134,098 used machines on RESALE, but how to find them? Machine Search
A horizontal flow-pack packaging machine Cavanna is available. An on-site inspection is possible.
Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...
Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surfa ...
Semi-automatic filling and sealing machine Monoblock Tenco Manufacturer Tenco Italy. Capacity: up to max. 500 pieces/hour depending on the product, filling quantity and operator Filling quantities: 50–1,300 ml, dosage can be set exactly. Bottleneck can be overlaid with nitrogen. With this machine you can fill everything. This filling and sealing machine is suitable for liquid and paste-like products in the food, beverage, cosmetics, pet food, honey, fruit brandy sector The machine is suitable for a wide range of product consistencies: liquid products are fed directly via a tank connection, while pasty products are filled via the optionally available hopper. Depending on the requirements, the machine is available as a bottle or bag filling system. Chunky products such as pesto, ketchup, soups and sauces can also be processed without any problems. Various capper ...
used
1 rotary Waldner cup filling machine for 95 mm cup diameter Output 4,500 EH per hour, type DOSO 2/2, 2 lanes and with S 7 control at 75mm to 250 gr. at 95 mm to 500 gr. and 1,000 gr. for cups, shaped like a "pot" with control cabinet and various cups suitable filling tools with crate manufacturing machine and 5 m empty-crate transport line Manufacturer Koch, year of construction 2011 with Nordson gluer dismantled
Used cup filler made by HUGART, type: DS20000. New: 2003. This machine is designed for packaging food products in cups. TECHNICAL DESCRIPTION The HUGART DS20000 is a modern, eight-row machine used in the food industry for sealing a full range of food-processed products in plastic packaging. The machine's modern frame design, integrated with a slat conveyor, allows for the installation of a series of primary and secondary workstations for filling, sealing, grouping, and packaging cups into work packages. The use of servo drives allows for smooth adjustment of the machine's output, up to 20,000 packages per hour with capacities ranging from 0.125 liters to 0.5 liters. The machine's primary material is 0H18N9 chrome-nickel steel. The design of the frame and individual workstations is designed to meet the strict hygiene standards of the food industry. DS20000 PACKING MACHINE DIMENSIONS ...
Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible.
Universal Filling Device Fritsch UFG-EPA-08RHG-NL20 Year of Make: 2008
Used capsule filling machine made by MG2 model G37N . New 1986 Capsule filling machine for filling #0, #1, and #2 capsules with pellets (gravity-fed filling; no compression). Includes #0, #1, and #2 formats and spare parts.
Universal Filling Device Fritsch UFG 20-30-8 Year of Make: 2002
Complete filling line comprising a vertical form-fill-seal packaging machine, a volumetric filling system, and a Videojet coding unit. CONDITION - Year of manufacture: 2025 - Condition: As new .run in for commissioning purposes only, never used in production MACHINE 1 - ULMA VTI 640 Vertical Form Fill Seal Machine - Manufacturer: ULMA - Model: VTI 640 - Year of manufacture: 2024 - Power: 12 kW - Voltage: 400 V - Phase: 3W+N+PE - Frequency: 50 Hz - Full load current: 21 A MACHINE 2 - GS Italia Volumetric Filler - Manufacturer: GS - Type: Filler 1100 cc X2 2.0 TVR40 - Year of manufacture: 2024 - Electrical supply: 24 V DC - Maximum pressure: 6 bar - Total weight: 180 kg MACHINE 3 - Videojet DataFlex 6330 Coding System - Manufacturer: Videojet - Model: DataFlex 6330 - Integrated directly into the ULMA VTI 640 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Bag filling and sealing machine Rianta PS Mako BFS 300 Year of Make: 2020 Condition: cleaned & tested Suitable for 2-core paper or plastic clip tape, 8mm wide, wire diameter. 0.6-0.8mm Capacity: 35 packs/min (depending on product) Max. product dimensions (LxWxH): 450 x 230 x 140 mm Air blower to open the bags Date Printer Incl. inclined conveyor belt, type: SF 1500
Overview This filling monoblock was manufactured by MBF in 2001 and is designed for the filling of hot fruit juice (up to 95°C). The Synchrofil LV operates with an atmospheric (gravity) filling system and includes an integrated capping unit for aluminum screw caps (MCA standard). The machine is equipped with 35 filling valves and 4 rolling capping heads. It is adjusted for 1.0 L and 0.5 L VdF glass bottles with a diameter of 89.5 mm. The machine runs clockwise l-r and reaches a capacity of up to 7,000 bottles per hour. It is equipped with automatic speed control, CIP tank for automatic cleaning, and closure control systems. Technical Data manufacturer: MBF model: Synchrofil LV 1200-35 / 240-4V year of manufacture: 2001 condition: used filling system: atmospheric (gravity) filling temperature: up to 95°C number of filling valves: 35 number of capping heads: 4 (rolling heads) closure typ ...
