feeder used for sale

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 350 mm   table surface (front-back): 330 mm SLIDE (MECHAN. PRESS)   stroke rate (min.): 250 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3800 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to SLIDE (MECHAN. PRESS)   stroke rate (min.): 200 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS   conventional PRESS FORCES   total force (nominal): 20 to SLIDE (MECHAN. PRESS)   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 38 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 1800 /min STRIP-FEEDER   feeder type: roll feeder ELECTRICAL SPECIFICATIONS   total power consumption: 20 kW DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg Coil Reel&Straightener KOHLER (option)

CONTROLS   PLC PNEUTRONIC PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 13 mm V-RING   nominal force: 75 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm STRIP-FEEDER   feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMEN ...

SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 72 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 12 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 255 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 180 mm   sheet thickness max.: 5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1700 mm   space requirements -front/back-: 2420 mm   total height: 2420 mm   total weight approx.: 6000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   leveller unit: optional  ...

CONTROLS   PLC BECKHOFF SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 70 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 22 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 200 mm   sheet thickness max.: 5 mm   feeding step min.: 0 mm   feeding step max.: 999 mm   pilot release system: yes   measuring wheel: optional ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS -FINEBLANKING PRESS-   waste cutter: y ...

CONTROLS   PLC SIEMENS S5 PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 400 to   nominal work capacity: 32 kNm PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 990 mm   thickness of bolster plate: 200 mm   height above floor level: 800 mm   opening in bed (left-right): 2250 mm   opening in bed (front-back): 280 mm SLIDE   slide force: 400 to   table surface (left-right): 2600 mm   table surface (front-bac ...

OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 400 mm   sheet thickness max.: 2 mm   coil weight max.: 4500 to   feed velocity max.: 30 m/min   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 4.5 to   stroke: 500 mm DECOILER   design: single reel   sheet width max.: 400 mm   sheet width (min): 50 mm   coil weight max.: 4.5 to   max. diameter of coil: 1400 mm   mandrel expansion range from: 390 mm   mandrel expansion range up to: 525 mm LEVELLER UNIT   sheet width max.: 400 mm   sheet thickness max.: 2 mm   sheet thickness min.: 0.75 mm   number of leveller rolls: 7   diameter of leveller rolls: 60 mm   feed velocity min.: 2 m/min   feed veloci ...

OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 400 mm   sheet thickness max.: 5 mm   coil weight max.: 3 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 3 to   stroke: 550 mm DECOILER   sheet width max.: 400 mm   sheet width (min): 30 mm   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet thickness max.: 5 mm   sheet thickness min.: 0.5 mm   number of leveller rolls: 9   diameter of leveller rolls: 50 mm   diameter of feed rolls: 150 mm STRIP-FEEDER   feeder type: roll feeder   roll diameter: 120 mm   pilot release system: yes ELECTRICAL SPECIFICATIONS   mains voltag ...

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

Uhlmann C2504 continuous motion cartoner, carton size range min. 30x15x65 mm (AxBxH), max. 80x90x155 mm (AxBxH) Blister/tray size range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), suitable for blister count from 1 - 12 blisters per carton, Leaflet/Booklet feeder (leaflets/booklets are automatically taken from their carton/trays and placed into the infeed system), the machine is also prepared to accept a GUK leaflet folder and feeder. Includes Wolke m600 advanced inkjet printer for variable data and codes, set up for reverse tuck cartons with Nordson PROblue 4 hot melt glue system for tamper evidence. The cartons discharge though a Pago Pagomat 6/2 labeller for top labelling (vignette/bollino) Electrics 400 V/230 V/50 Hz, 20 A, connected load 10kW Compressed air 6-10 bar Machine footprint ca. 7289 x 2041 mm (LxW) Height ca. 2254 mm Machine nett weight ca. 8000 kg Output u ...

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

· Rotary Die Cutting Machine with Magnetic Cylinder · Easily replaceable die · Automatic feeding with double sheet detection and automatic correction · Double magnetic cylinder with anti-splitting coating · Indicated for slit and semi-cutting in adhesives, labels, cardboard, etc. · High pile suction feeder · Touch screen · Machine with automatic stripping · Front registration TECHNICAL SPECIFICATIONS · Max sheet size: 480 X 740 mm · Min sheet size: 240 X 280 mm · Max final product size: 456 X 720 mm · Min final product size: 50 X 80 mm · Min distance (depends on the material): 5 - 8 mm · Max die size: 480 X 750 mm · Min die size: 160 X 100 mm · Die height: 1 mm · Die cutting accuracy: ± 0,1mm · Material thickness (die cutting): 0,2 - 0,5 mm · Material thickness (max creasing): 0,4 mm · Feeder stack height: 500 mm · Max speed (depends on t ...

