fein used for sale

Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm -Weight: 2.1 kg

Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.3 kg

MAX CAPASITY 80 T

pressure: 25 t plate thickness: 4 mm no. of strokes: 60-160 Hub/min total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Specifications: Maximum turning length 90 mm Circulation diameter over bed 220 mm Circulation diameter over support 110 mm Center width 160 mm Bore 23 mm 3 speeds 350 / 700 / 1400 rpm

Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW . Speeds : 700 - 1400 - 2800 rpm .

Specifications: Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW in each case rotational speed via potentiometer To be set from approx. 100 – 2,300 rpm 3 preset speeds or 3 switching stages

dia. of draw-in collets: 20 mm internal taper of cone draw-in collets: MK max. radius to grind: 10 mm grinding wheel diameter: ca. 100 mm grinding width: ca. 25 mm total power requirement: 0,6 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,4 x 0,4 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Type designation: S0/68-11429 Max. Grinding wheel diameter: approx. 100 mm With accessories as shown in the pictures Approx. Onsite Dimension. (l x w x h): 720 x 410 x 1,340 mm, weight approx.: 150 kg

While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter max.: 100 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 550 x 500 x 1,200 mm

PRESS DESIGN   drive system: knuckle-joint   feedstock transport direction: right to left SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 22 to V-RING   nominal force: 25 to TOOL DIMENSIONS   lower table (left-right): 430 mm   lower table (front-back): 490 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 230 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 180 mm   sheet thickness max.: 5 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 180 mm &n ...

Precision Height Marker, Height Measuring and Marking Device with Fine Adjustment PRECISION MEASURING Tool Factory SUHL TGL 12016 marking height: 1000 mm measuring column cross-section: 30 x 15 mm measuring column length: 1030 mm foot: Ø 176 mm with adjustable measuring rail used, tested ! dimensions ( standing ): 176 x 156 x 1070 mm

Precision Height Marker, Height Measuring and Marking Device with Fine Adjustment PRECISION MEASURING Tool Factory SUHL TGL 12016 marking height: 1000 mm measuring column cross-section: 30 x 15 mm measuring column length: 1030 mm foot: Ø 176 mm with adjustable measuring rail used, tested ! dimensions ( standing ): 176 x 156 x 1070 mm

Precision Height Marker, Height Measuring and Marking Device with Fine Adjustment PRECISION MEASURING INSTRUMENT FACTORY SUHL TGL 12016 Marking height: 750 mm measuring column cross-section: 28 x 18 mm measuring column length: 780 mm foot: Ø 175 mm with adjustable measuring rail used, tested ! dimensions ( standing ): 180 x 180 x 820 mm

Precision Height Marker, Height Measuring and Marking Device with Fine Adjustment PRECISION MEASURING INSTRUMENT FACTORY SUHL TGL 12016 Marking height: 750 mm measuring column cross-section: 28 x 18 mm measuring column length: 780 mm foot: Ø 175 mm with adjustable measuring rail used, tested ! dimensions ( standing ): 180 x 180 x 820 mm

SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min  &nbs ...

CONTROLS   PLC SIEMENS S5 SLIDE   total force (nominal): 160 to   stroke: 60 mm COUNTER RAM   nominal force: 80 to V-RING   nominal force: 80 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 600 mm   shut height max.: 335 mm   ram adjustment: 125 mm   distance between columns (H-frame): 630 mm   passline opening (free passage in side columns): 270 mm CROP SHEAR   cutting force: 150 kN DIMENSIONS / WEIGHTS   total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machi ...

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: link drive   feedstock transport direction: left to right SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 22 to   stroke: 8 mm V-RING   nominal force: 25 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 220 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 180 mm   sheet thickness max.: 5 mm &nbs ...

CONTROLS   electronic controls SLIDE   total force (nominal): 40 to TOOL DIMENSIONS   lower table (left-right): 280 mm   lower table (front-back): 280 mm   upper table (left-right): 280 mm   upper table (front-back): 280 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 100 mm   sheet thickness max.: 4 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1840 mm   total height: 1350 mm   total weight approx.: 2500 kg

SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 72 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 12 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 255 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 180 mm   sheet thickness max.: 5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1700 mm   space requirements -front/back-: 2420 mm   total height: 2420 mm   total weight approx.: 6000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   leveller unit: optional  ...

