We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,964 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
-Type: Back pocket -Year: 2016
new
Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk
used
Manufacturer: Citus Kalix Model: KX 603 Year : 2011 Type: Automatic plastic tube filler Developed to fill all types of tubes available on the market: round, elliptical, etc. Hopper lifting truck ThermoChill I recirculating coolers Formats + associated parts available (details on demand) Documentation / full technical file General information : Capacity: max 60 units / min depending on product. Max product diameter : 50 mm Min product diameter : 10 mm Max product length: 230 mm Min product length: 50 mm Max fill volume: 400 ml Min fill volume: 1 ml
used
Flexi fill for ice cream model : 4000 Cups : 70mm and 95 mm ICe Cream Filler Capacity : 4000 Twist Fill Stations : Cups dispenser/filler/paper placing / lid / Conveyor
used
Monoblock for filling and sealing bottles. Capacity: 6000 bottles/hour in 370 ml Capacity: 7500 bottles/hour in 200 m Built in 1987 - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Equipment included : NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow box Filling tank + pump + heat exchanger + buffer tank before filling. 2 formats + spare parts available Machine controls : Detection of caps on bottles Fill level detection Minimum number of bottles (input) Max. number of vials (output) History, documentation and wiring diagram available; Spare parts available.
used
PET line for 0,5l Filler XRB 16, year: 1997 Power: 3000 bottles / St
used
Make : ILPRA Model : FS 4000 Capacity : 4000 Volume of Filling : 100-500gr Pockets : 2x8 Cup Dispensing Filling Aluminium Lid Application Lid Sealing Fully Fuctional May be used for jam filling, but can work with other products like yoghurt or cream cheese. Electric power supply: 400V 50Hz 3N
used
12fill VMP semi auto filling machine semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal
used
Automatic tube filling and sealing machine for PE and laminate tubes including: - Format set D.19 and D.35 - Tube magazine for empty tubes - automatic tube orientation - Hot air sealing unit Leister - Coding device on the tube fold on one side - water-cooled sealing jaws - cooling of the weld seam with cold air gun - Siemens PLC - 50L product hopper
used
FDB Cup Filler for Yoghurt Filling Per Time : 4 cups Cup diameter : 95mm Condition : Refurbished Available from order 60 days Stations : Cup Dispenser -Filling-Aluminium lid - Sealing -Conveyor
used
Overview The filler and capper block was built in 2006 by the German manufacturer Filltec. Techn. details Number of filler places: 32 Number of capping stations: 8 Magnetic cap elevator for crown corks Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage: 24 Volt DC Electr. protection class: IP 54
used
Manufacturer: MG2 Model: AlternA70N Year: 2018 Video available in operation on request Mechanical operating speed: 70000 capsules / hour Mechanical movement: alternating / discontinu Available formats: size 0 and size 1 3 dosing discs for size 0 capsules (18 - 16.5 - 15 mm) Supplier maintenance beginning of October 2022 before machine availability Air flow rate consumed: 18-21 m3/h Minimum pressure 650 kPa Net weight of the machine: 950 kg
used
Complete line for bottles composed of : Depalletizer, unpacker, bottle blower, filler- screw capper, cartoner, carton labeller, case packer and palletizer. Equipment out of production in 2020 Documentation available + lots of spare parts for each machine. 2 formats available. Capacity : 6000 bottles/hour in 370 ml 7500 bottles/hour in 200 ml. Complete line for bottles composed of the following elements: PRB Depalletiser - Destratus R99214 Year: 2004 Installation of PRB in 2004 Depacker / Accumulation table St Gobain Debalpack 800 Year: 1986 NO LONGER AVAILABLE : IMA Mystral - Bottle Blower Y16 LB3023 Year: 2009 Monoblock filling / sealing bottles: IMA Farmomac F370 18VL 8C Filler + screw capper / sealer 3700026 Year: 1987 Refurbished in 2004 NO LONGER AVAILABLE : Flexlink conveyor and accumulation table Year: 2004 Cartoning machine CAM HF ...
used
- Current format: capsule size 0 - 48 posts - Max capacity: 200,000 capsules / hour - Automatic checking weight - Year:? 2001 and full revamping in 2011 / 12 - spare parts available. - All documentation and pharmaceutical qualification files available
used
Manufacturer : Stoppil Model: EC6050 Type : Automatic linear filler Number of heads : 6 Product : Liquid or semi-liquid Capacity : 500 ml / 5 L Flowmeters : electromagnetic Tank : 316 stainless steel Poppet valve Cylinders: inlet / outlet Drip tray Conveyor 1 additional set of heads Documentation available
used
Manufacturer : Aximatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A
used
Manufacturer: Norden Model: NM 250 HA Year: 2003 Type: Hot air plastic tube filler / sealer Max capacity : 25 units / min Transport chain : 14 buckets Empty tube feeding : manual Tube printing centering 20 L hopper HA hot air device Ribbed or smooth sealing 1 side coding: 6 characters Verification check: no tube - no filling Available formats. Cutting recovery: CFM R154V hoover ThermoChill I Recirculating Coolers General information Filling volumes: 1ml - 300ml. Diameter: 10 mm - 50 mm
used
Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars
used
Manufacturer: ELF Year : 1989 Equipment modified several times by the manufacturer Stoppil Number of heads : 6 adjustable units Type of products : Liquid / semi-liquid Type of packaging : Cans, bottles, jars, etc. Operation: pneumatic Filling: gravitational Stainless steel hopper + level sensor Raise/lower cylinder Drip tray Conveyor Product stop cylinders Electrical cabinet Flexible feed hose with valve Variable speed drive for 2 feed pumps. Omron PLC
used
Selling a Fillog dosing machine in very good condition: Hourly capacity 150 kg Ideal for fruit puree Performance: 200-600 bottles/h Nominal performance: 300 L/H Electric demands: 0.1 kW, 24 V Material: WNr. 1.4301, AISI 304 stainless steel. food industrial PP Dimensions: 350x1100x1250 mm Weight: 40 Connections: DN 65 IP6S certified electronics Filling type: Volumetric Filling accuracy: + - 0.5% Filling temperaturg: 0-100°C Filling range: 5g-35.000g
used
Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...
