We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,248 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Fan filter, fan assembly, air cooler, switch cabinet fan, filter fan -Fandis fan: FPF12KRGF-S00 -Filter: 24 V DC 18.2 W. -Dimensions: 150/150/H75 mm -Weight: 0.5 kg
used
Fan filter, fan assembly, air cooler -2x fans: per line -Fan papst type: Multifan 4318/2 -Number: 7x fan rows available -Price: per piece -Weight: 0.75 kg
used
used
condor 2 fan dry cooler
used
used
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Fanuc LR Mate 100i High Speed Robot with Control It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery is the control unit Mate RJ-2 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120° J5 ±200° (Changes and e ...
used
Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Since the article is available several times, the year of construction may differ. Robot Specifications Axes: 5 Payload: 3kg H-range: 620 mm Repeatability: ±0.04 mm Robot mass: 32kg Structure: Articulates Assembly: Floor, inverted Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 ...
used
Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120 ...
used
Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price
used
Thyristor-controlled, pneumatic point welding pliers with timer and compensation device 6kVA water-cooled
used
We provide the following to the purchase : manufacturer Fanuc suitable for model series P-200 Shipping costs on demand with us:; Second Hand
used
Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good
used
1 x Fanuc Back Plane 3 Slot A05B-2316-C105 1 x Fanuc A16B-3200-0042/05B900514 Board 1 x Fanuc A16B-1 212-0871/17C906140 Power Supply Board Alternative search terms A05B2316C105 A16B3200004205B900514 A16B1212087117C906140 A16B-3200-0042 A16B-1212-0871 A16B12120871.br/> .br>.br/>>A16B32000042.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>
used
Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
Welding robot FANUC R-2000iA/165F Built: 2001 Control: CNC R-J3iB 6-axis Max arm area: 2 650 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head
used
Welding robot FANUC S-430iW Built: 2000 Control: CNC R-J3 6-axis Max arm area: 2 643 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head
used
Two little used Fanuc robots with tools and R-J2 controller. Working condition disabled from use. We can check hour counters. For example spareparts or use.
used
Torque: 12 Nm volt: 144 V ampere: 11 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Torque: 23 Nm volt: 146 V ampere: 20 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
power capacity: 29 kW volt: 129 V ampere: 29 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
power capacity: 23 kW volt: 127 V ampere: 33 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
ampere: 20 A volt: 146 V Torque: 23 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Torque: 12 Nm volt: 144 V ampere: 11 A power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
number of controlled axis: 6 workpiece weight: . kg throat: . mm Control: System R-J Number of working hours: 38217 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm
used
FANUC M6IB 6S (year 2006) Available: (1) M16IB + FANUC SYSTEM R J3IB Controller + console (1) M16IB + FANUC SYSTEM R J3IB Controller The FANUC M-6iB/6S is a short arm for tight, confined spaces. The robotic arm of the M6iB/6S RJ3iC is used to treat products where parts sizes and envelopes are of little concern. The M 6iB/6S can perform acute, lightweight material handling with a repeatability of +/- 0.08 mm and a maximum payload capacity of 6 kilograms. Robot Specifications Axes: 6 Reach: 900mm Repeatability: ±0.08mm Robot Motion Speed J1 - 200 °/s (3,49 rad/s) J2 - 200 °/s (3,49 rad/s) J3 - 260 °/s (4,54 rad/s) J4 - 400 °/s (6,98 rad/s) J5 - 400 °/s (6,98 rad/s) J6 - 720 °/s (12,57 rad/s) Robot Motion Range J1 ±170° J2 ±125° J3 ±155° J4 ±190° J5 ±140° J6 ±360°
used
FANUC S-420iW industrial robot was manufactured in Japan in 1996. A handling robot characterised by maximum performance and reliability has many applications in the industrial sector. The arm with a long reach of 2850 mm and a load capacity of 155 kg, together with 6 axes equipped with mechanical brakes, will meet even the most demanding challenges. The S-420i W robot has an integrated FANUC R-J2 controller, which uses advanced technology to improve and optimise overall productivity. The total weight of the machine is 1600 kg. Technical specifications of the FANUC S-420iW articulated robot - integrated controller: FANUC R-J2 - number of axes: 6 - arm reach: 2850 mm - payload: 155 kg - portable teach pendant: FANUC - motion range of robot axes J1 axis: 360° J2 axis: 142° J3 axis: 135° J4 axis: 600° J5 axis: 260° J6 axis: 720° - movement speed of robot axes J1 axis: ...
