We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,247 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
- Radial fan GRUSS - Type SP 300 - Motor 11 kW - 2900 rpm Lxzqt - Suction side Round D= 300 mm - Starting side rectangle 300 x 210 mm
used
Fan Drive: 22 kW
used
technical details: - Position: GL 360 (pos. 1) - Speed: 1,450 rpm = slow speed - Volume flow: 6,500 m³/h - Size: 355/4 - Power: 11 kW - Pg: 230 for air at +20°C and density = 1.2 kg/m³ - Voltage: 380/600 V (triangle/star) - Current: 22.5/13 A - Frequency: 50 Hz - Weight: 323 kg Metrics: - Housing (H x W x D): 1,475 x 800 x 1,260 mm (incl. motor) - Diameter suction nozzle (suction side): 380 mm - Diameter pressure connection (pressure side): 320 mm Transport dimensions (H x W x D): 1,630 x 800 x 1,200 mm (on EURO pallet) The fan was completely refurbished and painted in our house. Among other things, the motor shaft bearings were renewed. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
used
technical details: - Position: GR 360 (Pos.5) - Diameter suction nozzle: 300 mm - Diameter pressure nozzle: 280 mm - Volume flow: max. 4,600 m³/h - Pg : 275 for air at 20°C and ρ =1,2 kg/m³ - Steel impeller straight + + + New engine + + + electrical connection: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 14.3 A - Frequency: 50 Hz - Speed: 1,450 rpm - Dimensions (H x W x D): approx. 1,580 x 1,380 x 760 mm - Transport dimensions (H x W x D): 1,800 x 1,400 x 800 mm (on EURO pallet) - Weight: 400 kg The fan has been cleaned and checked for correct functioning. The engine was renewed and the impeller balanced. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
used
technical details: • Position: GL 360 (pos. 1) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,380 m³/h • Pressure increase: max. 2,000 Pa • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 560 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 3.0 kW • Voltage: 380 V • Current: 6.15 A • Frequency: 50 Hz • Revolution: 2,840 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
used
technical details: • Position: GR 360 (pos. 5) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,820 m³/h • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 590 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 4.0 kW • Voltage: 380 V • Current: 8.4 A • Frequency: 50 Hz • Revolution: 2,885 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
used
Manufacturer: Trane Type: CLCE 1810 Manufacturing year: 2005 Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electro motor: Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW
used
technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
used
technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
new
Fan Ziehl-Abegg, type FN 050-VDH.4I.V7P1, 500mm diameter, 1340-940/ min. NEW
used
Fan motor JILMA Type: SZK b6517 LP Voltage: 220 V Frequency: 50 Hz Shaft diameter: 4 mm New ! Dimensions: 60 x 60 x 60 mm
used
Fan ETRI 113 XN ( 113XN ) 01 81 000 ( 0181000 ) Metal case 12 W 220 V unused ! Dimensions: 92 x 92 x 39 mm
used
Axial fan, EBM PAPST 8414 NGH Blade diameter: 70 mm Installation dimensions: 80 x 80 x 25 mm 2.8 W 24 V DC New ! Dimensions: 100 x 100 x 100 mm
used
three-phase electric motorwith forced fan VEM K21F 160M 2 TWS HW ( K21F160M2TWSHW ) 11 kW 2890 - 2910 rpm 38388 0 - 420 / 660 - 725 V IP 55 shaft diameter: Ø 38 mm Flange diameter: Ø 300 mm used, tested ! Dimensions: 680 x 300 x 380 mm
used
axial fan ZIEHL-ABEGG series FB 4-bladed aluminium sheet blade diameter: 497 mm voltage: 400V frequency: 50 Hz rating:: IP 54 Dimensions: 590 x 590 x 225
used
Fan motor, single-phase motor EMERSON F48HXDZP-2106 0,06 kW 1550 rpm 230 V 50 / 60 Hz bolt circle diameter (mounting): Ø 96 mm shaft diameter: Ø 10 mm New ! Dimensions: 160 x 125 x 125 mm
used
Heatsink with two fans PAPST TYPE 4650 N 2 Fan 230 V 19 W Dimensions: 430 x 410 x 210 mm
used
Fan motor, three-phase electric motor VEM KMRB 56 G 4 ( KMRB56G4 ) TGL 11856 0,18 kW 1360 rpm 220 / 380 V IP 54 shaft diameter: Ø 11 mm Flange diameter: Ø 81 mm bolt circle diameter: Ø 65 mm, thread: M5 New ! Dimensions: 180 x 110 x 150 mm
used
Fan motor VEM EBMOa 63 K2 154/FTII/2 ( EBMOa63K2154/FTII/2 ) TGL 20675 0,25 kW 2830 rpm 220 V IP 44 shaft diameter: Ø 11 mm flange diameter: Ø 90 mm bolt circle diameter: Ø 75 mm, Thread: M5 New ! Dimensions: 200 x 135 x 165 mm
used
Fan motor VEM EBR 63.2/2 FTII ( EBR63.2/2FTII ) TGL 11856 0,18 kW 2880 rpm 220 V IP 44 shaft diameter: Ø 11 mm Flange diameter: Ø 90 mm bolt circle diameter: Ø 75 mm, thread: M5 New ! Dimensions: 175 x 120 x 155 mm
used
Fan motor, electric motor VEM KD 71.2 /2 ( KD71.2/2 ) TGL 20675 0,6 kW 2810 rpm 220 / 380 V 3AC IP 44 shaft diameter: Ø 14 mm Flange diameter: 105 mm New ! Dimensions: 230 x 140 x 190 mm
used
