fg used for sale

x-travel: 1100 mm y-travel: 500 mm z-travel: 600 mm taper: ISO 40 P.D.B. table-size: 500x1250 mm volt: 400 V Control: Heidenhain TNC 410MA total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.

Multi-purpose surface sander, paint sander, modular unit, finishing unit, sanding unit, sanding station, belt sander -Max. sanding belt width: 1350 mm -Abrasive belt: oscillating -Drive: 11 kW -Speed: Frequency controlled -Sanding belt dimensions: 2620 x 1350 mm -Max. workpiece clearance height: 140 mm -Sanding belt unit: height-adjustable (conveyor belt fixed height) -Machine dimensions: 2210/2320/H2310 mm -Machine weight: 4500 kg

Servo motor three-phase motor, electric motor, direct current motor, pitch motor -MOOG: DC motor FGVR 180L4-DA-BC-C -Speed: 1250 rpm -Torque: 120 Nm -Voltage: 400 VDC -with: brake/fan/heater/encoder -Shaft: Ø 50 x 70 mm -Construction: B5 -Protection class: IP54 -Price: per piece -Number: 2 pieces -Dimensions: 920/448/H490 mm -Weight: 301 kg/piece

Manufacturer: Heesemann, Type: FGA 8, Year: 1994, Control: Heesemann, Monting of the machine: Längs / Bürste / Bürste, Sanding width mm: 1.350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Längsschleifaggregate: 18,5, Belt 1 shoe unit: 0,5 - 16, Elektronische Tastung mm: yes, Table hight adjustment by engine: no, Combi unit roller/shoe: 4,5 - 21, Table hight adjustment by engine: 1,85, Transportbandantrieb kW: yes, Intermediate sanding of lacquer: 5,5 kW, Programmanwahl extern: 3, 6 + 1,5 kW, Pressure pads for short workpieces: 250 + 150 mm, Levelling brush for paint: 4.500, Year :1994

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

x-travel:500 mm y-travel:250 mm z-travel:325 mm table-size:400 x 200 mm T-slots:10/ 20 mm T-slots:4 St workpiece height max.:300 mm template table:380 x 380 mm speeds::2500 - 20000 U/min no. of turning speeds:3 total power requirement:0,25 kW weight of the machine ca.:430 kg dimensions of the machine ca.:1000 x 1200 x 1500 mm

Qty. 1 Second-hand drilling, marking & deburring machine Manufacturer: Vernet Behringer Model: FG 2005 Built: 2010 Stopped: 2021 Plate size: 2000 X 1000 X 60 MM Max. load: 630 kg Tool changer: 8 Ø Drilling power: 16 kW, 160-4000 RPM Drilling diameter: max. 50 mm

Auction-ID: A1-40975-35

Auction-ID: A1-40975-6

Auction-ID: A1-40975-46

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/gtf4dKI3gy8 next after-sales service due in 415 operating hours. Reliable model with Nissan engine 3. Valve with sideshift Gas system has to be serviced, has misfires. Auction-ID: A1-45449-151

Komatsu FG15T-20 gasoline / lpg forklift truck in working condition. -Fully checked and inspected -1946 counter hours -Year of construction 2005 -Lifting capacity 1500kg -Lifting height 3 mtr -Duplex mast Auction-ID: A3-43511-4613

Manufacturer: TOS OLOMOUC Year: 1985 Type: CNC universal milling machine Numerical control: Heidenhain TNC 155 Strokes: X 850 mm / Y 500 mm / Z 450 mm Table: 1250 × 500 mm Spindle: ISO 50 – 1,800 rpm – 16 kW Feeds: 1 to 800 mm/min – fast X/Y/Z 2 m/min Installed power: approx. 22 kW Dimensions (mm): 2400 × 2300 × 2400 Weight (kg): approx. 5000 Notes: Robust CNC tooling universal milling machine from TOS manufacture. Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-218