used
Workpiece weight: 0 kg Number controlled axis: 0 Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 1 MACH-id 5482 MAKE FANUC + ROFIN TYPE S- 420 iF & SM 2000
used
power capacity: max 22 kW volt: V ampere: A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
power capacity: max 22 kW volt: V ampere: A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Robot Robot FANUC typ S 430 IL // Cena 5.000 Euro
used
Machine Details Warehouse number 1105-03578 Machine Type Machining Center - Vertical StAMA ROBODRILL brand Type MC 010 Year of construction 1990 Control type CNC Storage location HAGUENAU Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock Technical details x-travel 500 mm y-travel 380 mm z-travel 300 mm Spindle holder ISO 30 sk sa Clamping surface 650 x 380 mm Tool magazine with 10 seats Tool change time 5 sec workpiece weight 200 kg Speeds - autom. switchable 60 - 8000 rpm Feed speed 1 - 4095 mm/min Feed force 400 kp (X, Y) Feed force 1000 kp (Z) Rapid traverse speed 36 m/min (X, Y) Rapid traverse speed 30 m/min (Z) Information Equipped with/ Equipped with: - FANUC 0 M Control - 10-fold tool changer SK 30 - Coolant system / cooling attachment - 4 T-slots / 4 T-slots TOOLS SK 30
used
used
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Shaft: Ø 48 mm -Height shaft axis: 157 mm -Construction: B3 -Dimensions: 615/320/H330 mm -Weight: 128 kg
used
Vertical machining center Fanuc Robodrill Alpha T21i EL Year 2007 CNC Fanuc 31i Tool holder BT 30 Spindle power 5.5 Kw Spindle RPM 24000 HSC (high speed) yes Number of tools 21 X 700 mm Y 400 mm Z 330 mm Rapids X Y Z 54 m / min Table dimensions 850 x 410 mm Fourth axis Kitagawa MOD. MR200 Flange diameter 200 mm Continuous rotation, 360000 positions Renishaw TS27R presetting DIMENSIONS AND WEIGHT Length 2115 mm Width 2027 mm Height 2336 mm Weight 2100 Kg Under power in our warehouse - test possible Mimu Machine Tools (Italy) Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, Spindle speed RPM: 24000
used
Vertical machining center FANUC Robodrill Alpha T21iC 2002 ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same workpiece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc
used
Vertical machining center FANUC Robodrill Alpha T14iA ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc
used
Fanuc Robodrill a-T14 iB Vertical Machining Center Machine is in excellent condition
used
Robodrill MC 010 X-axis: 500 mm Y-axis: 380 mm Z-axis: 300 mm Admission in spindle (ISO): BT30 Control : Fanuc 16-M Toolchanger: yes Number of toolholders: 10 positions Number of rotations: 10 > 8000 rpm
used
FANUC Robodrill Alpha T14iB vertical machining center from the year 2000 currently working. It is equipped with a Fanuc 16i-M CNC control unit. The machine has a spindle speed of 15000 rpm. Machine weight: 2100 kg CNC
used
For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing
used
Robot Fanuc S-500iB, R-J3iB with 7th axis/motor YOC 8/2006 Control: R-J3iB Number of axles: 6 payload: 15 Kg working range: approx. 2757 mm Profibus Scope of delivery : Robot,Control,Cable,Teach panel,Instruction manual,Circuit diagrams 2 weeks commissioning warranty.No further warranty In addition, spare parts are constantly available from stock. Robot is fully functional and can be visited Ex works Freely loaded
used
Compact cell Fanuc ArcMate 100/7L with R30iB control, Lorch S3 pulse welder new Number of axles: 6 payload: 7Kg working range: approx. 1633 mm Year of construction: 2016 Table area each 750x500mm Overall dimensions: approx.:2500x1500x2200 Total weight: approx. 2000kg Net amount plus 19% VAT