We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,919 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm -Dimensions: 465/325/H230 mm -Weight: 11 kg
used
High pressure radial fan, dust extractor fan, exhaust gas extractor, welding fume extractor, extractor fan, pressure fan, vacuum fan -Motor power: 0.12 KW -Speed: 2780 rpm -Volume output: 252 m³/h -Pressure increase: 240 PA -Connection input: Ø 142 mm -Connection output: 56 x 52 mm -Number: 1x fan available -Price: per piece -Dimensions: 270/180/H160 mm -Weight: 4.8 kg
used
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg
used
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.56 kW -Volume output: approx. 45 m³/min -Connection air duct: 285 x 150 mm -Number: 2x fan available -Price: per piece -Dimensions: 380/380/H330 mm -Weight: 15 kg
used
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2800 rpm -Volume output: 35 m³/min -Pressure increase: 95 mm water column -Connection input: 200 mm -Connection output: 105 x 120 mm -Number: 1x fan available -Price: per piece -Dimensions: 340/390/H470 mm -Weight: 18 kg
used
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 0.7 kW -Speed: 2750 rpm -Volume output: 20 m³/min -Pressure increase: 110 kPA -Connection input: 150 mm -Connection output: 110 x 110 mm -Number: 1x fan available -Price: per piece -Dimensions: 285/290/H360 mm -Weight: 10 kg
used
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.5 kW -Speed: 2820 rpm -Volume output: 45 m³/min -Pressure increase: kPA -Connection input: 250 mm -Connection output: 170 x 150 mm -Number: 1x fan available -Dimensions: 420/395/H540 mm -Weight: 24 kg
used
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 0.45 kW -Speed: 2800 rpm -Volume output: 22 m³/min -Pressure increase: kPA -Connection input: 140 mm -Connection output: 110 x 110 mm -Number: 1x fan available -Price: per piece -Dimensions: 300/290/H360 mm -Weight: 12 kg
used
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 2.2 kW -Speed: 2820 rpm -Volume output: 48 m³/min -Pressure increase: kPA -Connection input: 180 mm -Connection output: 155 x 155 mm -Number: 2x fan available -Price: per piece -Dimensions: 440/380/H420 mm -Weight: 31 kg
used
Fan filter, fan line, air cooler, control cabinet fan, filter fan -Manufacturer ebm Santenberg: Filter fan from CNC machining center Santenberg GTC S 2 -Engine: Type ebm W2G130-AA33-26 -Voltage: 24V/14/16W -Dimensions: 255/255/H115 mm -Weight: 1.4 kg
used
Centrifugal fan, centrifugal fan, centrifugal fan SIEMENS SIMODRIVE 6SN1162-0BA02-0AA2 with SHIELD CONNECTION PLATE 6SN 1162-0EA00-0KA0 Fan: EBM D2D133-AB06-30 Fan wheel: Ø 120 mm n: 2500 rpm Motor : 0,,12 kW 360 - 480 V 3AC 2x Ø 115 mm Output: 210 x 65 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 800 x 720 x 670 mm
used
Manufacturer: Höcker Unterdruckfilteranlage, Control: Siemens, Year: 2008, Filter system - negative pressure: yes, Volume flow rate m³/h: ca.60000, Filter surface in m²: 454,3, Number of filter filter gallerys: 4, Return air capable: yes, Cleaning of scavenging air: yes, Star feeder: yes, Electronic control board: 1, Fans frequency-controlled: 4, 1st transport fan - bunker kW: 7,5, 2nd Exhaust fan kW: 30, Suction pipe diameter 2 mm: 800, 3rd Exhaust fan kW: 22, Suction pipe diameter 3 mm: 450, 4th Exhaust fan kW: 22, 5th extractor fan kW: 22, Exhaust switch: yes, Total power kW: ca 105, Year :2008
used
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 11 kW -Density: 1.2 kg/m³ -Volume output: 84 m³/min -Pressure increase: 3800 Pa -Connection input: Ø 275 mm -Connection output: Ø 270 x 130 mm -Dimensions: 1000/800/H700 mm -Weight: 252 kg
used
Fan filter, fan assembly, air cooler, switch cabinet fan, filter fan -Rittal: Filter fan SK 3241.100 -Filter: 230 V/40 W -Price: per piece -Number: 11 pieces -Dimensions: 255/255/H120 mm -Weight: 1.7 kg/piece
used
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.175 kW -Speed: 1310 rpm -Volume output: unknown -Connection air duct: 130 x 135 mm -Dimensions: 340/290/H130 mm -Weight: 6 kg
used
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.95 kW -Volume flow: 0- 3210 m³/h -Connection air duct: 290 x 150 mm -Number: 5x fans available -Price: per piece -Dimensions: 300/390/H390 mm -Weight: 19.5 kg
used
System Components: Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...
