british flag
Resale Logo

face to face used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information boilers  Maschinen-Metscher  http://www.maschinen-metscher.de 
banner logo
start page > keywords face to face > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465524 109

CHARMILLES ROBOFIL 310 for sale


Wire EDM CHARMILLES ROBOFIL 310 bearing no 1105-01232 category wire EDM machine make CHARMILLES ROBOFIL 310 type year 1994 State second-hand machine control CNC storage France country of origin Switzerland delivery immed ...
used machine
 
Wire EDM CHARMILLES ROBOFIL 310 bearing no 1105-01232 category wire EDM machine make CHARMILLES ROBOFIL 310 type year 1994 State second-hand machine control CNC storage France country of origin Switzerland delivery immediately Frachtba SIS EXW technical details table length 600 mm table width 400 mm amp 18 A - workspace-DRAHTERODIEREN-- traverse path X-axis 260 mm - travel Y-axis 400 mm - travel z (vertical) 400 mm table - on chip nfläche (left-right) 510 mm - clamping surface (front rear) 580 mm - workpiece weight (max) 200 kg wire SYSTEM - wire diameter (min) 0.03 mm - diameter (max) 0.3 mm electrical connection data - power consumption 10 kW - kVA power 15.7
-Power supply 380 V dimensions / weights 2.5 t - space length 3500 mm - space width 2500 mm description now free with all documents
and many accessories
1994
8,000 €  
    request
125460807 103

FORMAT UF 250 for sale


x-travel: 900 mmy-travel: 250 mmz-travel: 450 mmturning speed range - horizontal: 50 - 1700 U/minturning speed range - vertical: 50 - 1700 U/minmilling-head swivable +/-: 90° spindle taper ISO: 40 table surface area:  ...
used machine
 
x-travel: 900 mm
y-travel: 250 mm
z-travel: 450 mm
turning speed range - horizontal: 50 - 1700 U/min
turning speed range - vertical: 50 - 1700 U/min
milling-head swivable +/-: 90°
spindle taper ISO: 40
table surface area: 1250 x 250 mm
total power requirement: 4,2 kW
weight of the machine ca.: 1,5 t
dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m
? hydr. vise
? horizontal milling equipment (without steady) with 3 milling spindles


This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125465456 104

GRIT GU150ES2H for sale


- grindable pipe diameter up to 150mm - cross adjustment of support - adjustable depth stop - mitre grinding 30° to 90° - grinding belt dimensions 2000 x 150mm - surface grinding opening 300 x 150mm - contact pla ...
used machine
 
- grindable pipe diameter up to 150mm
- cross adjustment of support
- adjustable depth stop
- mitre grinding 30° to 90°
- grinding belt dimensions 2000 x 150mm
- surface grinding opening 300 x 150mm
- contact plate B 150 / D 200mm
- pulley B 150 / D 200mm
- grinding belt speeds 15 + 30m/min
- drive 400 V / 2.6 + 3,1kW

special equipment:
- pneumatic feeding accessory GU RA
- contact role 1 inch / 1 1/4 inch / 1 1/2 inch
- suction
2001
Price  
    request
125460809 103

KUNZMANN UF6N for sale


x-travel: 450 mmy-travel: 500 mmz-travel: 200 mmturning speed range - horizontal: 30 - 1280 U/minturning speed range - vertical: 50 - 2150 U/minmilling-head swivable +/-: 90° spindle taper ISO: 30 table surface area:  ...
used machine
 
x-travel: 450 mm
y-travel: 500 mm
z-travel: 200 mm
turning speed range - horizontal: 30 - 1280 U/min
turning speed range - vertical: 50 - 2150 U/min
milling-head swivable +/-: 90°
spindle taper ISO: 30
table surface area: 865 x 265 mm
total power requirement: 3 kW
weight of the machine ca.: 1,44 t
dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m
? hydr. vise
? horizontal milling equipment (without steady) with 3 milling spindles


This ad was created with MODUL MWS - the software solution of LogoTech.
1979
Price  
    request
125465382 101

DMG DECKEL MAHO DMC 50 V for sale


Machining center - vertical DECKEL MAHO DMC 50 V bearing no 1105-01865 category machining center - vertical make DECKEL-MAHO type DMC 50 V year 1995 State second-hand machine control CNC dialog 112 storage France country ...
used machine
 
Machining center - vertical DECKEL MAHO DMC 50 V bearing no 1105-01865 category machining center - vertical make DECKEL-MAHO type DMC 50 V year 1995 State second-hand machine control CNC dialog 112 storage France country of origin Germany
Delivery time immediately cargo base EX WORK technical details x way 500 mm y way 420 mm z trail 500 mm control dialog 112 table size 1 table: 700 x 400 mm speed range - milling power 0-15000 rpm tool holder SK 40 - Milling spindle 15 kW who kzeugwechsler - places: 30 stations feed range 1-10000 mm / min rapid traverse x and Y-axis 30 m / min rapid traverse Z axis 20 m/min total power 25 kW machine weight 7000 kg space requirement approx. 3400 x 3400 x 2900 mm accessories electronic hand wheel conveyors Centre ralschmierung RS 232 data interface coolant system complete machine documentation work light description with control dialog 112
BEAUTIFUL MACHINE

