facing head used for sale

This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information.

1 -Teste revisionate in permuta dell'usato serie 3 Jenbacher- reUp exchange cylinder head (overhauled) type 3 Jenbacher. Jenbacher cod. REM9016986 In this case you will have to return the used cylinder head to us. If your cylinder head cannot be overhauled, you will have to pay us €1000.00 for failure to exchange goods. 2 -Teste revisionate senza permuta dell'usato serie 3 - NO EXCHANGE cylinder head (overhauled) type 3 Jenbacher. REM9016986 In this case you will not have to return the used cylinder head to us. EMAIL: sales@punto4srl.com administration@punto4srl 1 -Teste revisionate in permuta dell'usato serie 3 Jenbacher- reUp exchange cylinder head (overhauled) type 3 Jenbacher. Jenbacher cod. REM9016986 In questo caso dovrai restituirci la testata usata. Se la testa del cilindro non può essere revisionata, dovrai pagarci €1000,00 per la mancata sostituzione dell ...

MultiWeigh MW 16 Head Combination Weigher – High Accuracy | Fully Complete | 2015, High speed machine with memory buckets, We offer this MultiWeigh MW 16-head combination weigher, manufactured by HD-Wiegetechnik Sondermaschinen GmbH (Germany). MultiWeigh is globally recognized for precision weighing technology, reliability, and long service life in the food processing industry., This machine is fully complete, in good working condition, and supplied including collecting chute, making it ready for immediate production use., Technical Specifications, - Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH), - Machine Type: MW 16 2.01 57° 3 MIX, - Number of Weighing Heads: 16 with memory buckets (high speed), - Control System: IPC 511, - Scale Interval (d): 1.0 g, - Scale Interval (dw): 5.0 g, - Operating Temperature Range: 0 – 45 °C, - Year of Manufacture: 03 / 2015, - Certi ...

2 Head Automated Cask Washer - Second Hand 2 heads cleaning, stainless steel cask washer, with rotating spray balls. Heated detergent tank Air Actuated Valves Single Phase 240 Volts Manufactured by ABUK - 10/07/2004 Serial Number: AB06 For more information and more available stock please visit us at - advancedbrewing.co.uk

Double eyeletting machine Hang 87 D Serial-No. 17040 Projection 320mm Release via foot switch 300mm Release via 3-point switch 250mm Working height 900mm Cycle time/capacity 0,5 sec Width 1200mm Depth 900mm Height 1450mm Net weight 420kg Gross weight 480kg Cycle time 0,5sec

Double head eyeletting machine Hang 87 D Serial-No. 31583

BOSTON 4 head flat and saddle stitching machine double wire

BOSTON 4 head flat and saddle stitching machine double wire

1 head packer Vdf container

We will be happy to visit you and plan your machine. Addition, adaptation of crate bottle conveyors can be carried out by us. We can also manufacture new gripper heads.

We will be happy to visit you and plan your machine. Addition, adaptation of crate bottle conveyors can be carried out by us. We can also manufacture new gripper heads.

Technical Specifications & Performance Data This Robino & Galandrino single-head capsuling machine is a robust, compact solution for small to medium sparkling wine runs on a used bottling line. Purpose-built for 0.75 L glass bottles and Spumante applications, it delivers consistent capsule application and stretching quality at an artisanal yet efficient pace suitable for second hand industrial packaging environments. Manufacturer: Robino & Galandrino Model: 1 Head Year of manufacture: 1985 Category: Capsuling machine No. of heads: 1 Speed: up to 1500 bph Bottle format: 0.75 L (sparkling wine) Container type: Glass Product type: Spumante and related sparkling wines Capsule type: 1, 2 (per manufacturer classification) Rotation direction: 2 (per manufacturer specification) Capsules stock: 0 Condition: In storage Technical measurements: compact single-head footprint; detailed dimensions and  ...

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW

Out of valve production

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

faceplate diameter: 0 mm turning diameter over slide rest: 900 mm turning length: 1.000 mm total power requirement: 25 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine ...

Ravensburger, Type KT 45, built in 1978 Tip height above bed 600 mm Tip width faceplate for support 450 mm Face plate diameter 1,000 mm Turning diameter in the recess max. 1,350 mm with digital display Power 18.5 kW

Facing and Centering machine WMW FZWD 600x900.

Center height: 700 mm Center width: 1800 mm Gr. Circulation Ø over bed/in offset: 1300/1740 mm Rotary Ø over support slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Upper support adjustment: 350 mm electr. Connection: 380 V, 6.6 kW Weight approx.: 5.5 t Space requirement: 3800 x 1600 x 1700 mm

PADE model 1000/N trimming-milling-drilling machine: – automatic sliding worktop – blade for header D=400mm, 3 hp motor – milling machine with shaft D=30mm, 5 hp motor – 5-spindle drilling machine, 360° adjustable, 3 HP motor Machine not CE compliant, for export

max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3 Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing th ...

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Sensor, write head, read head, write-read head, read-labeling station -Manufacturer: Siemens, Moby-M reading and labeling station LBS-32 Ovp -Type: 6AW5454-8BH -Dimensions box: 150/40/H40 mm -Weight: 0.2 kg

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

Tumbler rivet head BODMER KÜSNACHTType FMK 3Year of construction approx. 1980Rivet shank diameter: max. 10 mmTool diameter: 12 mmRivet head stroke: 40 mmRivet spindle speed: approx. 1400 rpm. Motor power: 0.37 kWNeching connection: 380 volts, 50 Hz- rivet pressure adjustment via the hydraulic pressure infinitely variable- micrometer stop for stroke limitation- lifting movement via oil hydraulics (max. 45 bar)- machined flange surface 115 mm with fastening nut to the housingTotal length: approx. 800 mmWeight: approx. 40 kggood conditionThe rivet head has a

Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

with 3-jaw lining Röhm - 200 mm - 15 pitch

Cylinder head Wichmann AX AXG AXAG

Deutz cylinder heads in exchange complete with new valves, seat rings+guides Head screws FL712/812 = Net 36,-/piece Head seal kit FL712/812 = Net 25,-/set all prices per piece plus. law.Tax.Price changes reserved. info@miw-zeven.de

screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI

Reconditioned cylinder head

Cylinder head Exchange

We offer new cylinder heads with valves+springs fully assembled from stock immediately available to: MIW Ltd. Engine Repair Plant North-West Ring 8 D-27404 Zeven / Germany Tel:0049(0) 4281-950583 Fax:0049(0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

Cylinder head recon E-start

Reconditioned cylinder head

Cylinder head Exchange

Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de

Cylinder head complete with valves in exchange info@miw-zeven.de

Cylinder head Exchange

Cylinder head Exchange

Cylinder head Exchange

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.