CONTROLS   PLC OMRON PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   shut height max.: 277 mm   ram adjustment: 80 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   nominal force: 6 kN   measuring wheel: no   band lubrication system: optional   band support rolls: yes DIMENSIONS / WEIGHTS   space requirements -left/right-: 1940 mm   space requireme ...

CONTROLS   PLC PNEUTRONIC PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 13 mm V-RING   nominal force: 75 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm STRIP-FEEDER   feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMEN ...

CONTROLS   PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN   drive system: servomechanic   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 70 mm   stroke rate (max.): 140 /min COUNTER RAM   nominal force: 625 to   stroke: 25 mm V-RING   nominal force: 1250 to   stroke: 25 mm TOOL DIMENSIONS   lower table (left-right): 600 mm   lower table (front-back): 600 mm   upper table (left-right): 600 mm   upper table (front-back): 600 mm   shut height max.: 380 mm   ram adjustment: 125 mm STRIP-FEEDER   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step min.: 0.1 mm   feeding step max.: 300 mm   sheet length min: 2500 mm CR ...

CONTROLS   PLC BECKHOFF PRESS DESIGN   drive system: knuckle-joint   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 67 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 125 to V-RING   nominal force: 125 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 560 mm STRIP-FEEDER   feeder type: roll feeder DIMENSIONS / WEIGHTS   total weight approx.: 14000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 15 mm V-RING   nominal force: 75 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm   distance between columns (H-frame): 560 mm   passline opening (free passage in side columns): 270 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step max.: 9 ...

CONTROLS   PC controller BECKHOFF C 6140 PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 410 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 8 mm/s   working velocity max.: 80 mm/s   return velocity max.: 150 mm/s COUNTER RAM   nominal force: 120 to   stroke: 40 mm V-RING   nominal force: 250 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 820 mm   lower table (front-back): 1250 mm   upper table (left-right): 820 mm   upper table (front-back): 1250 mm   shut height max.: 410 mm STRIP-FE ...

Description: SCHERER FEINBAU VDZ 220 XL DS Vertical lathe with Double spindle and Robot cell Serial number and Control Serial number: 68333 Control: SIEMENS Sinumerik 840D sl Working area Workpiece height max.: 200 mm Workpiece diameter max.: 250 mm Rotation diameter max.: 390 mm Spindle stop-turret distance max.: 580 mm Spindle stop-turret distance min.: 240 mm Spindles Spindle speed max.: 5500 rpm Spindle power per spindle: 37.7 kW Spindle torque per spindle max.: 300 Nm Spindle head with short taper (DIN 55026): A6 Axis travel X-axis axis travel (in the work area with closed cover): 365 mm Axis travel X-axis (total): 886 mm X-axis axis travel (via turret centre): -20 mm Axis travel Y-axis: +100/-80 Axis travel Z-axis: 250 mm 12-position disc turret VDI 40 All tool positions driven Max. speed (25% ED): 4000 rpm Max. power (25% ED): 10 kW Torque max. ...

indexing:Länge = < 1050 mm table::Teilungslänge =

swing diameter:400 mm control:840 D SIEMENS turning speeds:3500 1/min z-axis:340 mm x-axis:1350 mm workpiece height:400 mm Torque:820 turret head:12 Pos. rapid traverse:Z 30 / X 60 m/min tool holder:VDI 50 spindle head:A8 DIN 55026 spindle motor:60 kW weight of the machine ca.:14,8 t dimensions of the machine ca.:6 x 3,3 x 3,4 m live tools, C-axis, workpiece storage left side, high pressure pump, chipconveyor,

Multimaster FEIN 500, Quick Release, Accessories, Case

Huber Rotamat Feinstrechen, used Gap 5-12mm Qmax to 840 l / s Operating modes: Manual, automatic, backward More info and pictures on request.

