ferm used for sale

2 pieces HEIN fully automatic proofers, type: TopLine -as good as new- - incl. 2 trolleys, front axle, 20 cushions, 80 x 60 cm - incl. 2 trolleys, front axle, 19 cushions, 80 x 60 cm The 2 proofers are in very good condition. Sold due to closure. Hardly been in use. More pictures and information on request.

1x Fermenter (plant) BIOSTAT Type: C-CDU Reactor: Type: C-10-2 Volume: 15 liters Prod.Nr.: 235 SUS Manufacture: 2001

Air conditioner – "The ideal solution for climate control in proofers and prepared rooms." Features: - Energy-saving - Easy installation and operation - Device dimensions W x D x H: 425 mm x 205 mm x 1650 mm - Temperature and humidity adjustable - For fermentation rooms up to 12 m³ - Plug-in free-standing device Connection 400V, 16A-CEE plug New device with warranty + spare parts service

Applikon Pilot System 50L fermentation system Stainless, 50L pilot fermentation system

Miwe GR Proofing Cabinet Proofing Room for 4 Rack Cars Sheet Metal Trolley - Miwe fermentation room - Suitable for 4 trolleys each 60x80cm or 2 puller trolleys - With Miwe FP control External dimensions approx.: 163cm wide 245cm deep 258cm high The fermentation is dismantled immediately Available in the warehouse in 33647 Bielefeld.

- Fully automatic proofing cabinet for trays - Manufacturer: Gram (Bäkoline) - Type: GA 86 CCG L - Cooling, freezing, heating - With support rails - for 60x40cm trays and also 60x80cm trays - Year of construction: 2021 - Refrigerant: R290 - 230 Volt/ 50Hz 1778W - External dimensions: 238x82x106.5cm HxWxD - Interior dimensions: 147.2x67.8x86.5cm HxWxD - Temperature range: -25 °C to +40°C - Cooling capacity: 882W at -25°C - Weight: 178.6 kg

Features Volume 20800 L Material V2A (AISI 304) 1.4301 Horizontal design Length 3550 mm Cylinder length 2180 mm Front diameter 2990 mm Rear diameter 2900 mm Surface inside 2B=IIIC ground Surface marbled on the outside Operating pressure 3 bar Operating temperature range 20° C Description Tank crest: Clapper bottom curved bottom Pressure relief valve Light connection 2x flange connection with cover at the back and front DN 200 Front: Manhole oval 410x310 mm Manhole round DN400 with disc valve DN 100 Tasting tap Dip shaft sleeve with temperature display analog Clarification drain with ball valve DN 50 Flange connection for sight glass DN 200

Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 1000l, level indicator: available. An on-site inspection is possible.

Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 330l, level indicator: available. An on-site inspection is possible.

Standard descriptionPROOFING ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying of the

with automatic emptyingStandard descriptionFERMENTATION ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying

Fermentation belt carrier tilting planks with trolley32 pieces tipping planks with trolleyManufacturer: RingoplastType: Baked goods CombiDimensions: 580x390x48 mmInner dimensions: 567x377x45 mmMaterial: PolypropyleneWeight: 950 gWe have several in stockShipping costs please ask for details see picture

 Proofing belt support tilting planks Bakery Combi Manufacturer : Ringoplast Type : Bakery Combi Dimensions : 580x390x48 mmInterior dimensions : 567x377x45 mmMaterial : PolypropyleneWeight : 950 gSee pictureShipping costs please ask

Make: Applikon Type Pilotscale PS 130 consisting of: 1. Applicon 130 liter bioreactor type PS 130L in stainless steel 316L electropolished Suitable for Mamilia - Product room 3 bar / vacuum - Double jacket 6 bar / vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, electrical cabinet, etc. - Mounted on frame and mobile - cGMP standard

Cell Culture Bioreactor System / Fermentation System Make: Applikon Type Pilot Scale PS 30 consisting of: Applicon 30 liter bioreactor type PS 30L made of stainless steel 316L electropolished Suitable for families - Product chamber 3 bar / vacuum - Double jacket 6 bar/vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, control cabinet, etc. - Mounted on a frame and mobile - cGMP standard Extensive documentation

On offer is an industrial fermentation control system of the Kemper brand (fermentation interrupter / proofing retarder) from a former industrial bakery. The system was used for controlled dough guidance (fermentation delay, fermentation interruption and final cooking) and is ideal for bakeries, production companies or dealers for bakery technology. Manufacturer: Kemper Type: Fermentation interrupter / fermentation delay system Design: Double chamber with control unit and viewing windows Condition: used, removed from ongoing production. The system is complete, a precise technical inspection has not been carried out, so the device is offered as used and untested. The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of th ...

Construction year: 2019, Capacity: 1200 Liters, Diameter: 1000mm, ID number: FA392943/6 & FA421254/9. Conical bottom, cooling jacket present, suitable for yeast indulgence. Auction-ID: A1-46397-201

Construction year: 2019, Capacity: 1200 Liters, Diameter: 1000mm, ID number: FA392943/2 & FA392913/7. Conical bottom, cooling jacket present, suitable for yeast indulgence. Auction-ID: A1-46397-202

Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...