Pastry Filling Machine Jufeba FS-1 Year of Make: 2002 New sheet metal cover New filling block, PVC cpl. equipped (right) Capacity 3.5l Filling quantity per filling process 5 to 30 g Dimensions (WxDxH): 38 x 71 x 40 Pneumatic design, required compressed air: 6 bar
Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power.
Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute, Benhil 8358 Twin Filling Butter Portion Packer, Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight., Fully Refurbished 12 months ago spent over € 200.000, Key Features:, - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations., - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs., - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps ...
used
Refurbished Filler with Cap 88 in excellent condition 100V
Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute, Benhil 8358 Twin Filling Butter Portion Packer, Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight., Fully Refurbished 12 months ago spent over € 200.000, Key Features:, - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations., - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs., - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps ...
For sale is a small complete filling line for vinegar or oil in plastic bottles. Currently, the line is at 0.75 ltr. cylinders and has a maximum output of 4,000 bottles/h. The entire plant consists of the machines listed below: 1. Bunker for empty plastic bottles, about 6m long, capacity: about 400-600 containers 2. Kamman bottle sorting system type K23F Machine ensures that the bottles to be filled are transported out of the machine vertically, with the mouth facing upwards Sorting capacity: approx. 3,000-6,000 pieces/h 3. Conveyor belts 4. Leicht vacuum filler, make Cobert type Olimpia20/95 With 20 filling stations Dimensions: LxWxH: 1,520x1,250x2,330 mm Possible bottle diameter: 55-120 mm Built in 1989 6. Inkjet encoder, make REA-JET, for applying the lot marking or best-before date coding to the filled and sealed bottle Year 2008 5. Capper for plastic c ...
Overview This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)
A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible.
Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...
Complete aseptic line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1. Mixing plant, Manufacturer: Tetra Pak, Model/type: Alblend 10 2S FB, Year of m ...
Gelulleuse MACOFAR for CD20-type powder, Sold with 3 powder formats: 00, 0 and 1, Maximum theoretical speed: 20 000 / hour, 50Hz / 2.5kW, Net weight 800kg, Sold with its vacuum pump, Elec:: 3+N+P, Link to manufacturer: .romaco/products/product-details/cd-series
Overview This isobaric filling machine was manufactured in 2020 by Rizzolio. The machine is designed for bottle filling and is equipped with a double pre-evacuation system, making it suitable for products such as frizzante. It is currently stored and mounted on wheels for mobile use. No capper is included. The machine can be viewed in person at any time. Technical data Capacity: approx. 550 bottles/hour (0.33 L, depending on operator) Formats: 0.33 L / 0.5 L / 0.75 L (general range approx. 0.3 L – 1.0 L) Application: Bottle filling Configuration: Filling system with double pre-evacuation, integrated product pump, 3×6 air pipes Bottle diameter: approx. 55 – 90 mm Adjustment: Stepless adjustment of bottle diameter and height
Used, complete aseptic bottling line manufactured by Procomac. New: 2005. A controlled-contamination filling line with microbiological isolation, designed for filling products with a pH lower than 4.5. Suitable for PCO 1881 28mm bottles; sport-cap and flat-cap closures. General description of the system: Bottles delivered to the monoblock are completely sterilised with an oxidising solution, rinsed with sterile water and delivered to the filler. The bottles are filled by electrically controlled fillers and sealed using an aseptic capping machine. The caps are fed to the steriliser via a feeder and a belt conveyor in a positive-pressure environment using sterile air; they are sterilised with an oxidising agent (oxonia), rinsed with sterile water and fed to the monoblock via a positive-pressure feed channel with sterile air. The monoblock is equipped with a microbiological isolator ...
A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.
