS Innocheck CUB Can drying system KHS Printer Leibinger JET3up Pasteurizer + Beer buffer tank KHS INNOPRO flash pasteurizer KZE 250 CIP station KHS INNOPRO CIP 1-1000/3-3000/30A, 5 tanks Weighter Radwag DWT/RC 30 HP Shrink packer KHS INNOPACK SP A-M Pack transport KHS INNOLINE GTR Can transport KHS INNOLINE BTR Pallet transport KHS Innoline PTR Pallet Warehouse KHS Innoline MPH 1-1 Palletizer KHS INNOPAL PB1N1 Pallet wrapper ROBOPAC Genesis Futura 40 (from 2020) Control cab ...

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

Juice mixer, juice mixing plant. Fruit juice bottling Beverage mixing plant used. Manufacturer: Füllpack GmbH (Gea Group) Model: Fuellmix-MB Elo Filling Mix MB PLC S7 and Monitor Visualization Fuellpack Mixer 2 / Mixing plant 2 Power approx. 7000 - 15000 l/h Including Fischer-Porter flow meter; Valves, pumps, Panel Documents available Dimensions 2800 x 2100 x 2100 mm

Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW

Qty. 1 Second-hand carusel Monoblok filling line Mfc.: Stork Bepak B.V. Built: 1992 Type: VS 60/110/12LV Capacity: 20 000 Btl./h No. of filling stations: 60 pieces No. of closing heads: 12 pieces Size of buttles: 250, 500, 700 & 750 ml Inspector checking the fill level and cap Very good condition!

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

2 mobile filling machines, manufacturer unknown, function untested! Auction-ID: A7-45677-54

We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.

Filling machine, function unchecked! Auction-ID: A7-45677-52

Capacity: 6,000 - 8,000 cups/hrs Number of tracks: 4-lane longitudinal runner Closure: Sealing Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Please contact us.

Auction-ID: A3-43510-12048

Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...

Technical Specifications & Performance Data The Tetra Pak® TBA 8 is a proven aseptic carton filler engineered for high-efficiency beverage production within an industrial packaging environment. This second hand unit is optimized for small-format Tetra Brik packs and offers reliable performance for dairy and juice applications. Manufacturer: Tetra Pak® Model: TBA 8 Year of manufacture: 1989 Category: Filling Machine (aseptic carton) Production speed: up to 6,000 packs/hour Format volume: 0.06 L (60 ml) Container type: Tetra Brik (carton) Configuration: Linear (non-rotary) Fill type: Aseptic carton filling Number of valves: 1 Certificate for tank testing: Available Typical applications: Dairy, juice, functional beverages Advanced Automation & Control Systems Designed for consistent, repeatable performance, the TBA 8 leverages a robust control architecture typical of the Tetra Pak® ...

Technical Specifications & Performance Data The Alfatek 15/1 ISO INNOVAZIONE is a second hand, isobaric filling monoblock designed for professional beverage production of still and sparkling wines. Built in 2002 by Alfatek, this compact unit combines precision filling with reliable capping, making it a strong choice for a used bottling line dedicated to glass wine bottles. Manufacturer: Alfatek Model: 15/1 ISO INNOVAZIONE Year of manufacture: 2002 Configuration: Isobaric filler + integrated capper (monoblock) Filler valves: 15 Capper: 1 head (wine closures as per configuration) Nominal speed: up to 2,500 bph on 0.75 L still wine (actual output varies by product and settings) Container type: Glass bottles Bottle format: 0.75 L Products: Wine (Still), Wine (Sparkling), Spumante Filling technology: Isobaric counterpressure for sparkling products Safety: Safety features included; interlocked ...

Technical Specifications & Performance DataThis Pentablock Filling Monoblock combines rinsing, filling, corking, and wire-hooding in a single compact rotary frame for glass bottle handling. Manufactured by Mondial, the LD 16-16-3E/PK-1RF-1V configuration delivers robust mechanical design with precise bottle control across the rinsing, filling, capping, and wire-hooding turrets. It is suitable for second hand installations and integration into a used bottling line focused on beverage production and industrial packaging.Model: LD 16-16-3E/PK-1RF-1VBottle materials: GlassBottle formats: Compatible with 0.33L and 0.75L bottle formatsRinser turret: 16 grippers (rotary)Filler turret: 16 valves, gravity/light depression technologyClosures supported: Crown cap, champagne-style mushroom corkWire hooding: Integrated wire-hood applicator for champagne-style closuresHMI: Siemens OP73 MicroTypical ap ...

Recommended as a line with PT 8, closure applicator TCAP ReCap 2 and packer TCBP 62. The 1000 Base format is Tetra Pak's classic one-litre brick format. This TBA 8 offered here is from the V100 development stage. Like all of our Tetra Pak machines, this line is first subjected to a thorough incoming check. After the following cleaning and the extensive examination of the condition, we overhaul the machine with the necessary care. This machine is equipped with a TP MC control system and produces 6000 packs per hour. As with most Tetra Pak machines, we are happy to offer you these with the associated machines for an entire filling line. Regardless of this, we will be happy to advise you in advance and make you an individual offer. Please contact us or schedule a visit to our workshop to see the extensive work for yourself. From our extensive range of machines that we have in stock, we are  ...

Make : Ilpra Model : FS 5000 Year of Manufacture : 1996 Cup Size : 95mm Volume : 100 ml to 450ml Capacity : 4000 pcs per hour Voltage : 3 phase / 50Hz Air : 6 Bar HEPA Filter CIP Out Feed Conveyor Condition : Very Good Available : Immediately Previous Use : Yoghurt and Deserts Filling