1995
13,000 €  
    request
125460795 102

DMG MORI CTX beta 1250 TC 4A for sale


turning diameter: max. 500 mmturning length: 1.250 mmcontrol: Sinumerik 840 D sl Siemensswing diameter: 500 mmdistance between spindles: 1.450 mmMain spindle:: turning speed range - main spindle: max. 5.000 min/-1power ...
used machine
 
turning diameter: max. 500 mm
turning length: 1.250 mm
control: Sinumerik 840 D sl Siemens
swing diameter: 500 mm
distance between spindles: 1.450 mm
Main spindle::
turning speed range - main spindle: max. 5.000 min/-1
power capacity - main spindel: 25 / 32 kW
max. Torque: 360 / 280 Nm
spindle head: 170h5
spindle bearing diameter: 130 mm
spindle bore: 77 mm
bar material dia.: 67 mm
usable bar diameter: 65 mm
C-Axis: 360 °
chucking diameter: max. 250 mm
tool magazin::
number of toolpositions: 24 pos.
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 120 mm
max. tool weight: 5 kg
max. tool length: 300 mm
Milling Spindle::
Speed Milling Spindle: max. 18.000 min/-1
power capacity - milling spindle: 22 kW
max. Torque: 100 Nm
tool taper: HSK 63 A
B-Axis: +/- 110 °
axis stroke::
x-axis: 1: 450 (-10) mm
z-axis: 1: 1.300 mm
y-axis: 1: +/- 100 mm
Subspindel::
Spindle speed range subspindle: max. 5.000 min/-1
power capacity - Sub spindle: 25 / 32 kW
bar material dia.: max. 65 mm
chucking diameter: max. 250 mm
C-Axis: 360 °
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40 TriFix
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity driven tool-stations: 11,3 / 28 kW
max. Torque: 7 Nm
switching time: 30°: 0,4 sec
axis stroke::
x-axis: 2: 195 mm
z-axis: 2: 1.200 mm
total power requirement: 70 kVA
weight of the machine ca.: 8,0 t
dimensions of the machine ca.: 4,0 x 2,5 x 2,5 m
Documents:
Chip conveyor:
Milling spindle:
Coolantsystem:
high pressure coolant: 20 bar
hydraulic system:
Automatic Tool Changer: 24 pos.
work light:
C-axis: 2x
B-axis:
Y-axis:
hollow chuck unit:
Subspindle:
direkt probing: X1 / Y1 / Z1 / X2
Parts removal:
Signal lamp - 4 colour:
bar feeder interface:
bar feeder: LNS SuperHyd. 6.50-6.68 4,4m
Tailstock function counter spindle:
steady-rest on turret: SMW - SLU2X / 8-101mm
5-Axis CNC - Turning- and Millingcenter
DMG MORI - CTX beta 1250 TC 4A

- Main- Sub- and Millingspindle
- lower turret
- Conrol: Siemens Sinumerik 840 D sl Ergoline / Shopturn 3G
- 5-Axis-Simultaneous-Machining
- Betriebsstunden: Strom-Ein: ca. 7.500h / Spindellauf: ca. 2.000h



This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125465357 103  

DECKEL FP 1 for sale


No. R 56716-08, with digital display for lateral axis. Clamping surface of the solid table 195 x 605 mm Table movement along autom. and hand 290/300 mm Table motion vertical machine. and hand 330/340 mm Spindle stock ...
used machine
 
No. R 56716-08, with digital display for lateral axis.
Clamping surface of the solid table 195 x 605 mm
Table movement along autom. and hand 290/300 mm
Table motion vertical machine. and hand 330/340 mm
Spindle stock Cross movement by hand 150 mm
Spindle carrier ISA 40
Spindle speeds from 40 to 2000 RPM.
Spindle drive 1/1.4 kW
Weight approx. 660 kg

Accessories: separate control cabinet.
 
Price  
    request
125460797 101

EMCO MC 1200 for sale


x-travel: 1.200 mmy-travel: 600 mmz-travel: 600 mmControl: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: 50 - 10.000 min/-1power capacity - main spindel: 25 kWmax. Torque: 70 Nmtool taper: SK 40 d ...
used machine
 
x-travel: 1.200 mm
y-travel: 600 mm
z-travel: 600 mm
Control: TNC 620 Heidenhain
Main spindle::
turning speed range - main spindle: 50 - 10.000 min/-1
power capacity - main spindel: 25 kW
max. Torque: 70 Nm
tool taper: SK 40
distance spindle nose and table: 120 - 720 mm
work table::
table surface area: 1.400 x 650 mm
number of T-slots: 5
T-slot - width: 18 H8 mm
tool magazin::
number of toolpositions: 30 pos.
tool taper: SK 40
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 125 mm
max. tool length: 280 mm
max. tool weight: 8,0 kg
max. total weight: 100 kg
tool changing time: 1,6 sec
feeds::
rapid traverse: 40 m/min
feed speeds: 20.000 mm/min
Accelaration: 5 m/s²
feed power: 5,8 kN
total power requirement: 35 kVA
weight of the machine ca.: 7,7 t
dimensions of the machine ca.: 5,0 x 4,0 x 3,2 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 30 bar
through spindle coolant:
paper band filter:
interface 4. axis:
4. axis: defekt / defect
Automatic Tool Changer:
elektr. hand wheel:
CNC - Machiningcenter Vertical
EMCO - MC 1200

- only ca. 4.900h Spindle-Runtime



This ad was created with MODUL MWS - the software solution of LogoTech.
2011
Price  
    request
125465301 203

WEINIG U17A for sale
Vierseitenhobelmaschinen


MULTISPINDLE MACHINE Type WEINIG U17A indipendent motors for each planing spindle composed by 6 Spindles : 1) Surface planer 2) Moulder ( right ) 3) Moulder ( left ) 4) Moulder ( right ) 5) Thickness Planer 6) Un ...

 
MULTISPINDLE MACHINE Type WEINIG U17A
indipendent motors for each planing spindle
composed by 6 Spindles :
1) Surface planer
2) Moulder ( right )
3) Moulder ( left )
4) Moulder ( right )
5) Thickness Planer
6) Universal shaft 360°
- max. working width mm. 170
- max. working heigth mm. 120
- length of entry table mm. 1800
- Lift of infeed unit motor Hp 0,5
- Feed speed from 6 to 22 mt./min
- Spindle rotations of working heads rpm. 6000
- Spindle diameter of working heads mm. 40
- Infeed unit with pneumatic pressure
- Table lubrification
- Volt. 380/50
 
Price  
  IT   request
125460744 103

ERNAULT-SOMUA Z 1 C for sale


x-travel: 710 mmy-travel: 220 mmz-travel: 400 mmtable surface area: 1200 x 300 mmspindle turning speed range: 40 - 2000 U/minspindle drive: 2,3 kWtool taper: 40 SKtotal power requirement: 5,0 kWweight of the machine ca.: ...
used machine
 
x-travel: 710 mm
y-travel: 220 mm
z-travel: 400 mm
table surface area: 1200 x 300 mm
spindle turning speed range: 40 - 2000 U/min
spindle drive: 2,3 kW
tool taper: 40 SK
total power requirement: 5,0 kW
weight of the machine ca.: 1370 kg.
dimensions of the machine ca.: 1,5 x 1,2 x 1,4 m




