filing lin used for sale

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Linde E 14 with charger

Capacity: 4800 kg Lifting height: 3850 mm Free lift: 1590 mm Battery: 80 V, 805 Ah Operating time: 5 h Lateral valve adjustment weight: 4800 kg Tyres: 4 wheel, solid rubber Length: 3100 mm Width: 1500 mm Height: 2700 mm

A line for filling and packaging creams: 1. Inpucker for jars , type: FES201, producer: Groninger, year:2009 2. filler plus 1 mobile hopper, type: DFV 4005, producer: Groninger, year: 2005 3. Capper, type: MCS202L, producer: Groninger, year: 2005 4. Unscrambler cap, type:ZSK1200 ,producer: Groninger, year: 2008 5. Container and Elevator cap, type: DE120, producer: Groninger, year: 1994 6. Labelling cap, type: Gamma, producer: Promark, year: 2010 7. Depucker, type: Omikron, producer: Promark, year: 2010 8. Labelling base label,type: Gamma, producer: Promark, year: 2010 9. Labelling wrap label,type: Gamma, producer: Promark, year: 2010 10. Printer, type: Smart DateX10, producer:Markem, year: 2008 11. Inpucker, type: Paxinpacker, producer: Unilogo, year: 2010 12. Cartoning machine, type:AVV, producer: CAM, year: 2009 13. Mechanical turning  carton, Festo, year: 2011  ...

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Pfeiffer Type: BA251 Status: Rebuilt Warranty: 12 months Accessories: owner's manual Resources: Mineral oil or by appointment Suction power: 250 m ³/h Enddruckmit GASB.: approx. < 5x10e-1 hPa (mbar) Delivery time: approx. 1-3 weeks u.ue.V. Delivery: Ex works; ready for operation

Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: 4BST Box profile: 80x45 mm Agraffe: 3 hooks Clear width: 2,700 mm incl. inner position angle: W = 20 mm H = 28 mm load per pair of trusses 900 kg, at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembly our general assembly conditions must be observed Shelf insp ...

For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

Various sizes Control Panel for refrigeration installations. Container load batches, mixed models and types. We have hundreds available, please see pics for some examples

We offer 6x Piston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven

We offer 6xpiston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

800 x 600 460 mm

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

Complete line for production of twist off caps.

We offer you a used shelf connector here f. Double rack rows from the manufacturer Link 51 for sale. The shelving connectors are designed for a shelf spacing of approx. 400 mm. Specifications for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Included in the scope of delivery are: 01x Shelf connector used (consisting of 2 profiles) Suitable for: double rack rows Material color: anthracite Total length: approx. 515 mm Shelf spacing: approx. 400 mm U-profile: approx. 27 x 30 mm Weight/pcs.: approx. 1,321 kg /pc. 04x Hexagonal screws, M8 x 45 04x Hexnut nut, M8 04x Washers, M8

We offer you a used shelf connector here f. Double rack rows from the manufacturer Link 51 for sale. The shelving connectors are designed for a shelf spacing of approx. 300 mm. Specifications for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Included in the scope of delivery are: 01x Shelf connector used (consisting of 2 profiles) Suitable for: double rack rows Material color: anthracite Total length: approx. 415 mm Shelf spacing: approx. 300 mm U-profile: approx. 27 x 30 mm Weight/pc.: approx. 1,092 kg /pc. 04x Hexagonal screws, M8 x 45 04x Hexnut nut, M8 04x Washers, M8

We offer you a used shelf connector here f. Double rack rows from the manufacturer Link 51 for sale. The shelving connectors are designed for a shelf spacing of approx. 650 mm. Specifications for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Included in the scope of delivery are: 01x Shelf connector used (consisting of 2 profiles) Suitable for: double rack rows Material color: anthracite Total length: approx. 765 mm Shelf spacing: approx. 650 mm U-profile: approx. 27 x 30 mm Weight/pcs.: approx. 1,878 kg /pc. 04x Hexagonal screws, M8 x 45 04x Hexnut,M8 04x Washers,M8

Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...

Properties: Used labeling machine with labeling system Very stable design Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Technical data: Manufacturer: SRD Type: Stano/- Alone-Line Device: Valentin SPE 106/12 Semi-automatic labeling system for image and sound carrier See user manual, schematic and pneumatic diagram Changes and errors in the technical data as well as intermediate sale reservations Roller track The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line before or between production and mach ...