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

M. No .: 45553I // Output: max. / min mechanical: 9000 copies / h // 2000 copies / h Formats: trimmed max. / min .: 30.5x34.9 cm // 8.9x14 cm Untrimmed max. / min: 31.1 x 35.5 cm // 9.2x14.6 Product thickness max. 1.0 cm pressed Consists: Feeder: 3x double vertical feeder (DVA 100) total 6 Stations // Gripper opening for folded sheets with pre-and post-fold (min.0.5 cm) vacuum opening without overfold / combined gripper. Stitching station: 2xHohner Universal 52/8 Trimmer Scale display Pressure vacuum generator Equipment / Additional information: -Compl. Replacement knife set -middle cut -1x replacement stitching head -Replacement chains -Finger + tongues - Conveyor belts changed 4 years ago Power supply: 50/60 Hz // 3x380 V (420) // 3x220V (200)

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. feeding device / work-piece-organizer Feldpausch OA 45-L manufacturer: Feldpausch type: OA 45-L manufacturer-series-nr.: 3/L year of construction: 1990 comm.-Nr.: 3990168/079 stock-nr.: 1445 + Regular Price: 2.950,- € > Reduced Price: 1.475,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) filling weight: ca. 100 kg filling volume: ca. 25 dm³ pot outer diameter: ca. 600 mm pot inner diameter: ca. 440 mm drive power: 220 V / 50 Hz power consumption: 550 VA protection class: IP 54 empty weight: ca. 120 kg standing area: W 750 x D 650 x H 950 – 1.250 mm color: greywhite / red Features vibr ...

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder o pallet feeder (MBO) o MC control 1st folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 2nd folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 3rd folding unit: o 2 buckle plates o rear-mounted slitter shafts o noise prevention delivery: o belt delivery ; working condition

Built in 1997 Size max 660 x 1.020 mm Equipment feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife o polyurethane-steel folding rollers delivery: o belt delivery ; working condition

Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife delivery: o belt delivery; working condition

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480

2002 Blister machine Marchesini MB 440 for PVC - ALU. from 1992 Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 305 from 2002 • Continuous movement machine • Automatic blister feeding GUK leaflet folder Bar code reader Booklet feeder System coding for the cartons Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm • Speed up to 240 cartons per minute Check weigher Garvens S2 from 2000

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

3 MONTHS LA-POSTPRESS WARRANTY Excluding electronics Offer consists of: - Single clamp perfect binder BQ-270 Horizon BQ-270 Single clamp perfect binders - Brackets: 1 - Spine gluing: Hotmelt - Side gluing: Hotmelt - Book block thickness: integrated measuring station (outside the pliers) - Milling machine: with suction - Milling depth: adjustable - Envelope feeder: suction drum feeder with 4-fold creasing - Technology: Touch & Work - Job memory: 200 memory slots for repeat jobs - Paper size: max: 320 x 310 mm; min: 135 x 115 mm - Envelope format: 660 x 320mm; min. 240 x 135mm - Book thickness: max. 50mm; min. 1mm - Turnover: 90 - 300 g/sqm - Handling stack height : max. 70mm - Power: max. 500 cycles/h - Dimensions: 2.720 x 910 x 1.545mm - Current: 400V/ 50Hz - 2.7kW - Weight: 900kg On request, we can organize the following points for ...

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.

DIRECTLY FROM THE PRINT SHOP Offer consists of: - Single clamp perfect binder BQ-280 PUR - 2kg drum melt from SM-Klebetechnik Horizon BQ-280 PUR Single clamp perfect binders - Brackets: 1 - Spine gluing: PUR - Glue filling: by barrel melting - Side gluing: Hotmelt - Book block thickness: integrated measuring station (outside the pliers) - Milling machine: with suction - Milling depth: adjustable - Envelope feeder: suction drum feeder with 4-fold creasing - Technology: Touch & Work - Job memory: 200 memory slots for repeat jobs - Paper size: max: 385 x 320 mm; min: 135 x 105 mm - Envelope format: 660 x 385mm; min. 225 x 135mm - Book thickness: max. 50mm; min. 1mm - Turnover: 80 - 350 g/sqm - Envelope stack height: max. 70mm - Power: max. 500 cycles/h - Dimensions: 3.055 x 905 x 1.520mm - Current: 400V/ 50Hz - 2.7kW - Weight: 900kg O ...

