We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,436 used machines on RESALE, but how to find them? Machine Search
1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.
used
1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.
used
FARREL BRIDGE 4-ROLL, INCLINED 'Z' CALENDER. 66 inch roll face width, 28 inch diameter. Rolls are current polished to produce matt PVC finish. Independent variable speed DC drive to each roll via solid state, AC to DC converter. Cross axis control on roll 4 (roll 3 fixed). Extensively modified and up-graded controls and drives.
used
Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8 1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet
used
Farrel Bridge BR Mixer (Lab BR Internal Mixer) Capacity of chamber 1.6 litre RPM 1420/960 730/350 HP 25/17/12.5/8.5 Motor 380 / 420 volts With Gearbox Cooling water / steam Complete with Control Panel
used
Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts
used
Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox
used
Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.
used
Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.
1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).
used
1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).
1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.
1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.
used
1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.
used
1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.
used
1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.
used
1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.
used
Qty 1 x Pomini Model P270 Banbury internal mixer, M/c no. 362, Year: 1996, HDM style rotors (2 wing equivalent), PYH Dust stops, Hydraulic drop door discharge with Linear actuator, Vickers hydraulic power pack, Unidrive gearbox with couplings (11D type, 1000HP rating). Pneumatic hopper. Without motor or controls. Can be supplied with or without gearbox. Quote for new motor and controls on request.
used
1 x Farrel F370 mixer chamber and hopper M/c no. 081110, Date: November 2009, SSA dust stops, 4 Wing Rotors, Drop door with Linear actuator, Base Plate with Toggle Latch. Pneumatic hopper with extension neck (Floating weight looks to be in good condition). Parts available: Body, baseplate, Toggle Latch, actuator and Pneumatic hopper with extension neck.
used
1 x Refurbished Pomini Farrel model P160 Banbury internal mixer, Original year of manufacture 1984, Rebuilt in 2017 (not used since), Mixing chamber volume 160L Net, Batch size at 75%FF and SG 1.0 - 120kg, 2 wing rotors, PYH hydraulic dust stops (new), hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, Unidrive gearbox type NF160, rating 640HP, Input speed 1500 rpm, output 39.6rpm. with 470kW, 500V DC variable speed motor. Mechanically complete but currently without electrical controls.
used
QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...
used
Farrel Twin Screw Extruder EXTRUDER Type: TSS-12 Year 2009 With double screw for processing rubber Extruder screw speed (Max.): 15.2 RPM Motor 175kW, 1485 rpm Without Control Panel
Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers
used
Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!
used
chamber volume: 80 liter useable volume: -- liter friction: -- motor drive power: 390 kW Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year The data for this ad was created with ModulMWS - the software solution ...
used
Farrel Rollgrinder 2 Technical Details Machine Type: Farrel K850 60x240IN Year of manufacture: 1964 Year of modernization: 2008 Year of Arrival at Plant: 2009 Dimensions Distance between Centers: 240" - 6096 mm Max. Working Diameter with New Stone: 58" - 1473.20 mm Max. Allowable Workpiece Weight: 80 Tons Abrasive Wheels Dimensions: 36 "x 4 "x 20" - 914.4 x 101.6 x 508 mm Min. Working Diameter: 482.6 mm Max. working diameter: 927.10 mm (927.10 in.) Stone Speeds: 50 - 1200 rpm Surface Speed: 30.3 - 58,2 m/s Drive Head Spindle Speed: 0 - 100 rpm Longitudinal Slide Movement Feed rate: 1 - 5900 mm/min Cooling Devices Emulsion capacity in the tank: 1500 lt CNC Control HCC/KP10
used
Farrel Pomini Mixer Type OOC A2 Velocita mixer Steam / water gauges Leeds temperature recorder ISF cabinet
used
Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block
used
Single screw extruder - Screw diameter: 80 mm - Length: 90cm - With pre-mixing chamber heated with diathermic oil - Head cut - Loading hopper - Complete with electrical panel
used