KRONES ROUND GLASS LINE Features: • Year 2003 • 500/600BPM @ 700ml, 750ml, 1 Litre • Wraparound Boxes • 6 & 12 Pack • Cold Glue Front, Back & Tax Strip Labeller Asset List: 1 Waste compactor; 2006; Orwak; 9020; 54414; 415/50 2 De Palletiser; 2003; Krones Kettner; Prress Uni Abscheiber;22/0142/012; 415/50 3 Rinser 72 heads; 2003; Krones; Variojet; K563-291; 415/50 4 Filler 108 heads; 2003; Krones; Isofil; 2880 072-126; 415/50 5 Capper 18 heads; 2003; Krones; Topmatic/ Zalkin; 734-203; 415/50 6 Label check; 2015; Logics & Control; Logilook; 2359; 240/50 7 Case packer; 2003; Krones Kellner; Wrapapac W60; K95-044; 415/50 8 Laner; Krones; Multidivider 9 Robot; 2003; Krones/Kettner; Robogrip Entlander; 22/0795/008; 415/50 10 Spiral Case Elevator; Amberflex; 415/50 11 Bottle coder; 2017; Linx; 7900; AN135;240/50
Overview The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011
STORK MINIATURE LINE Features: • 50ml Glass & PET • 200 BPM • Flask Oval Round • Self Adhesive Front & Back Labeller • CAP Size 18 X 12, 20 X 12 ROPP Asset List: 1 Manual bottle infeed 2 Bottle conveyors 3 Header tank stainless steel 4 Rinser filler capper; 1996; Stork; Block 36 head rinser, filler, 9 head capper. New PLC HMI fitted 2021; 415/50 5 Level control / case reject; 2017; Logics and control; Logilevel HF1400; 2723; 240/50 6 3 station labeller; 1996 ; Krones; Autocol; 747-264; 415/50 7 Checkweigher; 2022; Garvens; Safeline; 333968; 240/50 8 Scale check; 2017; Logics and control; Logiweight LS; 2721; 240/50 9 &10 Case packer; Ganz brothers; CB90; DS22392; 415/50 11 Case sealer; 1995; 3M; 800AF-E; 2247; 240/50 12 Case coder and reject; 2019; Linx; IJ375; JB590; 240/50 13 Case erector; Kettner 14 Carton spiral elevator; 201 ...
BERTOLASO LINE Features: • Flask & Round • Glass & PET • 200BPM • 100ml, 200ml, 300ml, 375ml, 500ml • Wet Glue Front & Back Labeller Asset List: 1 Case erector and spiral elevator; 2013; Bortolinkemo; 415/50 2 DEPAL; 2000; OSMEKA; VAE; 521-0742; 415/50 3 Bottle conveyors 4 Rinser, filler, capper; 2013; Bertolaso; Epica 32/32/8; PMDM010128; 415/50 5 Packing table; 2006; Hutton; Gravity roller; 240/50 6 Labeller; 1994; Cavagnino & Gatti; C4810; 415/50 7 Case packer; 2005; Aries; 602; 152; 415/50 8 Case sealer; 1995; 3M; 800 AF; 224; 415/50 9 Case coder; 2019; Linx; IJ375; JB494; 240/50 10 Level check; 2017; Logics and control / Bertolaso; Logilevel plus; 240/50 11 Case spiral elevator end of line; 2022; Ambaflex; Spiralveyor SV; 51947-02; 415/50
STORK GLASS LINE Features: • Round, Shaped, Tapered • 350ml, 700ml, 750ml, 1.14 Litre • 200BPM • Wet Glue Front, Back, Neck Labeller Asset List: 1 DEPAL; 1996; Osmeka VAE; 521-0136; 415/50 2 Carton erector with Nordson hot glue applicator; 2013; Bortolinkemo; 415/50 3 Rinser filler capper; 1996; Stork; RVR30/146-36-9 LW; 021.141.10; 415/50 4 Labeller; 1996; Cavagnino & Gatti; CG84CL3/18; B4900; 415/50 5 Laner; 1996; Stork; SIE1500PB3; 031.169.00; 415/50 6 Case packer; 1996; Stork; 415/50 7 Case sealer; 1998; 3M; 800Afe; 3158; 415/50 8 Scale check weigher; 2016; Logics & Control; Logiweight LS; 2513; 240/50 9 Spiral carton elevator; 2022; Ambaflex; Spiralveyor SV; 51947-01; 415/50 10 Spiral carton elevator; 2013; Ambaflex; Spiralveyor SV; 15432-02; 415/50
A horizontal flow pack packaging machine RGD Mape is available. Packaging speed: 30m/min, max. packaging capacity: 100packages/min, product length range: 30mm-450mm, product width range: 10mm-240mm, product height range: 10mm-120mm, max. film width: 600mm, max. film outer diameter: 350mm, film core diameter range: 60mm-110mm, max. film roll weight: 35kg, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible.
Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. Technical details Capacity: 9000 containers/h (varies according to bottle volume and product). Container Max. Diameter: 100mm Max. Height: 300mm Control Siemens S7 Single machines Bottle Hopper | ALWID | POSIMAT-ACCESS-N15 Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 ...