Fan motor, electric motor VEM LM63.1/2-E1 TGL 20675 0.14 kW 2870 rpm 220 / 380 V 3AC IP 44 shaft diameter: Ø 9 mm New Dimensions: 180 x 110 x 130 mm
used
Fan motor, three-phase electric motor HELIOS HQD 63/4 ( HQD63/4 ) 1,5 kW 1400 rpm 220 / 380 V 3AC IP 55 shaft diameter: Ø 24 mm New ! Dimensions: 350 x 170 x 170 mm
used
Geared motor with forced fan SIEMENS FDU1109/2075132001 2KJ1202-1CE13-1FJ1-Z DF28-LA71M4F 0,37 kW 19.1 rpm 230 / 400 V IP55 shaft diameter: 25 mm New ! Dimensions: 580 x 230 x 180 mm
used
Axial fan VEM, TURBOWERKE Meißen LANEW 250 TGL 0/63 1210 - 1640 m3/h 16 - 5,3 kp/m² impeller: Ø 245 mm inner diameter: Ø 250 mm motor: YMa 56 K 4 0,18 kW 2760 rpm 220 / 380 V New ! Dimensions: 315 x 315 x 220 mm
used
Axial fan insert EBM PAPST 3 x 4650 N Front panel: 480 x 45 mm Insertion dimensions: 400 x 22 50 x 45 mm 3 x 19 W 230 V AC 50 / 60 Hz Material insertion: stainless steel used, tested ! Dimensions: 480 x 45 x 290 mm
used
Centrifugal duct fan S & P VENT-400L impeller (aluminium): Ø 400 mm nominal diameter: 400 mm motor: 0.4 kW 1250 rpm 230 V 1AC IP44 as good as new ! Dimensions: 620 x 570 x 440 mm
used
Axial fan VEM, TURBOWERKE Meißen LANV 630 Volumetric flow: 6234 - 10500 m3/h Total pressure increase: 26 - 9 kp/m² Density: 1,2 kg/m3 temperature: 20 °C impeller: Ø 620 mm inner diameter: Ø 630 mm motor: YMR 80 K6 0,75 kW 930 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested ! Dimensions: 810 x 810 x 350 mm
used
Axial fan VEM, TURBOWERKE Meißen LANV 630 Volumetric flow: 9365 - 15200 m3/h Total pressure increase: 58 - 24 kp/m² Density: 1,,2 kg/m3 temperature: 20 °C impeller: Ø 620 mm inner diameter: Ø 630 mm motor: YMR 100 S4 3,0 kW 1430 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested ! Dimensions: 810 x 810 x 430 mm
used
Ex-protected centrifugal fan, 8.3m³/min, MXE 010-000830-00, Reitz, mint condition -40% Special price ! The current new price of a similar product is approx. € 1,980 excl. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. We can provide you with the complete technical data and documentation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...
used
Fan motor, three-phase electric motor LEROY SOMER, EMERSON 6P CM29/T ( 6PCM29/T ) 1,1,4 kW 950 rpm 400 V 3AC IP 55 shaft diameter: Ø 19 mm flange: 258 x 146 mm New ! Dimensions ( engine ): 390 x 260 x 190 mm Dimensions ( packaging ): 420 x 300 x 280 mm
used
Fan Impeller, Axial Impeller WINGFAN P9TR Diameter: Ø 990 mm Necessary shaft diameter: Ø 48 mm Wavelength: 112 mm Groove width: 14 mm Hub diameter: Ø 100 mm hub length: Ø 70 mm New ! Dimensions: 9990 x 990 x 210 mm
used
Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: Witt & Sohn, mushroom hood type PK wd 500 x black. vz -Hood opening: can be closed mechanically, hand wheel -Bolt circle Ø 550 x 12 mm -Number: 2x hood available -Price per piece -Total dimensions: Ø 905 x 820 mm -Weight: 89 kg/pc.
used
Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm -Weight: 21 kg
used
Radial fan REITZ RGE 025-000530-00 GL 360 degree design 0.75 kW 5 m³/min 250 mm water column Intake: ø 130 From: ø75 Good condition, test run carried out
used
Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhoehung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Hardly used exhaust fan - was only in operation from 2015 - 2019 and was then dismantled again Data sheets available Engine power: 110 kW Flow rate 80,000m³/h Matching exhaust tower with heat exchanger can be purchased as an option, but is very large (3.33.810m)
used
Fan for chip transport
used
Description: Lot composed of approximately 113 spacers for YANMAR fan - art.129457-44760 ITEMS NEVER USED STILL IN ORIGINAL PACKAGING Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 15 kg
used
GEA Goedhart evaporator, 1 fan, type: SPB 061 D HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P164710627, year of construction: 2007, dimensions: 1000 mm x 500 mm x 500 mm.
used
Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.
used
Type: RHS 1 U 200 GR 360, built 1995. Centrifugal blower in special steel, 3.000 m³/h, 1,2 kp/m³, Drive: Loher, 4.500 RPM, 5,5 kW, on base frame with suction- and pressure-bellows and 7 vibration dampers, in mint condition.
used
Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in ...
used
Used ceiling heater,Ideal for workshops Heat output:90/70-15C 39.5 KW Electrical voltage 1by230V Air volume flow:4640m3/pc. Speed 1330rpm Max feed temperature130C Max operating pressure 11 bar Weight 43Kg
used
complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum ...
used
Suction blowers 11 kW approx. 1200 mm direct drive
used
ABEGG Ventilatore ZIEHL. noch nie benutzt NEW 4 PCs.
used
Te Coop: Westfalia Centrifugaalpomp type MZB 10 6 fans. Seal on watercooling op flens 1 P11 96 PD 6 bar. Machine no. 1713-935 Max type 1700 rotation/minFlender ATB-Loher Electorpomp ANGa 132MB 06D 4 KW 220 / 380 V 16/9.3 A