We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,099 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Cabinet with tools for honing machine make NAGELCabinet size: 750 x 520 x 1460 mmNumber of drawers: 24Content consisting of- Honing tools- Recordingsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
FaceplateDiameter: 900 mmPlate thickness: 135 mmSpout flange to: DIN 55027/8used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Brand new three-jaw lathe chuckChuck diameter: 250 mmLining hole: 85 mmRecording: Camlock 8:: 136.3 / 139.2 mmWith- 6 locating bolts- reversible, screw-on top jawsSpecial pricePrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Two-jaw lathe make Fabr. BISON steel versionYear of construction 2008Chuck diameter: 250 mmBore: 75 mmWith- 1 set of base jaws- 1 set of soft top jaws- cylindrical flange receptacle- square keyunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Multi spindle drilling head make SAWAS type SBS Gr. IIFabr. -No: 10957 Year 1995Number of taps: 6is: 4Spacing of the drill spindles: 65 mmPosition of the spindles: m lineGear ratio: 2External dimensions approx: 400 x 300 x 350 mmWith- Adapter flange for Alzmetall SB machinesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
1 item = 44 drilling spindle carrier make BOLEY type W and type U1 item = 32 articulated spindles make BOLEY type W and type Uused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
PRAMET type S25T-PWLNR08KT306 lathe chiselPRAMET type S32U-SDUCR11-A830102 lathe chiselPRAMET type S40U-PCLNR lathe chiselusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Test mandrelTechnical specifications:Diameter: 49.999 mmLength: 330.324 mmRecording: ISA 40unusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Deep hole drill make SASSEXTechnical specifications:Drilling depth: 400 mmDrilling diameter: 60 mmTool holder: MK 5Overall length: 590 mmWith- Internal coolant supplyusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
1 lot = 46 broachesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Machine vice mechanical / hydraulic make RÖHM type RBFabr. -No: ID158413 / PTechnical specifications:Jaw width: 160 mmJaw height: 49.6 mmTotal length: 817 mmTotal height: 133 mmTotal width: 240 mmPunching force: 50 kNWeight approx: 60 kgWith- Clamping range 310 mm- mechanical drive with hand crank- hydraulic power transmission via hydraulic unitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price
used
Item no. 5044: 1 gebr. Tool Presetting Device Fabr. ZOLLER, Type V 400 Z , Bauj. 2002
used
Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm
used
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,44 x 1,8 x 2,05 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Maho MH 600 Universal Milling Machine Specification Manufacturer Maho Type MH600 Year. Unb. Axis displacement X-axis 400 mm Y-axis 210 mm Z-axis 300 mm Main spindle speed 20 - 4000 rpm Tool holder ISO-40 Extras Vertical head with pinole Various tool holders Universal table Digital display 2-axis Machine documentation Coolant set.
used
Lid S1 Tool Grinding Machine
used
Sell Perkins engine with torque converter gearbox Engine type LD20170 Torque converter transmission Voith Type 843K Price VB
used
1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter, ...
used
Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg
used
Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO
used
Tool cabinet Cabinet complete G&-4955
used
according to pdf attached
used
I sell a router for Koperfräsen Sicar, built in 1998. Milling head with motor Swivel + - 45° Spindle holder fi.10mm Electric motor: 1.9kW / 2800 rpm -> 18,000 rpm at the spindle 1.5 KW / 1400 rpm -> 9,000 rpm on the spindle Pneumatic connection the milling cycle, pedal operated. Made in Italy.
used
Displacement of the X-axis: 850 mm Displacement of the Y-axis: 300 mm Displacement of the Z-axis: 420 mm Spindle holder: ISO 50 Spindle speeds: 45 - 2,000 rpm. Digital display: Heidenhain 2-axis Table size: 1200 x 320 mm Feed X and Y: 14 - 900 mm/min. Feed Z:4 - 250mm/min. Rapid traverse X and Y: 2,800 mm/min. Rapid traverse Z:800 mm/min. Equipped with: - Cooling device - Machine clamp Country of origin: Czech Republic Spindle motor: 5.5 kW Machine weight: 3,300 kg Machine LxWxH:300 x 270 x 200 cm
used
Axis X ... 500mm Axis Y ... 350mm Axis Z ... 300mm workpiece weight ... 800kg Clamping table surface ... 780 x 875mm L x W x H ... 2310x1810x2050mm Machine weight ... 2550kg The price includes CAD/CAM SW Kovoprog.
new
New, originally packaged European tool. First choice. Very high quality. No return To visit all of them with us. Article Number Quantity Watts C VBLI 12 56 12 W C VLIX 36 26 3.6 w C VTA 300 4 300 W C VT 50 REAM 2 500 W C VML 205 E 6 200 W C VML 75 6 75 W B TP710 FGD 90 710 W B AT 36 LI 120 3.6 V B TALI 12 120 12 V Total 430 pcs.
used
CNC Tool grinder Makino Seki Mod.CNJ5u-H Year: 2009 Excellent condition, occasionally used by Samsung Electronics.