Fermentation tank 525 l pressureless, with cooling jacket and all fittings and thermometer - Speidel - Year of construction 2019 - Project: GÄRTANK -25- GTKASAU

Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coa ...

Overview These HERPASA self-emptying stainless steel tanks, designed as 30,000 liter autovaciante tanks, are suitable for wine production and similar beverage processing applications. The tanks are installed as a group of vertical stainless steel vessels and are equipped with bottom cone discharge systems for efficient product emptying and solids handling. The tanks are manufactured from AISI 304 / AISI 316 stainless steel and feature a 45° bottom cone, rectangular access doors, cooling jackets, temperature monitoring, product connections, and an internal mechanical extraction / rotating discharge system. The available drawings and photos show a robust industrial tank configuration with cooling surfaces, lower discharge equipment, and external piping for wine circulation or transfer. The tanks are particularly suitable for applications such as fermentation, storage, cooling, wine proces ...

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

4 x tank, net volume: 1500L, gross volume: 1900L, dimension approx: 350x140 cm (hxdia) - measured including base. Location is not suitable for heavy equipment. Border of the work area will be removed in advance. Any coolant will be removed beforehand. Auction-ID: A1-46820-13

4 x tank, net volume: 3000L, gross volume: 3800L, dimension approx: 455x140 cm (hxdia) - measured including base. Location is not suitable for heavy equipment. Border of the work area will be removed in advance. Any coolant will be removed beforehand. Auction-ID: A1-46820-14

Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt, Additional title: Outdoor tanks, Capacity: 58000 l, Operating pressure: 2 bar, Operating temperature: 20 °C, Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling, Height: 10,68 m, Material: stainless steel, Position: vertical, Base construction: Short skirt support, Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve

Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 7 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...

Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks., Additional title: vertical, coolable, insulated stainless steel tanks, Gross volume: 30200 l , Pressure capacity: 0,99 bar, Max. operating temperature: 40 °C, Cooling area: 14,45 m², Length: 2,83 m, Width: 2,83 m, Height: 7,86 m, Weight: 3150 kg, Material: stainless steel, Position: standing frame, Features: insulation, tank fittings

5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: coolable tank, Volume: 21798 l, Working pressure: 0,1 bar, Width: 2,95 m, Height: 4,2 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet DN50, manhole

Vertical stainless steel tanks with multiple cooling zones and various fittings. Most recently used as fermentation tanks for beer., Additional title: Vertical, coolable stainless steel tanks, Capacity: 20500 l , Operating pressure: 0,3 bar, Width: approx. 2,80 m, Height: approx. 4,20 m, Material: Stainless steel, Position: Vertical, Base construction: on feet, Features: manhole; cooling jackets; spunging apparatus; sampling valve

Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame., Additional title: coolable stainless steel tanks, 3 tanks each: 20500 l, 1 tank each: 11600 l, Material: stainless steel, Position: free standing, Base construction: Vertical cylindrical tanks on square tube feet, Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses

A vertical stainless steel tank with multiple cooling zones and various fittings. Most recently used as a fermentation tank for beer., Additional title: Coolable tank, Capacity approx.: 11600 l, Width: approx. 2,3 m, Height: approx. 4,1 m, Material: Stainless steel, Position: vertical, Base construction: on 4 feets, Features: manhole; cooling jackets; spunging apparatus; sampling valve

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: Coolable tank, Volume: 21797 l, Width: 2,95 m, Height: 4,1 m, Weight: 2000 kg, Material: stainless steel, uninsulated, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet, manhole, DN50

Cylindroconical fermentation and storage tank - Ammonia or glycol cooled, 1 x cone cooling, 3 x frame cooling. - Swivelling cone - Stainless steel - insulated - Standing frame, short - Cleaning air fitting with safety valve - Vacuum valve, Additional title: Refrigerated stainless steel pressure tank for outdoor installation, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; temperature measurement

- Vertical fermentation tank with a capacity of 152.60 hl. Insulated, clad and equipped with overflow spout, jacket cooling zone and sampling tap. - Vertical fermentation tank with a capacity of 161.27 hl. Equipped with overflow spout, jacket cooling zone, yeast plug, spray head and lighting fixture. - Horizontal pressure tank with a capacity of 155.00 hl and a pressure capacity of 4.4 bar. Insulated and equipped with cooling zone, thermometer, safety valve, pressure gauge, sampling tap, hose level indicator and 2 spray heads. - Mobile yeast tank with a capacity of 8.00 hl and jacket cooling. - Temperature control., Additional title: stainless steel tanks for wheat beer fermentation, Total capacity (gross): 46500 l, Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control

Storage tanks with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets, Additional title: Vertical, coolable stainless steel tanks, Gross volume: 8300 l, Operating pressure: 0,9 bar, Operating temperature: 20 °C, Width: approx. 1800 mm, Height: approx. 4030 mm, Material: Stainless steel 1.4301, Position: vertical, Base construction: 4 x pipe feet, Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping

Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L  

Overview These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is require ...