This ad was created with MODUL MWS - the software solution of LogoTech.
1988
Price  
    request
125452409 101

DMG DECKEL MAHO DMU 50 for sale


Machining center - universal lid MAHO DMG DMU 50 5-axis 3 + 2 bearing no 1105-00660 category machining center - universal make lid MAHO DMG type DMU 50 5-axis 3 + 2 year 2005 State second-hand machine control CNC HEIDENH ...
used machine
 
Machining center - universal lid MAHO DMG DMU 50 5-axis 3 + 2 bearing no 1105-00660 category machining center - universal make lid MAHO DMG type DMU 50 5-axis 3 + 2 year 2005 State second-hand machine control CNC HEIDENHAIN ITNC 530
Storage location France country of origin Germany delivery immediately cargo base EX WORK technical details x way 500 mm y way 420 mm z-way 380 mm control HEIDENHAIN ITNC 530
Recording SK 40 10000 rpm 1/min table surface 500 X 380 MM mm description HEINDENHAIN ITNC 530
Controlled NC round swivel table, 2 axle coolant system,
Full cabin,
10000 RPM
Magazine 16 professional SK 40

2005
55,000 €  
    request
125460762 103

MIKRON VD 500 D for sale


x-travel: 500 mm längsy-travel: 400 mm querz-travel: 400 mm senkrechttable surface area: 900 x 400 mmspindle taper ISO: 40 SKturning speeds: 30 - 3.500 U/mintotal power requirement: 10,0 KWweight of the machine ca.: 4.0 ...
used machine
 
x-travel: 500 mm längs
y-travel: 400 mm quer
z-travel: 400 mm senkrecht
table surface area: 900 x 400 mm
spindle taper ISO: 40 SK
turning speeds: 30 - 3.500 U/min
total power requirement: 10,0 KW
weight of the machine ca.: 4.000 kg.
dimensions of the machine ca.: 2.470 x 2.550 x 2.300 mm LxBxH
CNC-continiuos-path control PHILIPS 432
div. tool holding fixtures,



This ad was created with MODUL MWS - the software solution of LogoTech.
1990
4,750 €  
    request
125452364 107

SCHNUTZ RMH 18/40/23-2000 Z for sale


Yield strength (0.2) Max/tensile strength (0.2) Max: 400 N / mm² Band thickness/strip thickness: (0.3)... 0.4... 2.0 mm Setting rollers number/no. of straightening rolls: 23 St. / no. Reel diameter/dia.of  ...
used machine
 
Yield strength (0.2) Max/tensile strength (0.2) Max: 400 N / mm²
Band thickness/strip thickness: (0.3)... 0.4... 2.0 mm
Setting rollers number/no. of straightening rolls: 23 St. / no.
Reel diameter/dia.of straightening rolls: 40 mm
Bale length setting rollers/body length straightening rolls: 2,235 mm
Number of intermediate rollers / no. of intermediated-rolls: 25 PCs / no.
Bale length intermediate rolls / body length intermediated rolls: 2,140 mm
In outriggers, hydr. adjustable/lower support hydr. adjustable: 9 St. / no.
Upper braces fix. / upper support fix.: 9 St. / no.
Number of track rollers/no. support of rolls: 243 St. / no.
Support rollers diameter/slide. support of rolls: 41 mm
Bale length support rollers/body length support rolls: 128 mm
Speed Max / max speed: 60m / min
Total weight/complete weigth: 13.2000 kg

High-band straightening machine / high production-strip leveling machine
Machine without electrical / machine withourt electric material:
Cold-rolled steel, varnished, plastic-coated, electrolytic and hot-dip galvanized
Surface, aluminium / CU / Zn/stainless steel / /.
steel cold rolled, painted, PVC-coated, galvanised surface, Al / Cu / Zn/inox
2002
Price  
    request
125460509 1900

NESTRO NE 300 P for sale


Weight approx.: 900 kgDimensions (l x w x h) approx.: 1400 x 4000 x 2400 mmDescription: V = 5083 m³ / h, filter surface 33.25 m², negative pressure 2540 Pa, motor power 7.5 kW, rated speed 2800 rpm, exhaust nozzle 300  ...
used machine
 
Weight approx.: 900 kg
Dimensions (l x w x h) approx.: 1400 x 4000 x 2400 mm
Description: V = 5083 m³ / h, filter surface 33.25 m², negative pressure 2540 Pa, motor power 7.5 kW, rated speed 2800 rpm, exhaust nozzle 300 mm. Piping approx. 4000 mm included, pneumatic filter regeneration
2013
used machinery auction RESALE 3,500 €  
  CH   request
125452359 106

URPEMAK URPE CC 50 for sale


Aluminum injection molding machine URPEMAK URPE CC 50 was built in 2005 in Spain. URPEMAK URPE CC 50 casting machine - characteristic parameters: - closing force: 500 kN - closing distance: 260 mm - ejector force:  ...
used machine
 
Aluminum injection molding machine URPEMAK URPE CC 50 was built in 2005 in Spain.

