fg used for sale

Light barrier, light curtain Transmitter & Receiver SICK 14-FGS FGSS1050-11 FGSE1050-11 Range: 0,0,3 - 6 m protective field height: 1050 mm 24 V DC 9 / 12 W IP 65 used ! Dimensions(Single): 1160 x 60 x 55 mm Dimensions: 1160 x 120 x 55 mm

Spring, 50 pieces THORSMANN type TTA-FGH 5590455 length. 111 mm Material: spring steel, Ø 2.0 mm Article consists of 5 bags with 10 springs each ! New ! Dimensions ( single spring ): 111 x 16 x 2 mm Dimensions ( packaging ): 120 x 60 x 20 mm

DC motor with tachogenerator BAUMÜLLER fGNF 132 MV ( fGNF132MV ) 19,5 / 36.9 / 36.9 / 19.5 kW 1000 / 1840 / 3100 / 6000 rpm 240 / 400 / 400 / 400 V DC external excitation: 310 / 310 / 116 / 58 V DC Flange: Ø 230 / 300 x 260 mm bolt circle diameter: Ø 265 mm 4x Bore: Ø 12 mm Tachogenerator: GHT 612/42 20 V at 1000 rpm with external control box main motor for machining center HELLER BEA 05 DC used, tested ! Dimensions: 1040 x 350 x 260 mm

DC motor GARBE, LAHMEYER & CO. FGL 180 K 24.9 kW 1530 rpm extraneous excitation: 180 V DC 400 V DC shaft: Ø 48 mm New !Shaft: Ø 48 mmbr /br /New ! Dimensions: 860 x 390 x 480 mm

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

Berlin filling device Model: Bn2 - Z new Doppelfüllstation for jams and medium-soft fillers for professional use in bakeries and pastry shops digital control with automatic dosage Stainless steel execution Extra hoppers available easy cleaning and operation

Tech. Data and more info on request

Product number: 1829 Type: FGM48SC Serial number: 7829 Year of construction: 1999 Belt width: 400 mm Product height: max 150 mm Needles: 96 pcs of 4 mm Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 32A Dimensions: 2300 x 1500 x 2300 mm Including self-cleaning protein filter FM80 and PFS5/225CS brine tank For boneless and bone-in products

Stainless steel multicellular centrifugal pump manufactured by GRUNDFOS. CRN15-05 A-FGJ-G-E-HQQE model.

x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grundfos pump, order number 96500570, power, 4 kW/ 50 Hz, good condition - ready for use

Product number: 2530J Type: FGM48-288T Serial number: 9020-2009R Year: 2009 Belt width: 420 mm,, walking beam Needles: 2 x 144 knives Product height: max 240 mm Power: 3 x 400V, 50Hz, 8A Dimensions: 2300 x 750 x 2300 mm

Grinding machine Heesemann FGA 6 Technical specifications: Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Elektronik control : yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Multicellular centrifugal pump manufactured by GRUNDFOS in stainless steel. Model CRN15-05 A-FGJ-G-E-HQQE General characteristics: Maker GRUNDFOS Model CRN15-05 A-FGJ-G-E-HQQE Guy Multicellular centrifugal pump Material Stainless steel Weight 93 Kg Specifications: Maximum flow rate 17 m3/h Maximum pressure 25 bar Maximum temperature 120 ºC Manometric height 70.6 m Engine 2917 rpm

Curing injector Fomaco FGM 48F SC BLP M3 Injector Tenderizer FGM48FSCBLPM3 + belt filter CBF 500, used Type: FGM 48F SC BLP M3 manufacturer: Fomaco A/S, Denmark (fomaco.com) Year of construction: 2015 Flexible injector tenderizer for meat, poultry or fish industry. Good condition, previous use in the field of fish. The M3 is a series of thoroughly tested, high-quality production machines designed for use in demanding and aggressive production environments. The "box-in-box" construction seals and protects critical electrical components and controls from the ingress of water, moisture and weathering. By using state-of-the-art pumping systems, dead zones and low-flow areas are eliminated, resulting in a constant pressure and precise flow rate. The result is an even distribution of brine - regardless of product, type, size and number of needles. With the BLP quick release system,  ...