used
No. 5152: 1 gebr. Tool milling machine Fabr. LID , Type FP - 4 M,
used
No. 5153: 1 gebr. Tool Presetting Device Fabr. ZOLLER
used
Tooth colloid mill Manufacturer Probst & Class PUC Type 10 L Power 7.5 kW RPM 2910
used
Inline homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Power 22 kW, litre output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing
used
Used spiral conveyor belt with downward direction LIPSIA -In bakery condition- - Spiral conveyor belt - Collection table - Crimp barrel catch plate The plant is out of service. Viewing and test run are possible by arrangement.
used
Used pallet rack - approx. 3,500 x 11,300 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well a ...
used
x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC control DIALOG 11 Spindle speeds 31 - 5,000 rpm Spindle holder ISO 40 Table size 620 x 390 mm Table load 250 kg Feeds infinitely variable 2 - 6,000 mm/min Drive power 5.5 kW Pinole stroke 80 mm Coolant device Operating voltage 380 V Total power requirement 11.0 kVA Machine weight approx. 1.65 t Space requirement approx. 1.85 x 1.90 x 1.80 m Electrical cabinet 1.35 x 0.70 x 1.70 m Coolant box 1.00 x 0.45 x 0.20 m
new
Tol measurements: - weight max.: - range L-W-H: 960x650x840 mm tool adaptor: ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Tol measurements: - weight max.: - range L-W-H: 960x650x840 mm tool adaptor: ISO 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
TABLE 500 X 800 ISO 40 CNC1600
used
: gebraucht : 1973 : 5400 : Deutschland : 2400 € : 1 : 350/338 x 125 x 165 mm : 550 x 180 mm : 1700 mm : 1000 mm : 1400 mm : 740 kg 4 working stations by 2 seperated motors coolant equiptment main grinding station with variable drive 16 - 25m/s left/right run and 2 extra wheels lapping station with 2 speeds andleft/right run (without wheels) man grinding wheel with 2 grinding wheels and each with 1 table550 x 180 mm with t-slots infeed-, tilting and pendulum funktion lapping station with table200 x 210 mm with t-slots infeed-, rotating-, pivoting, tilting and height adjustable lapping station with table300 x 185 mm with t-slots infeed-, tilting and pendulum funktion no users manual Does not comply with the present industrial safety regulation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K Year of construction 1994 Operating hours 42,.650 hours, stand September 2022 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Filling volume 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm, lenght variable Drive power 2 x 30 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 16 tons/hour bulk weight of 50 kg/cbm approx. 25 tons/hour bulk weight of 100 kg/cbm approx. 47 tons/hour Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material Filling volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX 47 Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h) Transport weight baler 38.5 tons Condition of the baler: The machine was ...
used
General: Year of construction 1993 Speed 4,500 rpm Dimensions 500 mm x 530 mm x 1230 mm Weight approx. 150 kg Other equipment and included accessories: Machine light
used
measuring range X-axis: 520 mm measuring range Y-axis: 500/800 mm Table dimensions: 800 mm dimensions of the machine ca.: 2,5x1,2x1,8 m Total weight, approx.: 1300 kg Schnellverstellung: CNC, motorisch oder selektive Einhandbedienung. Feinverstellung: µ-genau mit CNC oder elektr.Handrädern Schneidenabtastung: CCD-Kamera mit telezentrischem Obejektiv Messsteuerung: KELCH-EASY WEBSET auf Basis IPC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Control Heidenhain CNC 234, Workspace: X 700 mm, Y 450 mm, Z 450 mm, Tool holder ISO 40, Pinole stroke vertical 80 mm Working spindle 2o - 4000 rpm. Power consumption 11 kVA, Weight approx. 3,600 kg, Dimensions: L 2490 x W 1780 x H 2010 mm Accessories: approx. 20 various tool holders, Machine can be viewed under power.
used
Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120
used
- Load capacity: 27 kg - Machine weight: 100 kg - Space requirement (W x D x H): 1.1 x 0.25 x 0.5 / 0.6 x 0.5 x 0.67 m - Condition: very good Details Gripper for tools or other parts. The part weight can be adjusted for lifting/lowering. Functions: Lifting/Lowering, Gripping, Swivelling Gripper holder 0.42 x 0.5 m Accessories no other accessories
used
Milling machine, universal milling machine, tool milling machine -Clamping table: 300 x 800 mm -X/Y/Z 500/285/H430 mm -Spindle mount: SK40 -Speeds: from 40 to 2000 rpm -Power supply: 8-400mm/min - Rapid traverse: 600 mm/min -Cooling unit -Dimensions: 1430/1200/H2000 mm -Weight: 1594 kg
used
Available in stock 1 x Used Tool for extraction of fire land ring. The tool is used but in good working conditions.
used
Oppold Folding head WPL-HW System 132 x 45 x 30mm n to 10,000 rpm G&-4999-M356V