URPEMAK URPE CC 50 casting machine - characteristic parameters:
- closing force: 500 kN
- closing distance: 260 mm
- ejector force: 62.8 kN
- ejector stroke: 50 mm
- mold height (min-max): 100/325 mm
- dimensions of plates: 500 x 500 mm
- distance between columns: 320 x 290 mm
- column diameter: 60 mm
- injection position: 0-50 mm
- maximum casting force: 50 kN
- Injection piston diameter: 45-50-55 mm
- casting feed: 140 mm
- casting surface: 159-196-238 cm2
- injection mass / volume: 91-140-188 cm3
- injection pressure: 314-254-210 daN / cm2
- piston feed: 150 mm
- engine: 11 kW
- weight: 4900 kg
- dimensions: approx. 407 x 225 x 220 cm
2005
22,475 €  
  PL   request
125460525 1900


Weight approx.: 400 kgDimensions (l x w x h) approx.: 3050 x 850 x 800 mmDescription: Self-construction, plate thickness approx. 35 mm, feet firmly welded, see photos for details

 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 3050 x 850 x 800 mm
Description: Self-construction, plate thickness approx. 35 mm, feet firmly welded, see photos for details
 
used machinery auction RESALE 65 €  
  DE   request
125452353 106

URPEMAK URPE CFA 220 for sale


Casting machine URPEMAK URPE CFA 220 was manufactured in 2005 in Spain. In the price of the machine, an aluminum melt crucible with a capacity of approx. 500 l, visible in the last picture. Injection molding machine U ...
used machine
 
Casting machine URPEMAK URPE CFA 220 was manufactured in 2005 in Spain. In the price of the machine, an aluminum melt crucible with a capacity of approx. 500 l, visible in the last picture.

Injection molding machine URPAKAK URPE CFA 220 - technical parameters:
- closing force: 2250 kN
- closing distance: 440 mm
- ejector force: 120 kN
- ejector stroke: 100 mm
- mold height (min-max): 240/600 mm
- dimensions of the panels: 780 x 780 mm
- distance between columns: 510 x 510 mm
- column diameter: 90 mm
- injection position: 0-90-180 mm
- maximum casting force: 121-250 kN
- Injection piston diameter: 40-50-60-70 mm
- casting feed: 360 mm
- casting surface: 113-714 cm2
- injection mass / volume: 301-471-678-923 cm3
- injection pressure: 315-1990 daN / cm2
- engine: 20 kW
- weight: 13000 kg
- dimensions: approx. 590 x 238 x 275 cm
2005
37,475 €  
  PL   request
125460543 1900


Weight approx.: 450 kgDimensions (l x w x h) approx.: 2000 x 1500 x 1100 mmDescription: 2 pcs., 1 x work surface 2000 x 740 mm, with vice, jaw width 125 mm, 1 x work surface 1900 x 700 mm, with mounted vice, jaw width 14 ...

 
Weight approx.: 450 kg
Dimensions (l x w x h) approx.: 2000 x 1500 x 1100 mm
Description: 2 pcs., 1 x work surface 2000 x 740 mm, with vice, jaw width 125 mm, 1 x work surface 1900 x 700 mm, with mounted vice, jaw width 140 mm, contents: bracket, shackles in different sizes, see photos for details
 
used machinery auction RESALE 105 €  
  DE   request
125452338 103

TOS FMA-U for sale


Table clamping surface: 1400 x 800 mm Number of table grooves 8 Spindle axis distance from the column guide: 1000 mm Manual and machine spindle setting: 250 mm Spindle pitch 90 ° - 0 ° - 45 ° Spindle speed:  ...
used machine
 
Table clamping surface: 1400 x 800 mm
Number of table grooves 8
Spindle axis distance from the column guide: 1000 mm
Manual and machine spindle setting: 250 mm
Spindle pitch 90 ° - 0 ° - 45 °
Spindle speed: -1400 rpm
Spindle end distance from the table - min. 40 mm - maximum 1160 mm
Electric motor for spindle drive - power 2.2 / 3 kW
Machine weight: 4200 kg
An additional table (on which can be cut to a diameter of 5m)
1980
Price  
    request
125460568 109


Weight approx.: 300 kgDimensions (l x w x h) approx.: 800 x 600 x 400 mmDescription: Diameter approx. 520 x 200 mm, T-slot pitch approx. 175 mm, travel 170 mm, for further details see photos

 
Weight approx.: 300 kg
Dimensions (l x w x h) approx.: 800 x 600 x 400 mm
Description: Diameter approx. 520 x 200 mm, T-slot pitch approx. 175 mm, travel 170 mm, for further details see photos
 
used machinery auction RESALE 120 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Casting press URPEMAK URPE CFA 330


Injection molding machine for aluminium URPEMAK URPE CFA 330 manufactured in 2008 year in Spain. The price of the machine is the crucible to melt zinc, with a capacity of approx. 400 l, visible on the last photo. Foundry machine URPE URPEMAK CFA 330-technical data: -clamping force: 3300 kN -road closure: 510 mm -the strength of the ejector: 181 kN -ejector stroke: 120 mm -height (min-max): 300/700 mm -dimensions: 910 x 910 mm -distance between columns: 572 x 572 mm -diameter: 115 mm -the position of the injection: 0-80-160 mm -the maximum force-cast: 155-350 kN -piston injection: 50-60-70-80 mm -feed cast: 445 mm -the surface of the casting: 170-1089 cm2 the mass/volume of injection: 655-943-1294-1677 cm3 -injection pressure: 308-1782 daN/cm2 -engine: 33 kW -weight: 16000 kg -machine dimensions: 700 x 270 x 290 cm

Horizontal Machining Center SCHARMANN Ecocut 1.3


X-travel: 2200mm, y-travel: 1600mm, z-travel: 1400mm, max. table load: 5t, quill diameter: 125mm, clamping surface: 4x 1000x1200mm, 2x 1250x1600mm, drive power: 30kW, with pallet changer.

Universal Machining Center BURKHARDT WEBER MC 120 HV


X-travel: 1600mm, y-travel: 1250mm, z-travel: 1250mm, B-travel: 360°, max. table load: 5t, clamping surface: 2x 1000x800mm, with pallet changer.

Horizontal Milling Machine BURKHARDT WEBER MC 80


X-travel: 1600mm, y-travel: 1000mm, z-travel: 800mm, B-travel: 360°, max. table load: 3t, drive power: 20kW, clamping surface: 2x 800x800mm, with pallet changer.

Vertical Machining Center WERNER PFZ 1500


X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.

Jig Boring Machine SIP HAUSER MP-54


X-travel: 650mm, y-travel: 450mm, z-travel: 500mm, clamping surface: 770x630mm, max. table load: 500kg, drilling spindle stroke: 160mm, drive power: 5kW.