used
Centrifugal fan NICOTRA - Gebhard type SEM 18-0500-4W-16-C RD/0 Fabr. No. 142-943705-458068/1 Year of construction 2012 Volume flow max. 10825 m³/h = 180m³/min. Density 1.2 kg/m³ Air inlet 500 mm, air outlet 640 x 320 mm , engine speed 1440 rpm. Motor power 2.2 kW Mains connection 400 Volt 50 Hz - Fan impeller with 12 fan blades - Direct flanged drive motor - Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air inlet from 500 to 600 x 305 mm Rectangular flange - Galvanized sheet metal housing Space requirement L x W x H 950 x 750 x 890 mm Space requirement with pallet L x W x H 1270 x 990 x 1500 mm Weight centrifugal fan 110 kg Weight with pallet 135 kg very good condition; used
used
Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0 Fabr. No. 318844/626052/1 Year of construction 2008 Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³ Air inlet 500 mm, air outlet 450 x 450 mm , engine speed 1435 rpm. Motor power 4 kW mains connection 400 volts 50 Hz - fan impeller with 8 fan blades - directly flanged drive motor - mounted adapter ring with flex sleeve 500 mm- adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- galvanized sheet metal housing height without adapter ring 1100 mm space requirement L x W x H 1100 x 1000 x 1630 mm Space requirement with pallet L x W x H 1400 x 1070 x 1800 mm Weight centrifugal fan 200 kg Weight with pallet 230 kg very good condition; used
used
Extraction and filter system Nestro 9/4/20 with chip container YOC ca. 2005 Filter area 156 m² Hoses 2 m long, 108 pieces, diameter 220 mm Total air volume approx. 20,000 m³/h Suction fans 1. Fan 16 kW 350 mm approx. 9,000 m3/h 2. Fan 11 kW 350 mm approx. 6,000 m3/h 3. Fan 7.5 kW 250 mm approx. 4,000 m3/h Return air duct with summer/winter flaps Cleaning electromechanically 3 motors each 0.66 kW Rotary valve 0.37 kW 3860 mm Transport fan to container 4 kW Control of the system with electrical plans External dimensions approx. L x W x H 4000 x 24200 x 5000 mm Weight 6,000 kg Container for chips L x W x H 4500 x 1900 x 2100 mm Weight approx. 2,000 kg The extraction system is still in operation and will be replaced by a larger system in January 2024 The facility is fully operational and will be available at the end of January 2024 The system can be disassembled i ...
used
Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Centrifugal fan, chip extraction fan, fan, suction, chip fan -Drive: 0.37 kW -Connection: Ø 100 mm -Connection: 380V -Dimensions: 400/600/H1200 mm -Weight: 28kg
used
Manufacturer: R & R Filteranlage, Type: RRFHS-650-JET, Year: 2009, Filter system - negative pressure: yes, Volume flow rate m³/h: 78.000, Filter surface in m²: 651,44, Qty. filter hoses: 324, Hose diameter in mm!: 160, Length of filter tubes: 4.000, Number of filter filter gallerys: 4, Return air capable: yes, Cleaning of scavenging air: yes, Star feeder: RTZ 100, Screw conveyor: yes, Number of fans: 5, 1st transport fan - bunker kW: 7,5, 2nd Exhaust fan kW: 37, 3rd Exhaust fan kW: 37, Suction pipe diameter 3 mm: 37, 5th extractor fan kW: 37, Container connection: möglich, FREE TEXT: Aufstellmass 4400 X 4400 mm + Ventilatoren Einhausung 4000 X 4000 mm, Year :2009
new
2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...
new
2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...
