fein used for sale

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

1 x lathe Feinbau PM 1 FZ Facilities: - Hand lever cross support with Tripan quick-change system - additional steel holder single steel holder on support rear - Electric drill rig for thread cutting - collet tension with tension ingenuity Technical data: - Spindle passage: 23 mm - Spindle speeds: 700/1400/2800 rpm (left/right) - Peak height: 110 mm - Tip width: 160 mm - Groesster circulation over bed:220 mm Accessories: 20 x drawer tension erases partly new (1 - 20 mm round) 1 x Interchangeable Holder Tripan with 2 different casts 1 x collet + suit rod in tailstock Operating instructions (Copy) Machine can be inspected under electricity.

Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products

specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg

clamping diameter: max. 17,5 mm grinding spindle speed: 4500 U/min relief angle: max. 45 ° total power requirement: 0,55 kW weight of the machine ca.: 120 kg dimensions of machine L x W x H: 0,54 x 0,47 x 1,31 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

free-standing crane system Dimensions: width x height x length, approx. 4 x 9 x 21m Two trolleys, 1000kg each In the build-up state

turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

MAX CAPASITY 80 T

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Specifications: Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW in each case rotational speed via potentiometer To be set from approx. 100 – 2,300 rpm 3 preset speeds or 3 switching stages

Specifications: Maximum turning length 90 mm Circulation diameter over bed 220 mm Circulation diameter over support 110 mm Center width 160 mm Bore 23 mm 3 speeds 350 / 700 / 1400 rpm

Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW . Speeds : 700 - 1400 - 2800 rpm .

CAPASITY 25/40

Industrial Screwdriver Fein AS sd 715-1 Data Industrial Screwdriver - Stick Wrench ASsd 715-1 Fein Elektronik ASsd 715-1 With transformer 42 volts / 40 watts, 1.0 A, 1000 rpm, Right/Counterclockwise Rotation (only screws on pressure)

Used Feintool HFA 4000 equipped with Feeder Line Saronni total force 2500-4000 kN blank holder force 200-2000 kN back pressure force 100-1000 kN shearing force 1000-3700 kN safety distance 14 mm FEEDER LINE brand SARONNI year 2006 - completely overhauled in 2012

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

Wabeco screwdriver with industrial screwdriver Fein AS sd 715-1 Industrial screwdriver: Fein AS sd 715-1 1000 rpm 42 V / 40 W / 1A Foot control by Hans Bernstein The hand lever is used to guide the industrial screwdriver upwards against the spring, hold the screw in position, release the lever and start the rotary movement with the foot switch. Due to the spring pressure and the dead weight, the screwdriving process is carried out without manual effort.

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill -Nominal input: 740 watts -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Edition: mm -Number: 1x disc puller available -Price: per piece -Dimensions: 310/170/H200 mm -Weight: 6.7 kg

Sabre saw, foxtail saw, tiger saw, reciprocating saw -Industrial jigsaw with: lubrication -Voltage: 220 V -Power: 750 W -Sawing capacity: wood/aluminum/steel 120/30/12 mm -Price: per piece -Quantity: 1 piece -Dimensions: 360/120/H300 mm -Weight: 6.8 kg/piece

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm -Connection: 220 volts -Price: per piece -Number: 11 pieces -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Angle grinder, cutoff grinder -Grinding wheels: Ø 125 mm -Power: 600 W -Speed: 8500 rpm -Price: per piece -Number: 3 pieces -Dimensions: 280/70/H120 mm -Weight: 2.7 kg/piece

Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm -Weight: 2.1 kg

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

U-Clamp Screw with Plate Fine Measuring Tools Suhl Range: 100 - 125 mm Accuracy: 0.01 mm TGL15046/I with protective box