We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,976 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.
used
Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland
used
M. No.: 409091063 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overl ...
used
M. No.: 402111082 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overl ...
used
Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...
used
Size: 240 x 350 mm Equipments: length 115 cm power consumption 230 V, 50 Hz Height: Variable from 90 - 116 cm max. pass-trought width 24 cm width 50 cm Compatible with all 36 x 52 printing machines, regardless of the feeder system (stream feeder / single sheet feeder) Short set-up time, efficient use from 1000 envelopes serial no 20391212
used
AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134
used
AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35
used
Manufacturer: K-Tron Model: LWF D5-S + K2M - T20 Type : Twin screw feeder / double screw dosing unit Dosing : volumetric gravimetric Filler mounted on weighing platform Product : powders / granules Motor : 0,45 KW - 2000 rpm Speed reduction : Min: 16,1:1 -> 124 rpm Max: 3.22:1 -> 621 rpm Hopper volume: 50 L Hopper mixing: plow + blade 4 oil dampers Capacity: 275 L / h depending on product. Does not include electrical or safety controls. These elements can be quoted separately.
used
Inlet size: 150x600 mm
used
Material feeder (similar to bar feeder), pick-and-place machine, parts elevator for blanks to automatic lathes, machining and milling machines; -230/400 V; -Overall dimensions: approx. 1300 x 1400 x 3400 mm; -Weight: 200 kg.
used
used
used
Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...
used
Description: Order number: 940059 Max. Sheet width: approx. 300 mm With DREHER digital control Approx. Onsite Dimension. (l x w x h): 900 x 1,200 x 1,870 mm, weight approx.: 2,000 kg
used
MIXER, SCREW FEEDER, MILL, #3747
used
Description: Bäuerle SFM-O table milling machine with feed Left and right rotation + HolzHer feed type 1112 + fence Width: approx. 116.5 cm Depth: approx. 114.0 cm Height: approx. 155.0 cm Working height: 88.5 cm Weight: 500 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 1,200 x 1,600 mm, weight approx.: 500 kg
used
Built: 1991, inlet: 400 mm x 400 mm opening, overhauled, without drive.
used
Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.
used
480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately
used
Rubberized, encapsulated vibrating channel with 2 outlets and 3 inlets of 200 mm , with 2 unbalance rs of 1.8 kW / 960 UPM. Rinne was used to press up 2 side-by-side Mogensen-Sizern.
used
Rubber lined, ensulated vibrating chute with 2 outlets and 3 inlets (200 mm Ø each), with 2 imbalance drives (1,8 kW / 960 RPM each). Chute has been used for feeding material in two side by side standing Mogensen sizers.
used
1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.
used
Jar cap inside lid feeder. This has been in use in the cosmetics industry. At the moment the lid size is 40 mm ( 5 mm )
used
Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.
used
Vibrating feeder with integrated screen segment (grizzly segment), working area 800 x 4.000 mm, E-drive by vibration motors 2 x 4 kW
used
Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052
used
Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.
used
Geroldinger feeding station with electric heating and cell feeder.
used
Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.
used
Steel box feeder with steel belt and combined drive unit for belt and windlass. Box dimensions: Ca. 2.000 mm x 750 mm x 500 mm high; incl. hopper on top with the following inlet dimensions: 1.600 mm x 1.200 mm x 360 mm high. Condition: Solid body; motor must be revised, part of belt needs to be greased / made flexible (due to standing time)
used
Solid star feeders with input and output diameter 275 mm, with gear drive 0,25 kW / 35 RPM. Several identical feeders are available (built between 2000 and 2007), in very good condition, partly unused.