Offer consisting of: Horizon SmartStacker - SMST-F Smartstacker offline incl. Near-Line Feeder (08/2013) - SMST-FBR Barcode Control (08/2013) - SMST-EV Suction Funnel / Trim Coveyor (08/2013) -Accessories: - SMST ionization (06/2019) - SMST sensor set (7 pieces) (06/2019) - Format: max. 762x530mm; min. 279,4x330mm - Final format: max. 380x530mm; min. 100x105mm - Paper weight: 80 – 370 g/m² - Paper thickness: 0.1 – 0.381mm - Feeder: 800 mm (only offline and nearline necessary) - Destacking capacity: max. 254 mm - Panel processing: 1 – 28 blanks per B2 sheet - Speed: max. 4,600 sheets/h On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

Bosch MLF 3002 intermittent motion filling and closing machine for injectable vials. Includes rotaty table for empty vials, 4 rotary piston filling heads (currently filling 100ml), stoppering inserter with bowl feeder, and closing system for ALU caps with bowl feeder. 90 degree reject to the rear of the machine, and product discharge in line with product flow. Suitable for containers up to 55mm diameter and up to 185mm high (double index), inserts and caps up to 36mm diameter. Output approximately 6,000 containers per hour.

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

suitable for XL 105, SM / CD 102, can be converted to standard feeder, Preset or Preset Plus feeder

Digital Printing Machine Ryobi Presstek 52DI Year of construction: 2007 The Presstek DI press integrates seamlessly with Macintosh and Windows workflows. The files are sent directly to the printing press via RIP. Text, images, and imposition can be reviewed on the DI's monitor on the press or using a hardcopy proofing solution. Function Presstek 52DI Maximum print speed 10,000 sheets per hour Sheet orientation in landscape mode Sheet thickness: 0.0024 inches – 0.02 inches (0.06 – 0.5 mm) Maximum sheet size: 20.47 x 14.76 inches (520 x 375 mm) Image resolution/frame time 2540 dots/inch (100 dots/mm) / 4.5 minutes Automatic change over 10 minutes Color zones, rollers / forming rollers 16 color zones / 15 color rollers per unit / 4 forming rollers Feeder Rotary Stream Feed with Suction Feeder Board Feed stacking capacity: 19.69 inches (500 mm) / delivery 15.75 (400 mm) ...

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

DIRECTLY FROM THE PRINT SHOP Offer consists of: - Single pliers perfect binder BQ-270 Horizon BQ-270 Single pliers perfect binder - Brackets: 1 - Spine gluing: Hotmelt - Side gluing: Hotmelt - Book block thickness: integrated measuring station (outside the pliers) - Milling machine: with suction - Milling depth: adjustable - Handling feeder: suction drum feeder with 4-fold creasing - Technology: Touch & Work - Job memory: 200 memory locations for repeat jobs -Paper: max: 320 x 310 mm; min: 135 x 115 mm - Envelope format: max. 660 x 320mm; min. 240 x 135mm - Book thickness: max. 50mm; min. 1mm - Envelope thickness: 90 - 300 g/sqm - Envelope stack height : max. 70mm - Output: max. 500 cycles/h - Dimensions: 2,720 x 910 x 1,545mm - Power: 400V/ 50Hz - 2.7kW - Weight: 900kg If you wish, we can organize the following points for you: Pa ...

DIRECTLY FROM THE PRINT SHOP Offer consists of: Horizon Smartslitter SMSL - 100 Cutting, creasing, perforating in longitudinal and transverse direction SMSL-100 SMSL-CA SMSL-PR longitudinal perforation unit PRF-36 SMSL-CV SMSL-ST Card Stacker - 3 functions in one operation - Total running time: only 61 hours - Control: TouchScreen - Feeder: Flat stack feeder -Format: - Sheet format max. = 370 x 670 mm (unprocessed) - Sheet format min. = 210 x 210 mm (unprocessed) - Sheet format max. = 370 x 670 mm (machined) - Sheet format min. = 48 x 50 mm (machined) - Paper weights: - Uncoated: 80 - 350 g/m2 (80 - 200 g/m2 with PRF-36) - Coated: 100 - 250 g/m2 (128 - 256 g/m2 with PRF-36) -Equipment: - Pressure offset correction by brand reading by camera - Optimal setup of PDF or JDF data via PC - Recognition of register marks, 1D and 2D barcodes by camera -  ...

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

HORIZON BQ 280 YEAR: 2013 COUNTER: APPROX. 700.000 – 1 CLAMP PERFECT BINDER - CLAMPS: 1 - SPINE GLUING: PURE - GLUE REFILL: BY PRE MELTER - SIGHT GLUING: HOTMELT - BOOK BLOCK THICKNESS: INTEGRATED MONITORING STATION (OUTSIDE THE CLAMP) - MILLING SECTION: WITH EXTRACTION - MILLING DEPTH: ADJUSTABLE - COVER FEEDER: SUCTION DRUM FEEDER WITH 4X SCORING - TECHNOLOGY: TOUCH & WORK - SAVEABLE JOBS: 200 MEMORIES FOR REPEAT ORDERS - SHEET SIZE: MAX: 385 X 320 MM; MIN: 135 X 105 MM - COVER SIZE: MAX. 660 X 385MM; MIN. 240 X 135MM - BOOK THICKNESS: MAX. 50MM; MIN. 1MM - COVER WEIGHT RANGE: 90 - 300 G/SQM - COVER PILE HIGHT: MAX. 70MM - SPEED: MAX. 500 CYCLES/H - DIMENSIONS: 3,055 X 905 X 1,520MM - POWER: 400V/ 50HZ - 2,7KW - WEIGHT: 900KG