used
Manufacturer: Moldow, Type: SA, Control: yes, Year: 1992, Volume flow rate m³/h: ca. 75.000, Filter surface in m²: 690, Qty. filter hoses: 400, Hose diameter in mm!: 220, Length of filter tubes: 2500, Number of filter filter gallerys: 11, Number of fans: 4, 2nd Exhaust fan kW: 22, 3rd Exhaust fan kW: 37, 4th Exhaust fan kW: 15, 5th extractor fan kW: 22, Year :1992
used
Filter system Schuko with discharge chain with rotary valve 36000 m³/h Fan Ø450 – 22 kW Fan Ø400 – 18.5 kW Fan Ø355 – 22 kW Fan Ø350 – 11 kW Electrical control cabinet Completely overhauled dismantled and loaded
used
Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Centrifugal fan, chip extraction fan, fan, suction, chip fan -unfortunately no funding data available -Motor: MEZ type 4AP80-2 -Motor power: 1.1 kW -Speed: 2840 rpm -Connection input: Ø 60 mm -Outlet connection: Ø 400 mm -Base: on castors -Dimensions: 940/540/H1510 mm -Weight: 74kg
used
Fan, fan, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type A2E250-AE65-17 -Voltage: 230 V 115 W -Speed: 2550 rpm -Dimensions: 258/147/H313 mm -Weight: 3.7 kg
used
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: painting wall, painting booth -Motor: Ex protected -Motor power: 3.6 kW -Speed: 1440 rpm -Connection input: O mm -Connection output: 450 mm -Dimensions: 1260/1100 / H815 mm -Weight: 188 kg
used
Key data: 15 m²
Extraction system Nestro Type NSF Filter area 15 m² Capacity 1,644 m³/h Fan motor power 5.5 kW Fan with steel blades 15 filters 3 chip bags Filter bag diameter 230 mm Filter bag length 1380 mm Chip bag diameter 500 m Fan intake diameter 300 mm Dimensions set-up 2600 mm x 800 mm x H approx. 3000 mm Transport Dimensions 1800 mm x 900 mm x H 2000 mm + Fan on pallet 1200 mm x 800 mm x H 1000 mm
used
Max. basket weight:200 kg No. of washing chambers:1 No. Of tanks for washing:1 Small parts - cleaning system BOUS "CeBeCo" SECURUS "D" size 2 "S" from workshop, hardly any operating hours, 1A-TOP-CONDITION Usable dimensions: approx. 800 mm diameter Useful height: approx. 450 mm Operating weight: max. 200 kg with evenly distributed load Nozzles: flat jet Pump: approx. 3 kW 2x heating: approx. 2x 6 kW Thermostat: digital Insulation: Terodem heat insulation Detergent filling capacity: approx. 200 l Power requirement for fan: approx. 0.25 kW Power requirement for drive: approx. 0.12 kW Power requirement for emptying pump: approx. 0.6 kW Voltage: 230/400 V, 50 Hz PE/N Control voltage: 24 V Loading height: approx. 900 mm Labelling: German 1. VAPOUR EXTRACTION The unit is equipped with a vapour extractor, consisting of an electric low-pressure fan with intake connection. The scope of delivery ...
used
Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Toshiba cassette climator RAV SM804UT-E incl. outdoor unit RAV SM803AT-E; Consisting of: 1 x Toshiba 4-way cassette transformer RAV SM804UT-E 1 x outdoor unit RAV SM803AT-E 1 x Standard Remote Toschiba RBC-AMT32E inverter compressorheating function room size large 50m2 max 115m3 The new 4-way cassette is A newly developed turbo axial fan allows the geraete to work very quietly While the improved design of the ceiling panels guarantees a perfect air distribution with very low temperature differences. Main ceiling panels with direct or wide semite-emitting airflow Individual multi-lame control function Auto diagnostic system Very low size height of only 256 and 319 mm Fresh air supply with external fan possible unit: RAV-SM804UT E Cooling power (power range) kW 6.70 (1.50-7.40) Power consumption kW 2.09 EER W/W 3.21 SEER 5.6 3heating power (power range) kW 8.00 (1.50-9.00) Heat power ...
used
Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...
