We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,993 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Item number 90031-0068 Power Supply for Tetra Pak machines e.g. TBA 8, TBA 19, A 3 flex, TCBP 70 GE FANUC Series 90-30 High Capacity Power Supply Programable
used
TECHNICAL DATA: Main motor power KW: 90
used
technical details: - Position: GR 360 (pos. 5) - Diameter suction nozzle: 250 mm - Diameter pressure nodle: 250 mm - Steel impeller: curved - Air volume flow (V nominal): 5,400 m³/h - New engine Engine data: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 13.7 A - Frequency: 50 Hz - Speed: 2,920 rpm Dimensions (H x W x D): 1,130 x 850 x 690 mm Transport dimensions (H x W x D): 1,300 x 800 x 1,200 mm (on EURO pallet) Weight: 250 kg Consoles and vibration dampers can be requested and supplied on request. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
used
Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location
used
Three fans in good condition. LEP9905R. Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Division of the National Court Register, under the KRS No 0000874432, NIP (taxpayer identification number) 6912 ...
used
Suction blower MTV 6040 D Masch. Item no. 708,438 Motor power 11 kW 1450 rpm ø approx. 700 mm Year of construction 1982 The machine is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
used
Güntner GVH 102B/2x2N air-cooled condenser Patented Güntner support tube design All fans in ISO F version Performance data in R404A Condensing Block: The refrigerant-carrying core tubes are relieved by the patented support tube construction. This results in increased protection against leakage. Copper tube ∅ 12 mm, 50 x 25 mm offset Aluminium slats, spacing 2.4 mm Distribution and manifold pipes as well as pipe connections in copper Permissible pressure: ps=28 bar Permissible temperature: ts=100°C Ventilators: Low-noise axial fans with maintenance-free motors with protection class IP54, three-phase 400/3/50, according to DIN 40050 Execution: Insulating material class F Permissible conveying temperature -30 to +55°C All three-phase fans are generally equipped with 2 speeds (∆-Y switching) as well as speed-adjustable by means of Güntner control devices ...
new
EBM-PAPST S3G710 CG 98-07 Brand:EBM-PAPST Type:S3G710 CG 98-07 Stock number:M22-7107 Cooling capacity:0.0001 kW Number of fans:1 Voltage:400 Volts Power consumption:1,9 A Motor power:1,2 kW Dimensions:Ø 710 mm Year:2022 New/unused Number in stock:50 piece(s) Price: Quotation request Description: New unused EBM Papst E.C. fans (1010 rpm). Visit our website: used-refrigeration
new
Available in stock 2 x NEVER USED Industrial Ventilation Fans TSBD-3. The photos are only examples of the same model. The ventilation fans on sale have never been used and are still inside the original packaging. Specifications: Model: TSBD-3 Dimensions: 1100 x 1100 x 400 mm Flow: 32 500 m3/h Power: 0.75 kW Voltage: 380 V Frequency: 50 Hz Blade Diameter: 1000 mm Speed: 427 r/min Single phase
used
Max. air temperature: 650°C, volume flow: 2.78m³/s, rotational speed: 1460/min, power: 8.6kW.
