farrel pomini used for sale

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.

Farrel Pomini Mixer Type OOC A2 Velocita mixer Steam / water gauges Leeds temperature recorder ISF cabinet

Key data: 80 liter

Qty 1 x Farrel Pomini model F80 banbury mixer, Serial number: 82/92, Original year 1981, but overhauled in 2011, Standard 2 wing rotors, FYH dust seals, Pneumatic hopper, Hydraulic drop door, Unidrive gearbox, 250HP fixed speed AC motor and starter, Rotor speed 35rpm, Upgraded operator controls (new in 2011). Complete with hydraulic unit and lubrication system. In good working condition.

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...

Qty 1 x Pomini Model P270 Banbury internal mixer, M/c no. 362, Year: 1996, HDM style rotors (2 wing equivalent), PYH Dust stops, Hydraulic drop door discharge with Linear actuator, Vickers hydraulic power pack, Unidrive gearbox with couplings (11D type, 1000HP rating). Pneumatic hopper. Without motor or controls. Can be supplied with or without gearbox. Quote for new motor and controls on request.

1 x Refurbished Pomini Farrel model P160 Banbury internal mixer, Original year of manufacture 1984, Rebuilt in 2017 (not used since), Mixing chamber volume 160L Net, Batch size at 75%FF and SG 1.0 - 120kg, 2 wing rotors, PYH hydraulic dust stops (new), hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, Unidrive gearbox type NF160, rating 640HP, Input speed 1500 rpm, output 39.6rpm. with 470kW, 500V DC variable speed motor. Mechanically complete but currently without electrical controls.

chamber volume: 80 liter useable volume: -- liter friction: -- motor drive power: 390 kW Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year The data for this ad was created with ModulMWS - the software solution  ...

Refer to code 1009 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 370 liter

PN-370l Mixer available Pneum. Hopper Gear Box 2 x 1050kW DC Motor with Inverter Feeding scale Oil scale Description attached!

Key data: 215 mm, 304

Pomini 12” x 8.5” Dump Extruder Type 12/8.5 Year of Manufacturing: 1993 Conical screw 300mm 215mm diam. Pneumatic crammer feed with DC variable speed motor Pelletizing head Without controls

Refer to code 1012 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1052 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

POMINI-FARREL / POMINI Laboratory Tangential Mixer PL1,6 Refer to code 1144-1014 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.

Farrel Bridge BR Mixer (Lab BR Internal Mixer) Capacity of chamber 1.6 litre RPM 1420/960 730/350 HP 25/17/12.5/8.5 Motor 380 / 420 volts With Gearbox Cooling water / steam Complete with Control Panel

1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

1 x Farrel F370 mixer chamber and hopper M/c no. 081110, Date: November 2009, SSA dust stops, 4 Wing Rotors, Drop door with Linear actuator, Base Plate with Toggle Latch. Pneumatic hopper with extension neck (Floating weight looks to be in good condition). Parts available: Body, baseplate, Toggle Latch, actuator and Pneumatic hopper with extension neck.

Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8   1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet

Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block

Refer to code 1011 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

grinding diameter: 1524 mm grinding length: 4400 mm swing diameter: 1524 mm max. workpiece weight between centres: - kg grinding wheel dia. x width: - mm Control: FANUC 18i-TB chucking diameter: - mm spindle motor: 37,2 kW workpiece drive: 29,8 kW spindle speeds (infinitely variable): 450 - 1250 U/min work piece spindle speed: 7 - 42 U/min grinding slide stroke: 4900 mm total power requirement: ca 90 kW weight of the machine ca.: - t dimensions of the machine ca.: 12,5 x 3,6 x 2,8 m - FANUC 18i-TB CNC control - Coolant system & belt filter with separator - Spindle oil cooling - Motor-driven counterholder - 2 steady rests - Splash guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Travelling wheel machine with CROWNING and CONCAVING grinding - Equipped with stones / flanches / lubrication / coolant system    - Maximum diameter full size wheel 1550 mm - Work swing over bed 1580 mm - Work load 180.000 pounds (81.000 Kg) - Grinding length 7500 mm

Refer to code 1018 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

faceplate diameter: 6300 mm swing diameter: 7000 mm turning height: mm ram adjustment: mm cross rail adjustment - vertical: mm ram head - cross travel: mm ram swivable +/-: ° main drive: kW table revolutions:: 0 - 14 U/mn workpiece weight: 75 /125 t ram head dimension: mm total power requirement: 170 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 10 x 10 x 7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamber volume: - liter useable volume: 1,6 liter friction: - motor drive power: 18,5 kW Condition: used - refurbished Specification: laboratory internal mixer - used - Chamber volume: approx. 1.6 l - Closing system: front door with pneumatic piston - Piston: pneumatic - Rotor geometry: tangential type - Oil-free self-lubricating sealing rings - New rotary union for water cooling - New main gearbox - New AC motor: 18.5 kW - Control cabinet: NEW, with Siemens S7-1200 PLC - Control panel with Siemens KTP 700 Basic touch panel - Cabling: NEW - New Siemens G120 frequency converter for variable speed - New remote maintenance device - Paint finish: according to customer specifications - With safety devices in accordance with applicable standards - Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in English or German The data ...

Key data: 762 mm

4 Qty.1 Second-hand roll grinding machine GRINDER241001-3 Mfc.: Farrell, Type: 409, min. roll dia.: 0 mm, max. roll dia.: 762 mm, table length: 2,514 mm, weight: 15 Tonnes

Refer to code 1131 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1178 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: - Concave grinding possible - Covex grinding possible - NUM 760 CNC Control - Fixed steady rest 2 x  - Stones and Flanches included

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Qty 1 x HF/Pomini VIC95X (IM110VIC), Hydraulic hopper (IM90-E type), Refurbished complete chamber and hopper installed new in August 2016, Machine number: 487, year of rebuilding 2014, CE marked, Chamber volume approx: 104Litre, Useful volume at 0.75FF: 78Litre, Batch weight at SG 1.15: 90kg, Hydraulic dust seals (PYH Type), Hydraulic drop door with linear actuator and toggle latch, Rotor geometry adjusted by 2 x 2.2kw, 1420rpm motors, Unidrive gearbox, Ratio 20.6:1, With Ansaldo 352KW, 1030/1230rpm, 875Amp, 440V water cooled DC variable speed motor. Siemens S7 PLC control system (cpu 315-2DP, step 7). Complete and in very good working condition. All manuals and documentation available. Used spare chamber parts available/included:- Qty 1 set (2pc) used rotors Qty 2 sets (4pc) used drilled sides Qty 2pc used door tops Qty 1pc used weight The mixer has now been r ...

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Refer to code 1174 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1185 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1010 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1017 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.