feed pellet used for sale

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading

No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

For sale is a used pelleting line that has been pelletizing wood fiber-based fertilizer with cattle manure and digestate for the past four years (approximately 5,000 hours total). It incorporates components from various well-known manufacturers, including the Amandus KAHL pellet press/continuous mixer, Bühler hammer mill/conditioner, CPM pellet cooler, Wynveen pellet screen, and Rako/Apullma conveying technology. Capacity: 1. Wood chips with dried cattle manure: approx. 1.5 t/h 2. Dried, separated compost/dried digestate: approx. 2.5 t/h 3. According to the manufacturer, KAHL, the press can process up to 3 t/h of biomass. The customer is now restructuring their operations, making this line available for sale. The preferred option is to sell the entire line, but individual components can be purchased separately by arrangement. The customer is primarily seeking to sel ...

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads

Koller head with 5 wheels, used

TECHNICAL SPECIFICATIONS Manufacturer: ECOKRAFT Description: Pelletizing plant with two pellet pressing lines including bagging and packaging in small containers Type: Stationary Type: LP22 Year of manufacture: 2023 / Commissioning: 2024 Hours: 448 Essentially consisting of: - Hacker HA1100 for shredding coarser raw material - Discharge belt with overbelt magnet - Conveyor belt with permanent magnetic roller - Granulator SMC 500/700 - Extraction via pipe and hose lines - SMU60 filter system - 2 x MB3LX material bunkers - Dosing systems - 2 x LP22 pellet mills - 2 x conveyor belts for screening plants - 2 x FT screening plants - Bagging machine AS900 Detailed technical description on request.

Auction-ID: A1-49018-215

GAMMA MECCANICA WATER RING PELLETIZER, Model TDA 6, stainlesse steel housing and all parts in contact with water, star blade holder for 4 knives, throughput rate 2,0 Tons/h depending on materials and feeding rate, constructed in 2013, complete with stainless steel drying centrifugeù, screen basket in stainless steel, control panel, photos taken before reconditioning, the machine is offered totally reconditioned with warranty, capacity: 2.000 kg/h

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

Industrial pellet press manufactured by Bühler, model DPUC, designed for the continuous production of pellets from different raw materials. The equipment incorporates a 6 mm die and is prepared for a capacity of approximately 2.5 tons per hour, depending on the product and process conditions. The press is equipped with a roller compression chamber, conditioner for product pre-treatment and support bed. The assembly is complemented by a stainless steel worm conveyor, intended for feeding or evacuating the product in the pelletizing line. Technical characteristics DPUC Model Year of manufacture 2005 Production 2,500 Kg/h In your state

Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: Screen: 6 mm Motor: 2 x 90 kW Inner diameter of die: approx. 660 mm Number of press rollers: 2 Pressing capacity: up to approx. 3–5 t/h Condition: Gebraucht Location: Tauberbischofsheim, Germany

Motor Power 200 kw Dics diameter 6 mm Used for wood pellet production Can be inspected under power

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...

Feeding Technology / Feeding System / Vibratory Conveyor / Sorting Device / Spiral Conveyor Vibrating Cup, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System DEPRAG Type: 0622-P/0,75-1SNr: 1183884 2011 - 2012The system was used for feeding electrical plug contact pins. Product dimensions: 4 mm, length 26 mmThe pins are stored in the material hopper, the feed belt conveys the pins into the spiral conveyor as required.

Loos Feedwater Module FT C 3 / 0.5 bar - 110°C 3000 liters Year of construction 2009 The plant was operated with osomosis water Destresser/cooler for desalination Sludge Sampling incl. cooler 2 pumps Dosing pump for sulfite phosphate

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

Rubberized, encapsulated vibrating channel with 2 outlets and 3 inlets of 200 mm , with 2 unbalance rs of 1.8 kW / 960 UPM. Rinne was used to press up 2 side-by-side Mogensen-Sizern.

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

approx. 70 m³ / 70,000 litres polyester tank, upright standing flat bottomed tank, above ground, with multiple connections and spouts. volume: approx. 70 m³ / 70,000 litres material: polyester / GRP diameter: approx. 3.00 m tank height: approx. 10.00 m overall height: approx. 10.50 m The tank has been newly painted and is in a good condition. The container can be used as a storage tank for liquid feed, whey, molasses, water, slurry, or as rain drip tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offer ...

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

; operational

; operational

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.

Built in: 2004 Equipment: Feeder; working condition

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

Different gutter ca 150st with and without sieve occupy 800x400mm MVC 50-3 1100x300mm MVC 50-3 1100x400mm MVC 50-3 1100x500mm MVE 50-3 1200x400mm MVD 50-4 with and without sieve 1200x800mm MV 100/50 1200x1000mm MA 220 1200x1500mm Vem 8 1250x400mm MVD 50-3.1 Sieve 1300x1200mm MA 220 1400x650mm MVES 50-1P 1400x800mm MV 100/50 1400x1100mm MA 440 1450x900mm MVES 50-1P 1450x1200mm MVFS 50-2P 1500x400mm MVE 50-3 1500x500mm MS 7.21 Sieve 1500x650mm MVE 50-3.1 1500x800mm MVE 50 1600x400mm MVD 50-2 1600x900mm MVES 50-1P 1600x1200mm MA440 1750x400mm MVD 50-2 1800x500mm MVE 33-1 1800x1400mm MV 900-5 1850x500 MVES 50-1p sieve 1900x900mm MVF 33-1 2000x400mm MVF 50-1 2250x400mm MVE 50-3.1 3350x400mm 2x MVD 50-2 3500x2000mm 2x Schenck DF3 7400x950mm DMW 1000v 7500x500mm 2 Jost ruttler 7500x750mm DF3