used
Manufacturer: AXIS Type: 703MG7.5T Capacity: 3420 m3/h Vacuum: -270 mbar Operating pressure: 260 mbar Power: 7.5 kW
used
Manufacturer: Siemens Type: UD 0508/ 2186380-11 Power: 0.18 kW Speed: 1350 rpm Voltage: 230/ 400 V Frequency: 50 Hz Ingress protection: 55 IP New ! Dimensions: 47x47x25 cm
used
Manufacturer: Esta Ventilator, Year: 2006, Diameter intake mm: 150, Engine power kW: 1,1 Kw, rotations rpm: 2800, Direkt drive: yes, Year :2006
used
Manufacturer: Ernst, Type: Vakuumventilator, Year: 1993, Diameter intake mm: ca 120 mm, Engine power kW: 2,5, Flow rate approx. m3/h: 1500, V-belt drive motor: yes, Outlet side mm: ca.100, Year :1993
used
Manufacturer: Nestro, Type: N-300-B ex, Year: 1986, Diameter intake mm: 300, Engine power kW: 2,0, Flow rate approx. m3/h: 4300, rotations rpm: 1405, Direkt drive: yes, Ex-protected: yes, Year :1986
used
Manufacturer: Rippert, Type: Absaugventilator, Year: ca.1995, Diameter intake mm: 155 , Engine power kW: 1,3, Flow rate approx. m3/h: 1500, rotations rpm: 2860, Direkt drive: yes, Wight approx. kg: 60, Required space L x W x H mm: 800 x800 500, Vorführung möglich: yes, Year :ca.1995
used
Manufacturer: Rippert, Type: N-355 B, Year: 1995, Diameter intake mm: 355, Engine power kW: 3, Flow rate approx. m3/h: 3000-6000, rotations rpm: 1415, Direkt drive: yes, Pressing: 1080, Wight approx. kg: 200, Required space L x W x H mm: 1000 x1000, Year :1995
used
Manufacturer: Bartling Ventilator, Diameter intake mm: 400, Engine power kW: 18,5, rotations rpm: 2850, V-belt drive motor: yes, Enclosed impeller: yes, Suction side mm: 400, Outlet side mm: 400,
Manufacturer: 2 Stück Abluftventilatoren, Type: waren verbaut Sritzmaschine, Year: ca.2005, Diameter intake mm: 400, Engine power kW: 2,5/1720 , rotations rpm: 1720, Direkt drive: yes, Suction side mm: 400, Outlet side mm: 400 X 1000, Year :ca.2005
used
Manufacturer: Nordfab , Year: 2500, Diameter intake mm: 600, Engine power kW: 35, rotations rpm: 1475/1775, V-belt drive motor: yes, Year :2500
used
Manufacturer: Ritschle Seitenkanalverdichter, Engine power kW: 7,5, rotations rpm: 2930, Suction side mm: 70, Outlet side mm: 70,
used
Manufacturer: Rietschle, Type: G-BH1 2BH1900-7AH17, Engine power kW: 12,5, rotations rpm: 2950, Direkt drive: yes, Pressing: 280 mbar, Suction side mm: ca.100, Outlet side mm: ca. 100,
used
Manufacturer: Nordfab, Year: ca 2000, Engine power kW: 22/25, rotations rpm: 2850, V-belt drive motor: yes, Suction side mm: 500, Outlet side mm: 500, Wight approx. kg: 700, Ex-protected: no, Year :ca 2000
used
Manufacturer: Dietz Vakuumventilator, Type: HRD, Year: 1994, Engine power kW: 10,6 Ampere, rotations rpm: 2930, Direkt drive: no, Keilriemenantrieb Motor: yes, Keilriemenscheibe Flügelrad: yes, Saugseite mm: 90, Ausblasseite mm: 125, Wight approx. kg: 120, Year :1994
used
Manufacturer: Ventilator, Diameter intake mm: 250/190, Engine power kW: 5,5, rotations rpm: 960, Outlet side mm: 250,
used
Manufacturer: Rippert, Year: ca.1995, Diameter intake mm: 450, Engine power kW: 18,5, Flow rate approx. m3/h: 7500, rotations rpm: 1470, Year :ca.1995
used
Manufacturer: Dietz Vakuumturbine, Type: HRD 2/5 T, Year: 1994, Engine power kW: 9,0/5,2 Ampere, rotations rpm: Flügeglrad/5550<CRLF>Motor 2880 /Umin, Direkt drive: no, Keilriemenantrieb Motor: yes, Saugseite mm: 90, Ausblasseite mm: 90, Wight approx. kg: 100, Exgeschützt: yes, Year :1994
used
Manufacturer: Ventilator, Diameter intake mm: 250, Engine power kW: 5,5, Flow rate approx. m3/h: 4500, rotations rpm: 2980, Direkt drive: yes, geschlossenes Flügelrad: gekröpft, Ausblasseite mm: 250250, Wight approx. kg: 500,
used
Hersteller : Nordfab, Diameter intake mm: 300 mm, Engine power kW: 5,5 / 6,4 kW, rotations rpm: 1435 / 1735 , Direkt drive: yes, Wight approx. kg: 150,
used
Diameter 1,220 mm (48") 1,480 rpm. 380/420 V 50 Hz max. temp. 40 °C 36 kWo
used
Manufacturer: Piller, Type: RG 11 Vakuumturbine, Year: ca.1990, Diameter intake mm: Kw 4,75, Engine power kW: Drehzahl 7000, Flow rate approx. m3/h: war verbaut in schleifmaschine, rotations rpm: 0,42 m³/s , Direkt drive: Druckgussgehäuse, V-belt drive motor: Saugseite 100 mm, V-belt pulley impeller: Austritt 100 mm Durchmesser, Year :ca.1990
used
Manufacturer: Höcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004
used
Manufacturer: Bartling, Type: Späneventilator, Year: ca.2008, Diameter intake mm: 400, Engine power kW: ca.18,5, Flow rate approx. m3/h: ca.8500, rotations rpm: 2850, Direkt drive: no, V-belt drive motor: yes, Enclosed impeller: yes, Outlet side mm: 400, Year :ca.2008
used
Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemenst 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg
used
- Motor 11 kW - Connection DM. 300 mm - Start-up control Available from January 2024!