used
Automatic dispenser for scattering crumble toppings like cheese crumbs, Chocolate crumbs, nuts, sugar on cake, chocolate, baked goods, icecream, etc. Machine in very good condition, Ready for operation.
used
BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS
used
Connected load: 60kVA, controls: SIEMENS SINUMERIK, length: 5650mm, width: 6200mm, height: 4320mm, weight: 26.57t, with documentation, without y-travel.
used
FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.
used
FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.
used
HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier ...
used
FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...
used
FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.
used
FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...
used
Manufacturer : Turbo tools ltd Model: NMD888 Type : piston dosing machine Mode : Automatic / semi-automatic (shot by shot) Operation : pneumatic Foot pedal action Adjustable dosing pump Feeding hopper Stainless steel 2 sets of filling heads available
used
• Designed for sealing cans with a round plastic film punched from the roll • With double punching station and double sealing station • Running direction from left to right • Station adjustment in running direction of the cans • Prepared to accept a conveyor belt (not included in the scope of delivery) to accommodate cans/bottles in transport buckets provided (not included in the scope of delivery) • Rationator transport buckets, type RATILIGHT Puck 1 for object sizes 50-1000 ml were used (see pdf). • Output max. 50-60 objects/min • Max. Object height 400 mm • Punching with punching knives • Existing die-cutting and sealing formats for film diam. 83.1 mm • Foil grid rewinding • PLC Siemens S7-300, Siemens Touch monitor • Drive 400V/50Hz
used
FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...
used
General SKU107S404 LocationBarneveld MakeFillworth No.70-19-97A Year of construction1997 Main Features MaterialStainless steel Volume10 Ltr. Specified Features - Processing vessel MaterialStainless steel Open stirring vesselVacuum lab mixer with discharge press (1x) Capacity10 Ltr Vessel sizesDia. 250x300mm Flat top sidecheck With covercheck OutletDia. 20mm With anchor stirrer(0-47 Rpm) With dissolver stirrer(0-1230 Rpm) Motorpneumatic Information With switchgearcheck Floorspace1,0x1,0 M Total height2,0 MProcessing vesselsFillworthProcessing vessels > Processing vesselsBrand > Fillworth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Continuous vacuum filler for straight filling, portioning, and twisting Optional: twisting and holding device All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Length: 90 Height: 165 Delivery time: 20 working days after advanced payment
used
Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 170 Lenght: 130 Height: 190 Delivery time: 20 working days after advanced payment
used
Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 5 KW Machine dimensions in cm: Width: 80 Length: 100 Height: 190 Delivery time: 20 working days after advanced payment
used
Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment
used
Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment
used
Robust stainless steel construction Barrel bottom and cylinder ram in stainless steel Round, mechanized barrel, internally grinded Perfect internal diameter and sealing High pressure for dens and cold removable mixtures Thermally protected motor Electric power: 1.5kW Length: 50cm Width: 70cm Height: 110cm Delivery time: 10 working days after advanced payment
used
Continuous vacuum filler for straight filling and portioning - Machine features: - All-in-one 250 l hopper with counter arm and reinforced scraper, - Integrated vacuum pump 20 mᶟ - Double screw - Standard double screw housing Control: РС Program memory for 99 filling programs, Portion weight: from 5 up to 60 000 g Lifting and tipping device for HPC with 250 l hopper To fit standard trolley, 200 l capacity Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 9,5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg
used
Hydraulic Piston Filler Mainca Made of stainless steel Dimensions: 65x50x125cm Electrical power: 1.1kW
used
100L stainless hopper, adjustable fill size on mobile stainless frame
used
Vacuum filler Handtmann VF 612 Fill, Portioniere, turning off with feeding accessories cpl. On request with attachment
used
Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.
used
The Handtmann VF 80B stuffer stands out for its exceptional efficiency, boasting a filling rate as high as 3,000 kg/h. This makes it an excellent choice for industrial-scale production. Its versatile portioning capabilities allow it to accurately fill amounts ranging from a mere 5 – 100,000 grams and it can exert a filling pressure of up to 35 bar. A standard 100-liter meat bin lift complements the stuffer. In set with casing holder and twisting Details: Brand: Handtmann Model Type: VF80B Volume: 80 liters Electrical Requirements: 400V 50Hz 3N Power Consumption: 4.5 kW Dimensions: L: 1650mm x W: 1050mm x H: 2100mm.
used
Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.
used
Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.
used
Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.
used
Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.