facing head used for sale

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm

Face and boring head WMW C 100 - 40 TGL 32680 Mounting: SK40 Rotary chisel: Ø 20 mm used, tested ! Dimensions: 190 x 100 x 83 mm

Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm

Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm

Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Code 151295 Description Facinglathe with center Make WMW NILES Model DP 1 / S 2 Serial number 261 526 149 Year of make 1986 Max. centerheight over base plate 1250 mm Max. swing over base plate 2480 mm Max. swing in Gap 3100 mm Distance between centers 4000 mm Max. workpiece weight betw. centers 10.000 kgs Spindle bore 100 mm Movement slide ( max. ) 1000 ( + 750 ) mm crossslide 630 mm toolslide 200 mm 18 Speeds 5,6 – 280 rpm Motorpower 45 kW Total power 55 kVA Machine weight total ± 18000 kgs Accessoiries 4 chuck facingplate of Ø 1250 mm Condition Machine is in very good condition

Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...

turning diameter:2000 mm faceplate diameter:2000 mm max. workpiece weight:6000 (fliegend) kg weight of the machine ca.:30 t main drive motor:55 kW

max. workpiece diameter:110 mm min. workpiece diameter:3 mm workpiece length:30 -400 mm total power requirement:11 kW

Facing lathe DP 800

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Turning diameter: 1900 mm Turning length (Z-axis): 2500 mm Spindle bore: 102 mm Turret positions: 0 Motor power: 45 HP/kW Chuck diameter: 500 mm Swing over bed Ø:        1900mm Swing over cross slide Ø:1520mm DBC Turning Length:      2500mm Spindle bore:            102mm Spindle power:           45kW Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Length:                  6800mm Width:                   2800mm Height:                  2800mm Weight:                  10000kg

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

Turning diameter: 3000 mm Turning length (Z-axis): 3000 mm Spindle bore: 0 mm Turret positions: 0 Motor power: 0 HP/kW Chuck diameter: 0 mm CNC Model: 0 Max. thickness in 40 Kg/mm2 13 mm Max. thickness in 60 Kg/mm2 10 mm Max. workpiece:        3000Ø Maximum sheet thickness:13mm Max. dishing radius:   40mm Min. product Ø:        800 Length:                2875mm Width:                 990mm Height:                2010mm Weight:                2120kg  

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

MKW Gathering Machine Rapid UT B3, with SFT 350, 8 stations, with circulating conveyor belt, with booklet/fold and front trimming

Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW

Key data: 1800 mm, 3000 mm

Center width: 3000 mm Rotation diameter: 1800 mm above bed / 2800 mm above floor Workpiece weight: 8,000 kg max. Jaw chuck: Ø 1800 mm Speed range: 1.8 - 180 rpm. Spindle passage: 220 mm 3-Axis Digital Readout: Easson ES-14 Equipped with: - Motorized tailstock - Various tooling -Operating instructions Country of origin: Germany Engine power: 34 kW Machine weight: 21.000 kg

Large head lathe Automatic feed in both axes Face plate 800 mm Turning diameter max. approx. 1400 mm more technical data - see pictures

Description: x-way 725 mm z-way 400 mm ManualPlus 620 control unit Speed - level 1 5 - 250 rpm Speed - level 2 5 - 710 rpm Description: 4-fold steel holder PARAT 'manual' Manually operated face plate RÖHM 4 jaws Ø 1000 mm turning diameter over slide: 1,400 mm, faceplate diameter: 1,000 mm, total power requirement: 55 kW, weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,500 x 2,100 mm

:FB-15 | FB-20 | FB-25 | FB-30 turning diameter:1500|2000|2500|2500 mm faceplate diameter:1500|2000|2500|2500 mm turning length:330 mm max. workpiece length:450 mm bed width:450 mm max. workpiece weight -without tailstock:3000 kg width of cross cariage:250 mm spindle bore:155 (230 opt.) mm spindle nose:A2-11 (A2-15 opt.) spindle cone:7 MK spindle speed:4-600|4-600|4-400|4-400 1/min spindle speed steps:4 cross way of carriage:330 mm movement longitudinal:1000|1000|1500|1500 mm spindle drive:22 (29 opt.) kW servo motor X-axis:ß12/3000i 1.8kw |ß12/3000i 1.8kw|1FL6067 2.0kw|1FL6067 2.0kw servo motor Z-axis:ß22/3000i 3kw |ß22/3000i 3kw |1FL6092 3.5kw|1FL6092 3.5kw ball screw:Ø25mm x P5 x C3 (X-Achse) ball screw:Ø40mm x P10 x C5 (Z-Achse) mm rapid power traverse in X-and Z direction:6/8 m/min number of tools:4 tool post size:32x32 mm weight of the machine ca.:7000|7500|8000|10000 kg Mach ...

max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc.

max. workpiece diameter:160 mm min. workpiece diameter:20 mm workpiece length:3300 mm Sawn round material sections are clamped using prismatic hydraulic clamps left and right, and in one operation the two front surfaces can be milled to length and machined with a center hole and/or thread.

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

small die-head with 60, 80 or 100 mm die-insert, with cooling ring

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S

new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

Shipping within Germany 8.- insured VAT not deductible

Boring head, spindle head, drilling head, plunge drilling head, grooving head, spindle drilling head, boring head, universal boring head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: UBS Gr.1 -Intake: SK40 -Setting accuracy: 0.02 and 0.01 mm -Accessories: see photos -Dimensions of the case: 240/125/H100 mm -Total weight: 4.0 kg

diameter:400 mm tool adaptor:MK 5 Weight:10 kg Slide cross:52 mm Good condition Wohlhaupter facing head with Morse taper 5

We have a wide range of dosing devices in our warehouse and workshop. Several Yamato, Ishida, Combimat multi-head scales. Lots of Rovema, Webb snail dosages! Depending on your product, your wishes and possibilities, we can offer you a suitable dosage.

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

with 3-jaw lining Röhm - 200 mm - 15 pitch

Deutz cylinder heads in exchange complete with new valves, seat rings+guides Head screws FL712/812 = Net 36,-/piece Head seal kit FL712/812 = Net 25,-/set all prices per piece plus. law.Tax.Price changes reserved. info@miw-zeven.de

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen. info@miw-zeven.de

We offer new cylinder heads with valves+springs fully assembled from stock immediately available to: MIW Ltd. Engine Repair Plant North-West Ring 8 D-27404 Zeven / Germany Tel:0049(0) 4281-950583 Fax:0049(0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de

Column heads, various manufacturers Three-foot stand, Doka Three-foot stand, div. manufacturer Three-foot stand with chain (various manufacturer) Three-foot stand with chain (div. hesteller), without wedge C20 Suspension Z (approx. quantities) Scaly bracket Z (approx. quantities) Scaly bracket, painted (approx. quantities) galvanized lattice box DB grid box