used
intake connection: 300 mm; exhaust connection: 300 mm; air flow: 6900 m³/h; motor power: 5,5 kW; weight: 100 kg; Very stable blower with steel impeller.
used
Cellar SMM 012.0 Extraction blowers Diameter 120/120mm Air flow rate 700 Nm³/h 0.55kW
used
Keller SMM 016,0 Extraction blowers Diameter 160/160mm Air flow rate 1200 Nm³/h 1.5kW
used
Cellar Extraction blowers 1.8kW
used
Faecherklebebinder - Fanbinder Schmedt PraeColl Year 1986 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Faecherbindegeraet - Fanbinder Schmedt PraeColl Year 1974 - Serial-No. 91 Book block thickness max. ca. 80mm Book block height max. 345mm Power supply 230V (A. C.) -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Dust suction hood: 350 mm Air consumption: 8.000 m³/h Motor output: 15 kW : 3.550 pa The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Robotized cell for 3D laser cutting 3D laser cutting cell, powered by a TRUMPF LASER TRUDISC 2000 (FD24) source. The line includes: ROBOT FANUC R-2000iB 165 F year. 2007.XII. + CABINET + TEACH PENDANT HEAD FOR LASER CUTTING PRECITEC LD 30C D50 YR30 LENZE MCM09C30 -RS0F1 SYNCHRONOUS SERVO DRIVE 2 PCS ROTARY TABLE EXPERT-TUNKERS TYPE ED920 / 1655/2 POWER SOURCE TRUMPF LASER TRUDISC 2000 (FD24) SICK SAFETY CURTAINS INSTALLED ALBANY DOOR HIGH-SPEED DOOR SYSTEM MP300 CONTROL PANEL SIEMENS SIMATIC MULTI PANEL + SOFTWARE CONTROL CABINET FIBER OPT CUTTING CELL (external 3.4 x 5.2 m, height 2.9) Additionally, we include full cabling necessary for the operation of the 3D cell. If you have any questions, we remain at your disposal
used
Locker metal light grey approx. 120x191h cm, 15 doors
used
Description: Fans, suitable for cooling the machine electronics, 4 pieces Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 30 kg
used
Description: Batch consisting of 6 fans with motor for suction Approx. Onsite Dimension. (l x w x h): 2,000 x 1,400 x 1,000 mm, weight approx.: 220 kg
used
Günther roof condenser, 3 fans, type: GVH 100.2C/3-L(D), serial number: 400/3340514.0001, year of construction: 2009, dimensions: 6000 mm x 1620 mm x 1850 mm.
used
Günther condenser, 3 fans, type: S-GVV 080.3B/3-ED.E, serial number: 400/3340531.0001, year of construction: 2009, dimensions: 6310 mm x 1150 mm x 1320 mm.
used
Description: 230v 260rPM 1200m3/min speed adjustable construction kit emergency stop casters with brake 6 blades 950w Approx. Onsite Dimension. (l x w x h): 1,900 x 600 x 2,000 mm, weight approx.: 46 kg
used
General SKU245P329 LocationBarneveld MakeRotamill TypeRO 15.56.2R Main Features MaterialStainless steel Motor6.3 KW Specified Features - Scrubber CapacityCentrifugal fan 1000 m3/h Column sizesdia. 550x1200mm With jacketcheck Max. temperature70 degr.C. Motorfan 1,8/6,3 KW, 400 Volt (Ex.) Scrubbers Diameterscrubber 550mm Lengthscrubber 1200mm Rotor speedfan 2900rpm MaterialStainless steel 1.4301 (304) Information Mounted in framecheck Floorspace1,0x0,8 M Total height2,5 M Weight300 KG Extra SpecificationsScrubber inlet dia. 40mm , outlet dia.150mm , jacket (2x)dia.15mmScrubbersRotamillColumns > ScrubbersBrand > Rotamill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...