chamber volume: - liter useable volume: 1,6 liter friction: - motor drive power: 22 kW Condition: used - overhauled Specification: Laboratory internal mixer - second-hand - chamber volume: approx. 1.6 l - closing system: front door with pneumatic piston - plunger: pneumatic - rotor geometry: tangential type - Oil-free self-lubricating sealing rings - New rotary union for water cooling - New main gearbox - New AC motor: 22 kW - Control cabinet: NEW - Control panel with OP 7: NEW - Wiring: NEW - New frequency converter for variable speed - Paintwork: according to customer specifications - With safety devices according to current standard - overhauled, with warranty 12 months, with CE-marking, Operating and maintenance instructions in English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6
used
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6 table cushion: yes 6 stations plus auxiliary station Used for eyelet production - tooling still mounted
used
Refer to code 1009 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1011 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1012 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1018 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1014 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1044 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1045 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1052 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1057 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW
used
A cylinder grinding machine that our company started overhauling a few years ago. The object of the revision was the restoration of the mechanical part and the reconstruction of the entire electrical system. However, the foreign customer, in the meantime and during construction, declares bankruptcy and the machine tool remains in RMP. After a few years through a legal procedure, the initially established temporary importation is transformed into a definitive importation by RMP. Currently the machine can be viewed at our factory. The sale price will vary according to the Customers needs, therefore the indicated cost is to be considered starting. It should be noted that the electrical system needs to be completely redone, while a part of the mechanical part has been restored. Attached is the technical sheet, some photos that represent the machine before our intervention and ot ...
used
PRESS DESIGN drive system: eccentric / crank number of slide actions: 10 SLIDE stroke rate (max.): 110 /min 10 stations + 1 auxiliary 5 ton per station Distance between stations: 54 mm (2-1/8") STROKE OF CAMS (STANDARD) #1 25-35 mm (1- 1-3/8") #2 to #10 25-41 mm, (1 - 1-5/8") Speed: 110 SPM
used
Single-Girder Bridge Crane, Bridge Crane, Overhead Crane with Track, Bridge Crane with Electric Chain Hoist, Portal Crane; Used Machine Manufacturer: S+V 98 Ltd Type: DP-013-3200-400-800 Year: 2013/05 Last Inspection: 2023.03 Capacity: 3.2 tons Bridge Crane with Electric Chain Hoist: Width: 4000 mm Span: 3800 mm Weight: 1950 Kg Capacity: 3200 Kg Lifting Height: 2900 mm Trolley: Yale With Wired Remote Control Electric Travel and Lifting Crane Track: Length: 8220 mm Width: 4000 mm Height: 3800 mm Profile: HEA 220 Lifting Height: 2900 mm Span: 3800 mm
used
Axes travel X-1020 Y-610 X-560 SK40 spindle 8000 rpm Magazine for 20 tools Control Siemens Sinumerik 810d Communication with the PC via the RS port, we have a new postprocessor for the machine written by GM System The center is operational and is in constant use
used
4 piece bridge band 280 mm Stainless steel, new
new
Conventional or NC – controlled bridge sawing machines for the processing of slab material made of marble, granite, ceramics and other hard materials by sawing and milling (edge and contour milling) – brand new. The cutting bridge is driven electronically. The feed speed is infinitely adjustable via potentiometers, the position of the sawing unit is indicated by an electronic digital display. Travel range of the X-axis (longitudinal direction) 3,500 mm Travel range of the Y-axis (cross direction) 1,650 mm Traversing range of the Z axis (vertical) 140 mm Manual saw blade rotation 0 to 90 degrees horizontal Saw blade inclination 0 to 90 degrees vertically adjustable via handwheel and digital display Saw blade diameter / bore - 450/40 mm Saw blade drive power 5.5 kW - 1,400 rpm Maximum cutting thickness (maximum material height) 140 mm Working height approx. 700 mm Hourl ...
used
Manufacturer: Stahl Strength: 10 tons / crane Assemblied the two system is 20 tons strength with hook Can be sold separately, price is 2.800 EUR / pcs
used
weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: 3220 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.