Rotary Table Surface Grinding Machine ELB SWR 150 T


Magnetic clamping surface diameter: 1500mm.

Surface Grinding Machine BLOHM HFS 512


Grinding length: 800mm, grinding width: 400mm, workpiece height: 300mm, magnetic clamping plate dimensions: 1200x500mm, table adjustment longitudinal/ cross: 1200/ 260mm, table speed: 2-300m/min, length: 4200mm, width: 2000mm, height: 2400mm, weight: 6.3t.

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Coordinate Measuring Machine DEA JOTA 1203


X-travel: 1300mm, y-travel: 1000mm, z-travel: 800mm, clamping surface: 2200x1100mm.

Coordinate Measuring Machine ZEISS 850 CAA


X-travel: 850mm, y-travel: 1200mm, z-travel: 600mm, clamping surface: 2100x1000mm.

CNC Lathe MONFORTS RNC 500 MultiTurn


Clamping surface diameter: 356mm, turning length: 1000mm, swing over bed/ cross slide: 600/ 425mm, internal draw tube diameter: 86mm, number of tool stations: 12, max. rotational speed: 4000/min.

Universal 5-Axis Machining Center MIKRON VCP/ UCP 710


X-travel: 700mm, y-travel: 600mm, z-travel: 400mm, clamping surface: 630x630mm, control: HEIDENHAIN TNC 430, length: 3400mm, width: 3500mm, height: 3500mm, weight: 10.5t.

Horizontal Band Saw MEBA 407 A


Clamping surface diameter: 390mm, saw band length: 5120mm, cutting speed: 15-150m/min, clamping height: 10-407mm, clamping width: 10-407mm, cutting range: 407x407mm, cutting range round: 407mm, lowering speed: 0-300mm/min, length: 1400mm, width: 2500mm, height: 2000mm, weight: 3.5t.

Machining Center HELLER BEA 07


X-travel: 630mm, y-travel: 500mm, z-travel: 550mm, feed rate: 1-10000mm/min, rapid traverse: 12000mm/min, tool magazine slots: 40, NC round table: 400x400mm, pallet clamping surface: 400x500mm, control: uni-Pro NC 80-c.

Horizontal boring machine TOS H100 A


X - the table is transversal, 1250 mm Y - spindle turret upright, 1000 mm Z - table longitudinally, 1250 mm W - spindle extension, 900 mm Spindle diameter, 100 mm Morse spindle cone execution 6 Power of the drive of the main motion, 7,5 kW Working surface of the table, 1250x1250 mm Capacity of the table, 3000 kg The speed of rotation of the flatbed, 0.8 ... 800 rpm Overall dimensions of the machine (LxBxH), 6000 x 3700 x 3000 mm Total machine weight 13500 kg

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Refrigerating machines Eco refrigerazione IDE 43B10 ED


Description Eco Brand Refrigerazione IDE 43B10 model ED ID 555804 Status Active Price €2,000 + VAT Year of manufacture 2007 Location Bucharest, Romania/Bucharest (RO) Dual discharge industrial unit coolers Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum air flow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (ext./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: 35oC. ExWorks. Price is negotiable. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Technical inspection can be organized at least 24 hrs before the due dates We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

Eccentric Presses SMERAL TRNAVA LEN 40 C


Eccentric press SMERAL PRESSES OFFERING TRNAVA LEN 40 C produced in 1985 year in Czechoslovakia. Press-specific data LEN 40 c: -pressure: 40 tons -table surface: 660 x 530 mm -the surface of the slider: 400 x 250 mm -outreach: 265 mm -the distance between the table and the slider: 295 mm -the size of the adjustment between the table and the slider: 80 mm -the number of jumps the slider with continuous movement: 70 or the 142 ppm -number of jumping individual: 50/min -adjustable pitch slider: 8-95 mm -pneumatic coupling, min. air pressure: 0.4 MPa -motor power: 3/4 kW -overall dimensions (l x w x h): 1585 x 1245 x 2370 mm -weight: 4500 kg

Eccentric Presses FPA PMS 63 CP


Eccentric press FPA PMS 63 CP produced in 1983 by the Warsaw Factory Machines. FPA press parameters PMS 63 CP: -maximum load: 63 tons -size disc table: 800 x 560 mm -outreach, the table height: 280 mm -adjustable pitch slider: 8-110 mm -diving slider: 65, 85, 110 strokes/min. -maximum number of inclusions in the clutch to intermittent traffic: 20 on/min. -the largest distance slider from the table: 315 mm -the diameter of the hole in the table: 250/280 mm -the self-alignment capacity of slider in the direction of the axis: 90 mm -thickness: 90 mm -hole diameter: 140 mm -slider surface dimensions: 350 x 315 mm -the diameter of the hole in the slider: 40 mm -the ground clearance between the walls of the body: 380 mm -the width of the t-slots: 22 mm -air pressure: 4.5 at -the engine speed: 1500 rpm. -engine power: 5.5 kW -dimensions (l x w x h): 1550 x 1400 x 2650 mm-weight: ok. 6200 kg -an intermediate table -foot pedal -DTR-technical-functional

Radial Drilling Machines WRS 25/08


Radial drilling machine WRS 25 produced in 1992. WRS drills specific data 25/08: -the size of the work surface: 660 x 360 mm -the size of the work surface: 860 x 560 mm -dimensions: 1400 x 700 mm -drilling capacity in steel: 25 mm -drilling in cast iron: 30 mm -spindle speed: 65-2880 RPM -the largest travel: 160 mm -the number of feed motor spindle: 6 -distance between the spindle from the table: 10-500 mm -distance between the spindle from the Base: 780-940 mm -radial drilling range: 315-815 mm -motor power: 3 KW -Cone Morsea: MK3 -dimensions (l x w x h): 1460 x 700 x 2300 mm -weight: 1100 kg

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)