Post Power Tools, High Frequency Tools, High Frequency Machines FINE 300 Hz 8 x Drill 2 x Jigsaw 1 x Angle Grinder (small) 1 x Rod Grinder Total 12 handheld tools. 220 V 300 Hz used, checked! unchecked! position can also be halved. Dimensions: 600 x 400 x 420 mm

Description: Control unit type ZHS-2/64 Nominal pressing force: 100 kN max. Nominal pressure: 6.5 bar Overrun time: 60 m sec Overtravel: 12 mm Safety distance: 110 mm weight approx.: 598 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 2,100 mm

Feinzeiger micrometer, without dial gauge Precision measuring tool factory Suhl 800 - 900 mm TGL 15046-1 pitch: 0.01 mm with protective box, dimensions: 1195 x 700 x 57 mm used, tested ! Dimensions (packaging): 1200 x 700 x 80 mm

Laska Inotec BJ 2009 3 hole plate machine performance up to 8000 kg discs depending on the fineness hour just a few hours 132 KW drive State Mint immediately available new price ca. 90.000 euro

Fritsch pastry line type Easyline - Built in 1999 consist of: Calibration head Cutting roller frame for 2 tools 1 piece worm roller Filling device, 4 rows - Year of construction: 2021 Guillotine various tools, folding shoes, etc. available after consultation Fritsch Croissant Plant Year of construction: 1999 composed of: Punching robot type CTR-700 Winder type CRH 400 (unfilled products)

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Number: 1x disc puller available -Price: per piece -Dimensions: 325/130/H135 mm -Weight: 7.3 kg

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Edition: mm -Number: 1x disc puller available -Price: per piece -Dimensions: 310/170/H200 mm -Weight: 6.7 kg

Description: Further information Komet fine adjustment head M020 02360 KFK1, in a case Includes accessories as per pictures - Drill rod Komet B00 15610 'UJ 8' - Drill rod Komet B00 15650 'UJ 16' - Drill rod Komet B00 15690 'UJ 24' - Reduction Ø 8 - L01 10120 - Reduction Ø 10 - L01 10130 weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 300 x 250 x 100 mm

Mounting shaft MK2 with pump, rotary union for coolant FEIN 6 39 03 070 03 7 for FEIN core drill including hand pump and centering pin New ! Dimensions: 320 x 140 x 80 mm

- Arbeitbreite 410 mm - min./max. Hobelhöhe 4 / 225 mm - 4-Messerwelle, FI 100 mm - Drehzahl 4500 U/min. - Motor 4,0 kW (5,5 PS) / 400 V - Motor Vorschub 1,1 kW (1,5 PS) - Absaugstutzen Durchmesser 120 mm - max. Spanabnahme 6 mm - Vorschub 8 / 12 m/min - manuelle Tischhöhenverstellung - 2 fein einstellbare Walzen im Dickentisch - Handrad mit Digitalanzeige zur Feineinstellung - Abmessungen L=1000, B=1000, H=1400 mm - Gewicht 450 kg

- Arbeitbreite 530 mm - min./max. Hobelhöhe 3 / 300 mm - 4-Messerwelle, FI 125 mm - Drehzahl 5000 U/min. - Motor 5,5 kW (7,5 PS) / 400 V - Motor Höhenverstellung 0,25 kW (0,34 PS) - Absaugstutzen Durchmesser 160 mm - max. Spanabnahme 8 mm - Vorschub 8 / 16 m/min - elektrische Tischhöhenverstellung - 2 fein einstellbare Walzen im Dickentisch - Handrad mit Digitalanzeige zur Feineinstellung - Abmessungen L=1200, B=1200, H=1400 mm - Gewicht 680 kg

oven 650 1.0x1.0x5m bogie 6 zones PLC data monitoring Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermi ...

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...

Jigsaw, high-frequency tool, high-frequency machine FEIN ASt 836 0,36 KW 1640 rpm 200 V 300 Hz untested ! Dimensions: 330 x 170 x 70 mm

Drill, high-frequency tool, high-frequency machine FEIN DS 848 0.75 KW 420 rpm 200 V 300 Hz untested ! Dimensions: 450 x 230 x 90 mm