Displacement of the X-axis: 850 mm Displacement of the Y-axis: 300 mm Displacement of the Z-axis: 420 mm Spindle holder: ISO 50 Spindle speeds: 45 - 2,000 rpm. Digital display: Heidenhain 2-axis Table size: 1200 x 320 mm Feed X and Y: 14 - 900 mm/min. Feed Z:4 - 250mm/min. Rapid traverse X and Y: 2,800 mm/min. Rapid traverse Z:800 mm/min. Equipped with: - Cooling device - Machine clamp Country of origin: Czech Republic Spindle motor: 5.5 kW Machine weight: 3,300 kg Machine LxWxH:300 x 270 x 200 cm

NILPETER MO4 – 8-color  Year 2010  8 colors including 6 offset DW2 – DW7  2 stamping units and register control  With roll lifter and edge control  2 Corona system Vetaphone 2 kw, Teknec web cleaning  First platform Delam Relam, turning cross on rail  MO stations : Color control system GMI Mircocolor 1 lifting control and color agitator  M - station flexo  Stamping unit : 2 stamping units 1 x with K B Gapmaster  Nonstop grid with transport wall  GEW UV system : Rhino/E2C  Cooling Unicold TAE 081  Baldwin Water Treatment Basic Liner 4.0 L  Main control panel with GMI  Silkscreen inserts 1 Stork RSI  Flexo: 3 cameras, ink pump  Lamination units : 3 stations on rail Down or up  1 plate bending system  BST camera (passport control) print formats 19 – 25 throughout  with accessories   ...

Vertical multistage high-pressure centrifugal pump GRUNDFOS As good as new pump, but part of the magnetic coupling was dismantled. Type CRN 10-09 MP-FGJ GI-V Year of construction approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Mains connection: 400 volts, 50 Hz Power: 3 kW - Pump construction in 9 stages - made of stainless steel 1.4401 - The new pump was used as a spare parts dispenser, but there are several new pump chambers - there is a part of the magnetic coupling missing suitable for drinking water supply, Irrigation and drainage Packed in the original wooden box Space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump; used

Available in stock 1 x Complete Containerized Gas Power Plant based on 1 x 725 kW Guascor FGLD 480. The power plant is mounted in a 40 ft container with its corresponding alternator, gas connection with regulation system, electronic control system and rest of auxiliaries (batteries, refrigerators, switches and control cabinets). Manuals and electrical diagrams are also available. The unit is in our warehouse - ready to go. Equipment in good working conditions.

Setter machine autonomous for pastry line Belt width 800 mm Settling length adjustable without substructure for sheet metal Condition very good, new settling belt

For margarine

The injector is a device for introducing brine solution through point injection of the raw product. Producer: Fomaco; Model: FGM 208 B; The machine has 208 needles (4mm diameter); The width of the tape is 740mm; The conveyor belt is not complete; Without brine filter; Length: 2300 mm; Width: 1200 mm; Height: 2300 mm; Weight: 1500 kg.

Brotschneidegatter, Fabr. Rösen&Robbert,

Manufacturer: Heesemann, Type: FGA 8, Year: 1994, Control: Heesemann, Monting of the machine: Längs / Bürste / Bürste, Sanding width mm: 1.350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Längsschleifaggregate: 18,5, Belt 1 shoe unit: 0,5 - 16, Elektronische Tastung mm: yes, Table hight adjustment by engine: no, Combi unit roller/shoe: 4,5 - 21, Table hight adjustment by engine: 1,85, Transportbandantrieb kW: yes, Intermediate sanding of lacquer: 5,5 kW, Programmanwahl extern: 3, 6 + 1,5 kW, Pressure pads for short workpieces: 250 + 150 mm, Levelling brush for paint: 4.500, Year :1994

This Strojtos FGS 63 NCP Milling machine was manufactured in the year 2004. It is equipped with a Heidenhain TNC 124 control unit and has 3 axis. The machine has a spindle speed of 56-2800 rpm.