CNC Milling Machines Elumatec 2009


Profile machining centre SBZ 130 eluCam Description 3-axis profile machining centre Designed for economical and efficient machining of aluminium, steel and stainless steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces The on-board turret head ensures that tool changing times are kept very short, thereby optimising machining cycles The turret head can be equipped with eight tools or angle routing heads Automatic clamping adjustment enables the machine to position the material clamps 3-axis controller The tool spindle is designed as an additional axis Network connection Technical specifications Traverse path X-axis, 4,200 mm, 7,200 mm, 8,500 mm, 10,200 mm, 11,500 mm (additional lengths on request) Vmax. 60 m/min. Traverse path Y-axis, 485 mm, Vmax. 30 m/min. Traverse path Z-axis, 340 mm, Vmax. 30 m/min. Max. spindle speed 6,000 rpm, 18,000 rpm with high-speed spindle Spindle power output 5.5 kW Tool changer for eight tools on a turret head Compressed air supply 7 bar Power supply 400 V, 3~, 50 Hz, 35 A Air consumption per minute 100 l with spraying Machining length SBZ 130 – 7.2 m Max. machining length with profile end machining, 7,080 mm Max. machining length without profile end machining, 7,200 mm

Elumatec 2011


Profile machining centre SBZ 140 Description 4-axis profile machining centre Designed for economical and efficient machining of aluminium and thin-walled steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces Machining with all tools at angles continuously adjustable from 0° - 180° The on-board tool magazine ensures that tool changing times are kept short, thereby optimising machining cycles The magazine can be equipped with eight tools A rotating angle head with two different tools is available for double-bar and end machining (0°?-?90°?-?180°?-?270°) (option) Two separate working zones enable machining in shuttle operation (option) 4-axis controller 15" colour display, USB ports and network connection Windows operating system Technical specifications Traverse path X-axis, 4,200 mm, 6,400 mm, 7,600 mm, 9,700 mm (additional lengths on request) Vmax. 65 m/min. Traverse path Y-axis, 850 mm, Vmax. 60 m/min. Traverse path Z-axis, 650 mm, Vmax. 60 m/min. Pivoting angle A-axis, 0° - 180°; freely programmable in 1/10° steps Max. spindle speed 24,000 rpm Spindle power output 11 kW, S1 Tool changer for eight tools, additional tool positions on request Compressed air supply 7 bar Power supply 400 V, 3~, 50 Hz, 63 A Air consumption per minute 180 l with spraying Machining length SBZ 140 - 9.7 m Max. machining length with profile end machining, 9,580 mm Max. machining length without profile end machining, 9,700 mm MACHINE IS PERFECT CONDITION. SET UP TIME IS END OF 2012. NOT USED SO MUCH AND FULL FUNTIONALITY.

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

H-Frame Crank Presses PKrR 200/2


Crank press PKrR framework 200/2 pressure 200 tons was built in 1971 by Zamech-. Technical data of the press PKrR 200/2: -nominal pressure: 200 ton-clearance between uprights: 2000 mm-pitch slider: 200 mm-number of jumps: 23, 27, 32 l/min. -distance from the table slider closed (closed is the distance slider from the table in the lower turning position and first engages a): 630 mm-nastwano?? slider: 150 mm-length: 1000 mm-length slider: 900 mm-hole in the table: 1600 x 600 mm-gr ubo??: interface plate 150 mm-width Windows in the rack: 400 mm-the air pressure in the clutch: 3 atn. -odci??aczach air pressure: 5 bar -intake air when jumping individual: 0.035 Nm3/sk. -maximum number of inclusions in the clutch to intermittent traffic: 12 l/min. -main motor power: 22 kW-RPM main motor: 1500 l/min. -engine power to set the slider: 3 kW-engine speed to set the slider: 1500 l/min. -string device, wypych.: 10 t-string device, the power of przytrz: 40 t-string, stroke: 125 mm -maximum air pressure in the device pass design: 6 atn. -the weight of the tool ci?gowego: 2020 kG -the weight of the press without pads: 30580 kG -overall dimensions of the machine (w x l x h): 3100 x 2150 x 5600 mm

Transfer Presses ( 2 - 4 Columns) KRUPP PST-A 160


Transfer press KRUPP PST-and 160 built in 1980. Technical data of the press KRUPP PST-and 160: -nominal pressure: 160 tons -cutting force degree 1:400 KN -clamping force between uprights: 1200 KN -the number of stages including the cutting level: 11 -the distance between uprights: 200 mm -pitch slider: 210 mm -drawing depth: 70 mm -the amount of jumping, infinitely adjustable: 15-75/min. -production range jumping from repeatability of its settings: 25-75/min. -number of jumping motion Setup: 15-25/min. -wykorzystywalny resource work per stroke in terms of 25-75 strokes per min.: 20000 J -maximum load single degree: 500 KN -the maximum load of a single degree by using the inserts: 630 KN -the maximum tape width: ok. 340 mm -the maximum cut-out diameter: 120 mm -the minimum cut-out diameter: 30 mm -the distance between uprights: 2450 mm -the height of the built-in tools in the lower position of the slider and its regulations (the space between the table and the imakami of the upper toolbar): 470 mm -the height of the surface transport extrusions over a dining table: 270 mm -height adjustment tool blocks: 40 mm -table clamping surface (width x depth): 2000 x 700 mm -adjustable spacing between the slats podajacymi: 210 +-300 mm -stroke closing slats which indicate for each terminal: 75 mm The progressive press wielooperacyjna KRUPP PST-and 160/11/200/210 is connected and can be checked on the move.