Folding machine Shoei Model Mach Eight Year 1995 Serial 7092 Size Min: 150 x 210 mm / Max: 470 x 640 mm Feeder suction wheel + stream feeder Folding configuration 2 plate buckles + 1 knife Delivery detachable belt delivery Details Vacuum pump, noise hood, electronic speed control, sheets separations head Condition Rollers, belts, vacuum roller are all good Available direct

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Wide belt sander Boere TKKC+BKKC 1100 (bottom/top) Technical specifications: Machine type TKKC+BKKC 1100(bottom/top), in good condition, flow processing machine, with through-going feeder in machine. Motors number 6 works above the item, works beneath the item, Sanding width with infinitely adjustable speed 1100 mm Sanding rails 2 Rotating brush cleaner 2 Sanding rollers 2 Calibration milling heads 2 Sanding belt length mm 1900 Passage height max, mm 250 Hardness grade of roller in ° shore 60 Sensing of workpiece thickness mechanical Feedrate max m/min 25 Total connection kW Weight kg 6800 Machine type TKS / BKS, in good condition, flow processing machine, with through-going feeder in machine, number of motors 6, works above the item, works beneath the item, working width 1100 mm, with infinitely adjustable speed, motor size 4x15 Hp, with 2 rollers, 2 s ...

Brodpol pallet board production line We present a complete line for the production of pallet boards from the Polish manufacturer BRODPOL A line of fully automatic disc sawmills installed and perfected for production. The rope is installed higher, while the entire conveyor belt infrastructure transfers the material between the individual operations, and the waste goes to the chipper. The line consists of Cross feeder with cascade for feeding round wood 4 m Longitudinal feeder before fitting Brodpol TT 5/600/400G fitting. Installed power 166.1kw 3.1. The flis falls into the transport towards the chipper 3.2. The side planks fall on the cross conveyors and are transferred to the off-cutting machine 3.3. The pile is transferred to the centering table in front of the multi-rip saw. 4.WP-165 Double Spindle Multi Rip Saw Installed Mac 132.2kw Cross conveyors dump ...

BLISTER MACHINE FOR AMPOULES FARCON FC320 WITH VISION SYSTEM SEA VISION For thermoforming trays for ampoules, vials. Manufacturer: Farcon (MARCHESINI GROUP) Model: FC320 Year: 2002 Automomatic ampoules feeder on trays Pick and place system to pick up trays and place them on a conveyor Two-way conveyor Maximum forming depth: 42 mm Speed: 45 cycles/min Maximum forming area: Film width 254 mm; Film pitch 220 mm Maximum cutting area: Film width 248 mm; Film pitch 210 mm Maximum production: 63000 ampoules (1 ml)/h Hydraulic network: - Pressure : 1.5 to 2 bars - Connection : Ø 1/2" Gas - Temperature : 11°C to 15°C - Average consumption : 200 l/h Pneumatic network: - Pressure: 6 to 8 bar - Connection: Ø 3/4" - Consumption: 500 Nl/min Power supply: 400V 3-phase, 50Hz, 3A Power: 6kVA CARTONER CAM MODEL HV2 FOR AMPOULES Model: HV2 ...

M. No.: 91.05192 Speed: 9,000 cycles / hour Format (mm): max .: 300 x 360 Equipment / further information: - 3 x double feeder 1551 - 1 x cover feeder -1528.0417 - Presto stapling unit - 1550 - three-knife trimmer -1522 - belt delivery 1x set of spare knives for three-knife trimmers

CARIBA CARTONING MACHINE, C222 Year of construction: 2009 Automatic horizontal cartoner with intermittent motion. The machine is equipped with sachet feeder. TECHNICAL DATA Approx.. net weight: Kg 2000 Length: mm 3560 Width: mm 1700 Height: mm 1450 Feeder dimensions: mm 3150 x 1250 x 1570 Frequency Hz 50 Voltage Volt 400 Production characteristics: Capacity speed: 100 cycles/min Carton width mm: min max 15-150 Carton length mm: min max 55-250 Carton height mm: min max 15-50 Electric consumption: 4 Kw/h Pneumatic supply: 6 bar The product, fed by a dedicated belt, is introduced inside the carton. The closure of the front flaps and the passage of the case through the side accompanying belts complete the operating cycle.