face to face used for sale

Key data: 600

New planboard Roehm 600 mm Direct recording Camlock - 8

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 510 mm -Shot: short taper 8 -Hole circle: Ø 170 mm -Through hole: Ø 93 mm -Groove width: 20 mm -Weight: 60 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 600 mm -Through hole: Ø 136 mm -Hole circle: Ø 170 mm -Weight: 111 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Through hole: Ø 28 mm -Recording: approx M77 x 6 -Weight: 41 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm -Weight: 234 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 320 mm -Take: Camlock short taper 6 -Hole circle: Ø 133 mm -Through hole: Ø 95 mm -Weight: 40 kg

Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Jaws and threaded rods: missing -Chuck size: Ø 355 mm -Weight: 15 kg

faceplate diameter: 1000 mm internal diameter: 400 / 90 mm weight: 285 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 415 mm -Inside diameter: 105 mm -Hole circle: Ø 172 mm -Weight: 49 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 500 mm -Taper holder short taper: 6 -Inside diameter: 95 mm -Hole circle: Ø 133 mm -Weight: 82 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 355 mm -Admission thread pitch: 4 mm -Rezess: Ø 70 mm -Weight: 35 kg

Face plate, face plate chuck, four-jaw chuck -Manufacturer: FUP -Type: PUUf-M400C6ZJ -Chuck size: Ø 400 mm -Short taper mount for: bayonet disc -Short taper size: 6 -Short cone diameter: 106.375 mm -Hole circle: Ø 133.4 mm -Number: 2x available -Price: per piece -Weight: 57 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 400 mm -Taper holder short taper: 6 -Weight: 66.5 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 340 mm -Admission thread: M75 x 6 mm -Weight: 23 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -Passage: Ø 133 mm -Short taper mount: Ø 140 mm -Hole circle: Ø 172 mm -Weight: 52 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 660 mm -Taper cone: Ø mm -Thread mounting inside: M124 x 6 mm -Through hole: Ø mm -Weight: 170 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 345 mm -Recording thread pitch: 3.0 mm -Rezess: Ø 65 mm -Weight: 20 kg

Face plate, rotary table, clamping plate -Face plate: Ø 2300 mm -Thickness: 80 mm -Weight: 4450 kg

Face plate, rotary table, clamping plate -Outer diameter: O 1000 mm -Height: 100 mm -Weight: 574 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 (Ø 106 mm) -Through hole: Ø 80 mm -Weight: 82 kg

Face plate, face plate chuck -Chuck size: Ø 255 mm -Height: 85 mm -Grooves: 14 mm -Bore center: 75 mm -Weight: 10.8 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 365 mm -Thread: M47x4 mm -Weight: 24 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 367 mm -Thread: M76x6 mm/M91x3 mm -Weight: 31 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 500 mm -Short taper mount for: bayonet mount -Cone size 6, bolt circle: Ø 133.4 mm -Weight: 73 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 490 mm -Short taper mount for: bayonet disc mounting, cone size 8 -Hole circle: Ø 171.4 mm -Weight: 72 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Admission thread: M68 x 6 mm -Weight: 20 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -Thread mounting type: M76 x 6 mm -Weight: 43 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 380 mm -Admission thread: M76 x 6 mm -Weight: 38 kg

Face plate, face plate chuck, four-jaw chuck -Transfer in current condition as seen -Chuck size: Ø 360 mm -2x thread mounts are missing -2x jaws are missing -Admission: M 47 x 4 mm -Through hole: Ø 43 mm -Weight: 23 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 330 mm -Taper cone: Ø mm -Thread holder inside: M56 x 5 mm -Through hole: Ø 51 mm -Weight: 23 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 560 mm -long jaws -Cone: Ø 120 mm -Through hole: Ø 110 mm -Hole circle: Ø 170 mm -Weight: 94 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 900 mm -Short taper: 11 -Cone: Ø 196 mm -Hole circle: Ø 235 mm -Through hole: Ø mm -Weight: 238 kg

Faceplate, faceplate chuck, four-jaw chuck -Handover in its current condition as inspected -Mouth size: Ø 500 mm -one threaded insert is missing -all 4 cheeks are missing -Cone: Ø 105 mm -Through hole: Ø 80 mm -Bolt circle: Ø 132 mm -Weight: 45 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 -Flange: Ø 106 mm -Hole circle: Ø 135 mm -Through hole: Ø mm -Weight: 65 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 172 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 80 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Flange: Ø 200 mm -Hole circle: Ø 170 mm -Through hole: Ø mm -Weight: 60 kg

Key data: 250 mm

Various well-preserved face plates Various dimensions

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

Applications: Testing of skin elasticity Endodermic massage Electroporation Ultraporation Ultrasound Micro-cleaning

Face plate, face plate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 410 mm -Recording: see photos -Through hole: with thread M72x4 -Weight: 38 kg

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Mount: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9 kg

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Face plate: chuck size Ø 400 mm -Cone: Ø 102 - 82 mm -Intake: thread M152 x 4.5 -Through hole: Ø 82 mm -Weight: 54 kg

faceplate diameter: 400 / 450 mm bore: 100 / 120 mm faceplate - height: 120/165 mm short taper: Din 55022 7 Gr. 11 Four-jaw face plate. Short taper - design, according to DIN 55022/27, size 11, with 6 studs, reversible top jaws, Baking individually via threaded spindles only individually adjustable. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS2 / MS2a -Recording: MK2 -Quantity: Front dimension 4x Ø 22 mm / 3x Ø 25 mm -Price: per piece

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

faceplate diameter: 400 mm bore: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 610 mm adjustment: 200 +/- mm spindle bore: 102 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 630 mm total power requirement: kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,63x0,63x0,120 m very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.