Used Plastic - Tube Filling and Sealing Machine Manufacturer: TGM Type E250 MATIC Year of construction 2006 Capacity: 800 – 3,200 tubes / hour Tube height: 50 – 235 mm Diameter: Ø 10 mm – 50 mm Closure: Hot air device (HA) Tube Loading Station with Magazine, Tube Alignment, Presence Control Tube, Tube Centration, Filling Station, Hot Air Group, Tube Coding, Tube Cutting Station, tube output, Various format sets and spare parts
Overview This filling monoblock was manufactured in 2000 by Germany MAG Schymanski. The machine is designed for the hot filling of juice and non-carbonated beverages. The system is equipped with 28 filling valves and 4 capping heads. The machine is already dismantled and stored. Technical data Capacity: approx. 3,500 – 6,000 bottles/hour Formats: 0.5 L / 0.7 L / 1.0 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: 28 filling valves / 4 capping heads
Glass Bottle Filling and Capping Monoblock KHS Innofill 32000 bph The KHS Innofill DRS-ZMS is a 80 filling valve, fully automatic rotary glass bottle filling and capping monoblock designed for the bottling of beer, carbonated soft drinks and other beverages in glass bottles. The filler was manufactured in 1997 and refurbished in 2023 with new Simens Simatic S7 series control system. The filler is a counter-pressure filler and it has two capping units integrated in one monoblock triblock. Both cappers has 15 capping heads, crown capper for glass bottles and screw capper for PET bottles, providing flexibility on production using the same production line. The KHS Innofill DRS-ZMS is a fully automatic electronic pressure filling system designed for hygienic filling of carbonated beverages. Product, gas and CIP media are supplied through hygienic, deposit-free sealing systems to ensu ...
Aseptic carton filler previously used for the filling of aseptic milk products in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) carton filler is designed for 1.000 ml Square cartons. Controls: 100V. Drawing spec: 648022-1001. Production hours: 69.621 hours. The machine has been running in in a juice factory in Europe. Line dismantled in KW 13 - 2026 and is now located in the warehouse of Hamburg Machinery in Germany. Including reel lifter., Additional features:, 1x Drive gear is missing below the folding station. List with article numbers can be send on request., Type of Machine: Aseptic carton filler, Capacity (Units): 5.500 cartons per hour, Packaging: 1.000 ml Square, Product: Juices, Controls: 100 V, Conveyors: No, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 69.621 h, Electric: 400/230 Volt - 50 Hz
12 Füll-Cork Kombinat aus Weinbetrieb Valves: 12 Year of Make: 1989 Format parts for 1l, 0.75l Bordeaux, 0.75 Burgundy Machine is fully functional!
Gellulier LGA, Machines for filling 100 capsules with vibrator., Current format: size 2., Dimensions (mm): 355x260 H 210
Offered is an automatic Saurer shuttle filling station for automatic emptying, filling, threading and adjustment of embroidery shuttles. Operating pressure: approx. 6bar, Capacity: approx. 144cycles/h, Magazine capacity: 100, Air consumption: 150Nl/min, Precision of the electronic bobbin thread tension measurement: 0.1mN, Control system: PLC. Machine dimensions X/Y/Z: approx. 3170mm/1100mm/1900mm. Inspection by appointment possible.
Complete packing line for liquid/gel products in sticks, comprising: Inever PH6/8 - 8 lane stick pack machine with 8 rotary piston pumps, currently set up for sticks of 23mm width and max. 160mm length, with filling volume of 10 – 14 ml, with adequate format parts, sticks of 17 to 35 mm width can be processed, reel diameter 600mm, reel width 640mm, fitted with Allen Coding device, electrics 400V/3Ph/50/ 60Hz, power consumption 10kW, required air pressure 6 bar, machine floor space approx. 2200 x 2100mm (WxD), machine height approx. 3100 mm, machine net weight approx. 2850 kg. Enflex ENF11 horizontal intermittent-motion cartoning machine, carton size from 50 x 50 x 15mm to 125 x 180 x 40mm (or 125 x 140 x 60m). Includes pre-folded leaflet inserter, Nordson ProBlue hot-melt unit for glue closure of the carton flaps, output up to 60 cartons per minute, electrics 400V/3Ph/50 Hz, power co ...
A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible.
The APV H4-380N 200 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 11 kW - 380-420 V - 50 Hz - 2.930 rpm - 21 A. Diameter of the impellor: 200 mm. Connections on the inlet: DN100. Connections on the outlet: DN65. Estimated capacity: ± 85-100 m3/h at a differntial pressure of ± 4,0 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1384, Diameter of the impellor: 200 mm, Motor: 11 kW - 380-420 V - 50 Hz - 2.930 rpm - 21 A, Current estimated capacity: ±85-100 m3/h at a differential pressure of ±4,0 Bar
Two identical filling machines are available. Output capacity for 100ml, 500ml, 1000ml containers: 17-18/min, output capacity 5000ml containers: 9-10/min, transport pitch: 317.5 mm, equipped with an operator panel, can separator, lid placer, lid closing unit and documentation. The machines are still new and unused. An on-site inspection is possible.
Overview This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery Fill level and closure inspection system | KHS Label inspection system | Indspect
Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available
Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Closure types: Crown caps Filling system: Isobaric (for beer and carbonated beverages) Product types: Beer and other carbonated drinks Incl. dummy bottles and ...
maximum number of results exceeded
please refine your search
