face to face used for sale

Centre Distance 1.000 mm Max. Swing over Bed Ø 400 mm Max. Swing over Cross slide Ø 200 mm Spindle bore Ø 54 mm R.P.M. 22.4 – 2,000 (24x) kW 5.5 Volt 380 Cycles 50 Auction-ID: A1-45737-150

CNC MILLING MACHINE Inv. No. 12.565J Make TOS Model FGS 40/50 CNC Mach. No. 43400083 Control Heidenhain TNC 355 Table 400 x 1,250 mm Longitudinal Travel (X) 850 mm Cross Travel (Y) 500 mm Vertical Travel (Z) 500 mm Taper ISO 50 R.P.M. 35 – 1.800 kW 7,5 Volts 380 Cycles 50 Auction-ID: A1-45737-198

TEACH-IN LATHE Inv. No. 13.224C1 Make TOS TRENS Model SUI500 COMBI Serial number 69005015010003 Control heidenhain Center distance 1500 mm Max. swing over bed Ø 500 mm Max. swing over cross slide Ø 290 mm Spindle bore Ø 71 mm R.P.M. 8 – 2.800 KW 11 Volts 380 Cycles 50 Including: 3-jaw chuck Emergency stop. Threading Coolant system Safety protection screen problem in cabling Auction-ID: A1-45737-196

CONVENTIONAL LATHE Inv. No. 13.038C1 Make TOS Model SUI 50 Serialnumber 150200900558 Centre Distance 2000 mm Max. Swing over Bed Ø 500 mm Max. Swing over Cross Slide Ø 320 mm Max. Swing in gap Ø 560 mm R.P.M. 14 – 2240 kW 7 ,5 Volts 400 Cycles 50 Including : DRO Coolant Emergency stop Safety protection over chuck Auction-ID: A1-45737-133

CNC HORIZONTAL MACHINING CENTER Inv. No. 12.178MM Make TOYODA Model LINEAM III Control MELDAS M650 Year 2004 TABLE Pallet size 450 x 450 mm Max. load on pallet 400 kg Table indexing increment 0.001 degrees STROKE X-Axis stroke 630 mm Y-Axis stroke 630 mm Z-Axis stroke 700 mm Distance from spindle center to top of pallet 50 – 680 mm Distance spindle nose /center rotary index table 50 – 680 mm FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20,000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2.5 sec. DRIVE MOTOR Spindle drive motor Ac 45/30 kW MACHINE WEIGHT & POWER REQUIREMENTS Machine weight 15.000 kg Power requirement 96 kVA ACCESSORIES: Spindle linear mo ...

Workshop press PROFIGARAZ 12 tons

Silver coin Italy 5 Euro 2007 Arturo Toscanini 925, rough weight 18 gr, proof, KM323, mintage 7.000 pieces, case

Coin Set Slovenia 2005 10 Stotinov - 500 Tolarjev, pp, total 588.80 Tolarjev, mintage 1.000 pieces

Coin Set Slovenia 2006 10 Stotinov - 500 Tolarjev, pp, total 588.80 Tolarjev, mintage 4.000 pieces

Coin Set Slovenia 1996-1999 each 10 Stotinov - 5 Tolarjev + 1996 5 Tolarjev Olympia + Tolarjev Independence + 5 Tolarjev 150 Years Railway + 1997 5 Tolarjev Ziga Zois total 55.20 Tolarjev, mintage 500 pieces

KMS Slovenia 2004 10 Stotinov - 50 Tolarjev, pp, total 88.80 Tolarjev

KMS Slovenia 2000 10 Stotinov - 10 Tolarjev, pp, total 18.80 Tolarjev

KMS Slovenia 1992 10 Stotinov - 5 Tolarjev, pp, total 8.80 Tolarjev

KMS Slovenia 2001 10 Stotinov - 100 Tolarjev, pp, total 118.80 Tolarjev

Coin Set Austria 2003 st 1 ct - 2 Euro total approx. 3.88 Euro

With contents, grinding wheels in different sizes and designs, 5 shelves Auction-ID: A1-46045-23

With contents, 6 shelves, suitable for lot 221 Auction-ID: A1-46045-222

Garos GBT300 Totebin tumbler 2018, Stainless, totebin mixer, the complete answer for tumbling, mixing, coating and marinating, HMI touch screen controls with programmable cycles, 3Ph

Construction tools such as spotlights, trolleys, power cables

Tools such as construction tray with chain, cable hoist with hand rope, various rollers and sling irons, etc.