Sony 3-axis digital, 23kVA. Including platform with 2 pallet stations, dimensions platform wxdxh approximately 455x220x155cm. Please note! The buyer is responsible for the dismantling and loading, after dismantling the threaded rods must be ground down and any electrics must be insulated. Pick up Thursday 2 May 2024 from 09.00-15.00 hrs, start dismantling 09.00 hrs. If necessary, dismantling and preparing transport can start on Wednesday 1 May.

incl. 1 toolbar 4 rows with nozzles; Digital control

Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available.

Key data: 260 KW, 400 V

GUASCOR FGLD180 Natural Gas Generator Set for sale. Make and Model: Guascor FGLD180 Operating hours: 31,284 Year of manufacture: 2010 Rated power: 260 kW V: 400 Hz: 50 Fuel type: Natural Gas Components: Engine and generator set, control panel and control unit, power panel, thermal recovery system consisting of a plate heat exchanger and thermal module for recovering exhaust fumes, containerized. The company decided to stop the plant because they were no longer in need of it. Price: 50,000€

Manufacturer: Heesemann, Type: FGA 6, Year: 1989, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Manufacturer: Heesemann, Type: FGA 6, Year: 1990, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: 40, Power belt 1 in kW: 11, Constant table hight: 950, Vacuum table: yes, Pressure pads for short workpieces: yes, Brushing unit: yes, Year :1990

Fomaco FGM 112 is a high-performance equipment designed to enhance the quality of meat and fish while increasing the yield rate. It is specifically suitable for working with bacalao fillets, as it offers extended clearance to accommodate them. The machine is equipped with two bridges, each featuring 112 Quadro needles with a diameter of 2.5 mm. The capacity of this injector can reach up to 15 tons per hour, depending on the product being processed. This injector fully complies with all sanitary and safety regulations, ensuring the highest standards are met while significantly reducing production costs. Additionally, it is equipped with a brine filter and a storage tank for convenient brine handling and storage.

Three-phase motor, electric motor -Power: 1.5 KW -Speed: 3000 rpm -Brake -Shaft: Ø 24 mm -Construction: B5 -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Weight: 25 kg/piece

Multi-purpose surface sanding machine, paint sanding machine, assembly kit, finishing unit, sanding unit, sanding station, belt sander, belt sander -Max. Sanding belt width: 1350 mm -oscillating -Drive: 11 kW -Speed: frequency controlled -Max. Passage height workpiece: 140 mm - Sanding belt dimensions: 2620 x 1350 mm -Dimensions machine: 2210/2320/H2310 mm -Weight machine: 4500 kg

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Servo motor three-phase motor, electric motor, direct current motor, pitch motor -MOOG: DC motor FGVR 180L4-DA-BC-C -Speed: 1250 rpm -Torque: 120 Nm -Voltage: 400 VDC -with: brake/fan/heater/encoder -Shaft: Ø 50 x 70 mm -Construction: B5 -Protection class: IP54 -Price: per piece -Number: 2 pieces -Dimensions: 920/448/H490 mm -Weight: 301 kg/piece

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 355/265/H250 mm -Weight: 28 kg

Inv. Num. : 7026 Type: FGW 170 4Z Producer: NS MAQUINAS Created: 2019 Parameters: Abrasive belt length: 2000 mm Abrasive belt width: 170 mm Workpiece width: 170 mm Max. workpiece height: 200 mm Belt speed: 10-25 m/s Number of abrasive belts: 4 Length: 3600 mm Width: 1200 mm Height: 2000 mm Weight: 2200 kg Equipment: Water Cooling

Guascor FGLD360 Gas Generator Se, ( it's same Waukesha as 36gld engine) but brand with Guascor assembler. Power 550KW, 675kva. year 1998,, Import from Europe not run local in Pakistan. Scope of supply: Complete Engine with alternator on skid with Gas street and PLC Control panel..

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Base jaws: type FGB 250/424 -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/100/H80 mm -Total weight: 4,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Base jaws: type FGB 315/425 -Jaw width: 32 mm -Dimensions: see photo technical. drawing -Total dimensions: 155/110/H75 mm -Total weight: 5,0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Base jaws: type FGB 315/404 -Jaw width: 32 mm -Dimensions: see photo technical. drawing -Total dimensions: 130/110/H100 mm -Total weight: 6,2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Base jaws: type FGB 315/404 -Jaw width: 32 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/105/H90 mm -Total weight: 6,2 kg