Welding Machines ECKERT CNC JANTAR 2


Plasma cutter CNC ECKERT JANTAR 2 was produced in 2010 year. The parameters characteristic of the cutter ECKERT JANTAR 2: -CNC: CNC ECS 872 -Source: Hypertherm HPR130A XD -the number of operating hours: ok. rbh 3590 and 326701m -table surface: 2000 x 3000 mm -range of track (length x width): 4200 x 3000 mm (2 x 3 rectangle designates the torch – this is exactly the movement) -the thickness of the cutting quality: 20 mm for the current 130 and -the thickness of the cutting quality: 12 mm for the current 80 and

Universal Lathes Up To 800 Mm Diameter Poreba TCA-1600/6000


The device is used for machining the outer, inner and front surfaces of rotary components of larger shaft and flange diameters, threading. POREBA - TCA 160/6000 - 1962 - d1600/6000 - 2-3 steadies

Eccentric Presses KOSICE LE 160 C


Eccentric press KOSICE LE 160 C was produced in 1981 year in Czechoslovakia by ZTS Kosice. Technical parameters of the KOSICE LE 160 c: -nominal pressure: 160 t -outreach: 355 mm -the self-alignment capacity of slider: 100 mm -adjustable stroke: 20-120 mm -distance slider from the table: 450 mm -the thickness of the intermediate plate: 100 mm -table surface: 995 x 700 mm -hole in the disc table: 290 H8 mm -the number of strokes per minute (continuous operation): 50 -hole in the slider: 50 H8 mm -air consumption: 0.5 Mpa, 28 litres/cycle -demand for power: 11 kW -overall dimensions: (l x w x h): 2310 x 1270 x 2587 mm -weight: kg 10150

Universal grinding machines KOMMUNAR 3Y131 (3U131)


Universal grinder for shafts and bores KOMMUNAR 3Y131 (3U131) produced in 1977 year in the Soviet Union. The machine is designed for external and internal grinding of cylindrical surface, and the surface of the flat flange, conical shaped. Grinder allows external grinding machines with automatic grinding wheel, on the headland of the table or a hand-fed and sanding with manual feed. Universal 3Y131 Sanders-specific data: -the maximum diameter of workpiece: 280 mm -maximum length of workpiece: 710 mm -the maximum diameter of workpiece in podtrzymce: 60 mm -height of tusks: 185 mm -maximum weight of workpiece: 55 kg -the largest grinding wheel diameter: 600 mm -rotation speed spindle grinding wheel diameter: 600 Prov 1111 Rev/min -the maximum angle of rotation of the spindle head: 30 degrees -the maximum diameter of the cut: 100 mm -maximum length of cut: 125 mm -spindle speed: 16900 RPM. -the size of the sanding spindle head stroke after bolt: 290 mm -time supply fast grinding wheel: 2 s -the size of the feeding speed, spindle head szlifirskiego from hydraulic drive: 50 mm -feed for one turn of the wheel: 0.5 mm -the value of the plot of limbusa feed precision: 0.001 mm -the value of the parcel for the diameter transverse feed limbusa: 0.005 mm -periodic feed grinding spindle head (headland of the table): 0,0025 – 0,025 mm -fast speed adjusting sanding spindle head: 240 mm/min -the amount of speed of rotation of the product: smooth, bezskokowa speed control -speed range: 40-327 RPM -angle of rotation: 0-90 degrees -dimensions of centres: SM4 -the weight of the grinder with accessories: 6200 kg -size grinding machines (at the extreme position of the moving parts): 5620 x 2585 x 1982 mm

Injection molding machines BMB BMB MC 350 Ton.


BMB MC 350 Ton. Injection molding Construction year 2001 DbB 900×630 mm. Screw diameter 70 mm. Calculated injection volume 1300 cm3 Moving plane stroke 850 Min / max mould thickness 200×800 Euromap 2200/350 Control Siemens siject op37 2 Jacks N.2 air spray Euromap Robot Interface 12 Accumulators 8 hot chambers Magnetic plates brand Tecnomagnete Machine certified for good conditions Can be seen running with Client’s mould, previous appointment

Injection molding machines BMB MC 150 T


BMB MC 150 Construction year 1999 150 Ton. Passage 460×420 columns Diameter of the screw 50 Calculated injection volume 370 Thickness min / max mold 120/420 mm Euromap robot interface 12 2 Jacks Moving plane travel 300 Control elsy 3 2 puffs of air 2 accumulators

CNC Punching Machines AMADA PEGA 357


OVERVIEW: Brand: AMADA Model: PEGA 357 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1993 Production hours: 48600 Location: India Origin country: Japan GENERAL DATA: Measurements width: 3770 mm Measurements depth: 4931 mm Measurements height: 2315 mm Machine weight: 11600 kg MAIN DRIVE: Punching force: 300 kN Maximum sheet thickness: 4 mm CONTROL UNIT: Brand: AMADAN Model: 04PC Interface: RS232 MOVEMENT: X-AXIS: Movement: 1830 mm Y-AXIS: Movement: 1270 mm MAX MATERIAL THICKNESS: Steel: 4 mm Stainless steel: 2 mm Aluminium: 5 mm TOOLS: No. of stations: 45 Max. tool diameter: 114,3 mm No. of index: 4 MEDIA: Main electronic connection: 400 V / 50 Hz Power consumption: 18 kVA Air pressure: 6 bar Lubrication tank: 1 L Oil tank: 80 L ADDITIONAL EQUIPMENT: 1 - 30x tools 2 - Stabilizer

Table Drilling Machine PBR


X-travel: 1500-2000mm, y-travel: 1200-1500mm, z-travel: 500mm, w-travel: 1500mm, drilling spindle diameter: 110mm, taper: ISO 50, milling spindle diameter: 160mm, milling cutter housing diameter: 44-221mm, table surface: 1000x1250mm, rapid traverse: 8000mm/min, tabel load: 4t, tool slots: 50-60, max. workpiece weigth: 45kg, max. tool length: 500mm, tool changer defective.

One-sided edgebander Jaroma DCKG JAROMA DCKG


UNIVERSAL JAROMA DCKG edbander WITH PREMILLS Jarome producer Model / machine type DCKG Year of production 2007 Machine category. One-sided edgebander Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments The GCKG edgebander is designed for unilateral banding of narrow furniture elements. In addition, the edge bander allows you to perform basic machining operations such as: - cutting off the periphery at the front and the back of the element AND THE PRELIMINARY MILLING OF THE FIRST TWO CUTTING STATION - milling excess edging height - removal of the corrugated surface created during milling (scraping) of the edges of PVC and ABS - milling (rounding) corners - smoothing (polishing) the machined edges The natural and plastic edgings that can be used for processing include: standotron, veneer, PVC / ABS tape with a maximum thickness of 3 mm, wood elements with a maximum thickness of 5 mm (when machining wood attachments, cutters are not used to round the corners) .