Lifting pliers 1 pc. curb, 1 pc. plate lifter

Bolt Setting Tool SPIT P60 BS 4078, SN 001002 Small quantity Accessories, Case

without content mobile with movable layer Auction-ID: A7-46287-196

Content consisting of various hand tools, such as screwdrivers, open-end wrenches, screws and other workshop supplies Auction-ID: A7-46287-161

Including: 1x Heuer vice clamping width 150mm, 1x T-slot clamping block, 3x V-block 1x H 450mm 2x H 70mm Auction-ID: A1-45979-217

Portable end mill sharpener is accurate and rapid, easy operation with no skill to grind. Can grind 2-flute, 3-flute, 4-flute end mill. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material. Grinding Range:Φ4-Φ14, Point Angle:0°~5°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:SDC (for carbide material)×1, Six collets:Φ4,Φ6,Φ8,Φ10,Φ12,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 350 x 250 x 250 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-273

Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 75 x 197 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-354

Content consisting of various hand tools Auction-ID: A7-46287-172

Content consisting of various hand tools Auction-ID: A7-46287-202

Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 210 x 100 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-263

Including 1x Rodac impact wrench, 1x Rodcraft 5100A drill, 1x Sumo S-4737-X drill, 1x Dotco drill, 1x Dotco eccentric sander, 1x Sprio cup sprayer. Auction-ID: A1-45979-185

Consisting of: various ISO 20 holders, Depo, precision holders Auction-ID: A1-45979-13

Content consisting of a vice, jaw width: 80 mm and a four-jaw chuck with diameter: 200 mm, a four-jaw chuck with diameter: 200 mm, a three-jaw chuck with a diameter of 160 mm, a three-jaw chuck with a diameter of 130 mm, and a four-jaw chuck with a diameter of 120 mm as well as twist drills, cylindrical pins, countersinks, taps, collets, disc milling cutters, tips Auction-ID: A7-46287-76

1x Type G 12SA angle grinder, 1x VTV-16 drill, 1x Type M 12VE router Auction-ID: A1-45979-210

Consisting of: various ISO/HSK A80 holders, including Haimer, Seco, EPB, precision holders (G2.5 balanced). Auction-ID: A1-45979-11

Portable end mill sharpener is accurate and rapid, easy operation with no skill to grind. Can grind 2-flute, 3-flute, 4-flute end mill. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material. Grinding Range:Φ4-Φ14, Point Angle:0°~5°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:SDC (for carbide material)×1, Six collets:Φ4,Φ6,Φ8,Φ10,Φ12,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 350 x 250 x 250 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-101

Specialize in grinding screw tap. It's precise, easy operation and efficient, also can save large sum of expense for purchasing blade annually. With diamond wheel, can be secondary re-used, with accurate angle and long service life. The electrical controlled high-rate DC motor features stable power, strong horsepower, efficient and long service life. Patent product can grind all the front cutting face, also include the front cutting lip. M20 tap shank is within 14 for grinding. Point Angle:5°~30°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS), Standard collets:Φ5,Φ7,Φ8,Φ9,Φ13,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 360 x 270 x 310 mm; Approx. Weight: 16kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-132

4 UNITS/SETS OF ATT0023 PACKED TOGETHER. A SINGLE ATT0023 CORRESPONDS TO: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 75 x 197 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x ATT0023 PACKED TOGETHER: 380 x 300 x h197 mm - 28 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-206

Content consisting of various hand tools, suspension elements and other workshop accessories Auction-ID: A7-46287-201

4 UNITS/SETS OF ATT0023 PACKED TOGETHER. A SINGLE ATT0023 CORRESPONDS TO: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 75 x 197 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x ATT0023 PACKED TOGETHER: 380 x 300 x h197 mm - 28 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-4

Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 210 x 100 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-163

The oil sprayers 100 ml, 180 ml and 200 ml are ideal for precise dosing of oil during cooking, frying or grilling. Perfect for health-conscious cooks who want to use oil sparingly and purposefully. Modern, elegant design that fits into any kitchen. Fine spray mist for even distribution, easy cleaning The 400 ml pourer is perfect for storing and pouring cooking oil, vinegar, soy sauce or other liquids. Auction-ID: A1-46296-901

6 tool holders, brand Freutek, type HSK-63F-ER40, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 100 x 100 mm; Approx. Weight: 8kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-32

Suitable for: ER11 / ER16 / ER20 / ER25 / ER32 collets, analog adjustable torque, In plastic case. Auction-ID: A1-45979-50

Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 75 x 197 mm; Approx. Weight: 14kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-346

With extraction; Suction line to the valve Auction-ID: A1-43429-17

starts, drives and brakes smoothly - working air conditioning - tow bar - headlight right front defective, bodywork not damaged - slight body damage left flank - glue residue - driver's seat damaged - see dashboard notifications - cargo space striking signs of use march everything functional and immediately usable if headlight repaired Auction-ID: A3-43369-10894

1x Type G 13SE2 Angle Grinder, 1x Drill, 1x Type SAT-180 Polisher Auction-ID: A1-45979-209

4 UNITS/SETS OF ATT0024 PACKED TOGETHER. A SINGLE ATT0024 CORRESPONDS TO: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 75 x 197 mm; Approx. Weight: 14kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x ATT0024 PACKED TOGETHER: 380 x 300 x h197 mm - 56 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-220

Consisting of: various HSK A63 holders, collet holders, extensions and milling holders, including Haimer, Seco, EPB Auction-ID: A1-45979-15