used
Entry and pull-out system for scanners; movable units; complete with drives and pneumatics; Holding role is missing; Foerderhoehe 1.550 mm; servo motor for adjustable slides infeed system for scanner of boards; sidevise moveable; incl. motors and pneumatic; hold down roller is missing; transport level 1.550 mm; servodrive for sidevise moving
used
; operational
used
; operational
used
used
used
used
used
used
used
used
approx. 70 m³ / 70,000 litres polyester tank, upright standing flat bottomed tank, above ground, with multiple connections and spouts. volume: approx. 70 m³ / 70,000 litres material: polyester / GRP diameter: approx. 3.00 m tank height: approx. 10.00 m overall height: approx. 10.50 m The tank has been newly painted and is in a good condition. The container can be used as a storage tank for liquid feed, whey, molasses, water, slurry, or as rain drip tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offer ...
used
Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg
used
Size: 1.300 x 4,900 mm, with grizzly, feed size up to 600 mm, approx. 350 t/h, E-drive 22 kW, on base frame, unused
used
+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. feeding device / work-piece-organizer Feldpausch OA 45-L manufacturer: Feldpausch type: OA 45-L manufacturer-series-nr.: 3/L year of construction: 1990 comm.-Nr.: 3990168/079 stock-nr.: 1445 + Regular Price: 2.950,- € > Reduced Price: 1.475,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) filling weight: ca. 100 kg filling volume: ca. 25 dm³ pot outer diameter: ca. 600 mm pot inner diameter: ca. 440 mm drive power: 220 V / 50 Hz power consumption: 550 VA protection class: IP 54 empty weight: ca. 120 kg standing area: W 750 x D 650 x H 950 – 1.250 mm color: greywhite / red Features vibr ...
used
Different gutter ca 150st with and without sieve occupy 800x400mm MVC 50-3 1100x300mm MVC 50-3 1100x400mm MVC 50-3 1100x500mm MVE 50-3 1200x400mm MVD 50-4 with and without sieve 1200x800mm MV 100/50 1200x1000mm MA 220 1200x1500mm Vem 8 1250x400mm MVD 50-3.1 Sieve 1300x1200mm MA 220 1400x650mm MVES 50-1P 1400x800mm MV 100/50 1400x1100mm MA 440 1450x900mm MVES 50-1P 1450x1200mm MVFS 50-2P 1500x400mm MVE 50-3 1500x500mm MS 7.21 Sieve 1500x650mm MVE 50-3.1 1500x800mm MVE 50 1600x400mm MVD 50-2 1600x900mm MVES 50-1P 1600x1200mm MA440 1750x400mm MVD 50-2 1800x500mm MVE 33-1 1800x1400mm MV 900-5 1850x500 MVES 50-1p sieve 1900x900mm MVF 33-1 2000x400mm MVF 50-1 2250x400mm MVE 50-3.1 3350x400mm 2x MVD 50-2 3500x2000mm 2x Schenck DF3 7400x950mm DMW 1000v 7500x500mm 2 Jost ruttler 7500x750mm DF3
new
Technische Daten: -3 Rollen 120 x 60 mm -8 Geschwindigkeiten 3, 5, 7, 10, 12, 16, 25, 32 m/min -Geschwindigkeitswechsel durch umstecken der Zahnräder -Motor 1 PS -rechts / links Lauf -komplett mit Zahnstangenstativ -Gewicht 61 kg
new
Technische Daten: -4 Rollen 120 x 60 mm -8 Geschwindigkeiten 3, 5, 7, 10, 12, 16, 25, 32 m/min -Geschwindigkeitswechsel durch umstecken der Zahnräder -Motor 1 PS -rechts / links Lauf -komplett mit Zahnstangenstativ -Gewicht 65 kg
new
Technische Daten: - 4 Rollen 120 x 60 mm (120 x 25 mm ) - stufenlose Geschwindigkeitsregulierung über Servomotor vom 2 - 22 m/min - Motor 0,5 PS - Spannung 400 V / 50 Hz - rechts / links Lauf - komplett mit Zahnstangenstativ - Transportabmessung: Vorschub 685 x 326 x 316 mm, Stativ 770 x 32 x 290 mm - Gewicht 60 kg