CNC Punching Machines Trumpf Trumatic 2000 R


OVERVIEW: Brand: Trumpf Model: Trumatic 2000 R Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2001 Production hours: 48600 Location: India Origin country: Germany GENERAL DATA: Measurements width: 2800 mm Measurements depth: 5500 mm Measurements height: 2200 mm Machine weight: 9200 kg MAIN DRIVE: Punching force: 180 kN Maximum sheet thickness: 4 mm CONTROL UNIT: Brand: Bosch Interface: RS232 MOVEMENT: X-AXIS: Movement: 1250 mm Y-AXIS: Movement: 1250 mm MAX MATERIAL THICKNESS: Steel: 4 mm Stainless steel: 2 mm Aluminium: 5 mm TOOLS: No. of stations: 10 Max. tool diameter: 76 mm No. of index: 10 MEDIA: Main electronic connection: 400V/50 Hz Power consumption: 17 kVA Air pressure: 7 bar ADDITIONAL EQUIPMENT: 1 - 10x tools

Tool Milling Machine PECKERMANN Kombi 1300


Max. spindle clamping surface distance: 450mm, x-travel: 1115mm, y-travel: 400mm, z-travel: 430mm, swivelling range: 90°, spindle bore: 27mm, clamping surface: 1500x560mm, number of T-grooves: 7, T-groove width: 18mm, T-groove distance: 70mm.

PLATE x1500 POLI


Type: surface plate Technical features: 3000 x 1500 mm. Quantity: 1 Weight: 3000 Kg. Notes: # 6 support columns and leveling

Homogeniser Mixer Berents Becomix RW 320


Berents Becomix RW320 Universal Homogeniser Mixer for the production of cosmetics and pharmaceutical products, such as cosmetic creams, pharmaceutical creams, tooth paste, gel products, mascara, make?up etc. Nominal 300 litre batch size, suitable for up to 133.5°C product temperature, with pressure from +2 to -1 bar, jacketed for heating and cooling, scraped surface anchor stirrer with 10.5 kW drive, bottom entry emulsifier, and external circulation system.

Surface Grinding Machine WMW SFW 315x1500


Swing: 315mm, center height: 165mm, center distance: 1500mm, max. workpiece weight: 300kg, table feed: 0.05-5m/min, rotational speed: 1340-1675/min, power: 7.5kW, length: 4960mm, width: 2000mm, height: 1500mm, weigth: 3.2t.

SACHMAN MX 1200 TNC 425


Technical data X travel mm.16000 Y travel mm. 1200 Z travel mm.2000 Spindle speed: RPM.4000 Autom.head KOSMO : 2,5°x2,5° Clamping surface: mt.1.1 x 18mt Data must be verify Standard equipment CNC HEIDENHIAN TNC 425 N.2 chip conveyor Auotm.tools changer 40 pos. Electronic handwheel N.3 Cubes: 5mt x 1,5 x 1,1H (each) N.5 Angle plates: H.2,5mt x 0,96mt x 1,2mt (each)

Vertikal Turning Machines (Lathes) Sedin TKV 525


Make: Sedin Model: TKV 525 Year: 2014 Condition: Used Machine type: Mill Location of machine: Poland Control: CNC Siemens Sinumeric Service details: Full History Documentation / manuals included? Yes Is tooling / spares included? Yes Is the equipment viewable under power? Yes Machine Details CNC Double Column Vertical Lathe GORBREX model TKV525 ( built on the corp of SEDIN Lathe ) Manufacturer: GORBREX – Poland Model: TKV525 New in: January 01/2014 Condition : very good, under power Control: SIEMENS Sienumeric 840D Delivery time: immediately This VTL was built by our company in 2014 for our customers. At that moment he lost his job for this machine. That is why he wants to sell this machine. The machine was increased by the execution of cast iron carried out. Technical details : Table diameter: 2250 mm Distance between table and ram 0 - 1780 mm Distance between table and lower surface of transversal beam 400 - 2140 mm Workpiece : Max workpiece diameter 2500 mm Max workpiece high 2200 mm !!!! Max workpiece weight 16 000 kg Carriage : Max ram travel 1200 mm Max horizontal travel of carriage 1390 mm Max swivel angle manual +/-30 degrees Max distance between axis of ram 560 mm Max knife intersection 40 x 60 mm Seat diameter ( metric cone ) 80 mm Mechanical unit : Carriages number and type 2 vertical – ram (one is cnc controlled, second is conventional) Table speeds range 0-110 rpm Rapid feeds of carriage 10 - 1780 mm/min Transversal beam feeding 360 mm/min Motors and overall dimensions: Main motor 55 kW , Dimensions 5065 x 5480 x 4910 mm Machine weight 36 000 kg Collect-Deliver-Install Remove the stress & worry of collecting, installing and maintaining your machine. Not just a collection service, features can include... Decommission (pre-owned) Load & deliver to buyer's site Unload and site to install position Fully commission machine 1, 2 or 3 year parts and labour warranty (new) Full PUWER assessment 24 or 48 hour on site response Annual maintenance services Banked hours for all your CNC equipment

SCHULER ES 400


Mechanical Press SCHULER ES2 400 T Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1978 Condition: working. Press capacity 400 T Slide stroke 610 mm slide adjustment 305 mm Die Height 1018 mm bolster size 2743 x 1524 mm number of strokes 20 SPM required power 82 kW table height over floor 400 mm Die cushion capacity 70 T Die cushion stroke 203 m weight app. 120 T Stroke dia at four pressure points: 400 x 190 mm Stroke dia for pressure transformer: for pneumatic: 200 mm for hydraulic: 30 mm extending table: Pulling device in the table: Puller quantity: 2 pieces Pneumatic cushion quantity: 2 pieces Pressure plate surface on cushions: 1170 x 977 mm Impact diameter: 1000 mm Push stroke: 203 mm Total force at pressure above 6 atm. : 70 Mp

Surface Grinding Machines ABA FFU1000 / 60


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...

CNC Surface grinding machines Jung J525E


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...
Find used machinery dealers in your country