used
Description Brand GUNTNER Model GHF 050/1E/17 ID 109454-16 Status Active Price 1.600 € + VAT Year of manufacture 2011 Location Oradea (RO) Cooling equipment | GUNTNER GHF 050/1E/17 manufactured in 2011. Size (L x W x H): 1000 x 500 x 500 mm. 2 pieces available, one missing a fan. Heat Exchanger Aligned or staggered tube pattern Special copper tubes for HFC, coolant and CO2 Stainless steel tubes for NH3 Surface-corrugated aluminium fins for high heat transfer Casing Corrosion-resistant aluminium alloy AlMg up to 500 mm fan diameter Powder-coated with RAL 9003 Hinged side cover with hinges Tray Hinged and thermally-decoupled (condensation free) Separate drip plate Corrosion-resistant aluminium alloy AlMg Powder-coated with RAL 9003 Large condensation drain with 45° incline Fans Proven quality fans Standard with two speeds (for fan diameter of 50 ...
new
CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...
used
Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new ...
used
Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...
used
PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...
used
IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023
used
ITAL Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6.37 bar Test pressure – 8 bar Manufacturer – ITAL-RUBBER Insurance certificate –(last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1990 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023
used
Fan, fan, electric motor, blower -Speed: 1425 rpm -Fan diameter: 500 mm -Dimensions: 680/680/H300 mm -Weight: 32 kg
used
Fan, fan, electric motor, blower -Speed: 1300 rpm -Fan diameter: mm -Dimensions: 82/82/H86 mm -Weight: 1.3 kg
used
With warranty 12 months, immediately available - T max 150°C, increase to 250°C possible on request - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1864 x D 1560 x H 2440 mm - Capacity 1500 liters - Inlet rails, for feeding the furnace with a loading rack - JUMO DICONtouch (10 programs with Ethernet interface) - Weekly timer - with exhaust fan 360 m³ / h - Door limit switch - Recirculating air fan, switch-off when the door is open, with time monitoring and fan overrun - Temperature limiter - Horn incl. light - Heating capacity 17.4 KW - Weight: 760 kg - Documentation, CE declaration, e-plan We are happy to offer installation and commissioning. We stock new and used industrial furnaces. Get in touch with us! Viewing in our warehouse by appointment.
used
Offer We offer Granulate conveyor vacuum conveyor digicolor 800W verm. F 30 composed of: Suction fan with container / buffer & filling strand monitoring digicolor 800W This is used for suction of the granulate, intermediate storage and controlled delivery to the injection molding machine or the drying container. to the granulate conveyor Digicolor single-phase conveyor vacuum conveyor verm. Q30 Suction fan Manufacturer: digicolor Bielefeld Type: to F30 Power: 0.8 kW Connection: 230V~50Hz Dimensions: approx. D=20 H 20cm Stainless steel Compressed air connection: 5-16 bar Weight: ca.11,6 kg/piece Intermediate tank with level measurement Dimensions: approx. D 20x H 27cm Level monitoring with flap control via magnet on the outside Stainless steel Weight: 5kg estimated with clamping rings for connection The device is currently in a warehouse in Saxony-Anh ...
new
dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner ...
used
Manafacture: Lu-Ve Type: HCE 58 (LH) CU/AL Dimensions: 2350 x 1130 x 835 mm Fan diameter: 700 mm Fan power: 470 W Fan voltage: 230 V Coolant quantity: 18.88 dm³ Maximum pressure: 3 MPa
used
HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...
used
Manufacturer: Lu-Ve Type: HCE 58 (LH) CU/AL Overall dimensions: 2350 x 1130 x 835 mm Fan diameter: 700 mm Fan electric power: 470 W Fan voltage: 230 V Refrigerant Type: R134A - R404A- R22 Refrigerant volume: 18.88 dm^3 Maximum pressure: 3 MPa
used
Servo motor with forced fan SIEMENS 1PH7167-2HB03-0BJ0 13,0 / 16,0 kW 400 / 500 rpm 294 / 350 V 3AC 14,3 / 17,7 Hz IP 55 / 54 Shaft: Ø 55 mm Flange: 320 x 320 mm forced fan: EBM W2D250-ED26-08 0,135 kW 2580 rpm 400 V 3AC case Third-party fan is slightly damaged ! used, tested ! Dimensions: 850 x 320 x 330 mm