fabr unbekannt used for sale

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

max. temperature: 150-500 Grad basket dimensions: 300x210x460 mm total power requirement: 2.6 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 0.80x0.60x0.95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 110 mm

HBM HWCa-110, new in 1965

General SKU268N284 MakeKLEIN VAKUUMTECHNIK GMBH No.8765 Year of construction2000 Mounted on framecheck Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume235 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 Number of compartments:1 Capacity235 Ltr Internal width600mm Internal depth650mm Internal height600mm Electric heatingcheck With trays2 MaterialStainless steel General LocationBarneveld Floorspace1,2 x 0,9 M Total height2,0 M Extra Specificationswith vacuum pump, brand Leybold, type D16BConsumer wastePaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchDrying ovensOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood ad ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg

spherical roller bearing -Type: 22218 E -Weight: 3.5 kg -Outer diameter: 160 mm -Width: 40 mm -Inner diameter: 90 mm

Scheffer Indoor Crane System 500 kg For sale is a high-quality, fully functional indoor crane system (single-girder overhead crane) from the premium manufacturer Scheffer Krantechnik, equipped with first-class quality components from Demag. The system has a synchronous double hoist (tandem operation) with two independently movable Demag electric trolleys. This design is ideal for lifting long, bulky or heavy goods (such as profiles, pipes or plates) absolutely horizontally and safely at two points at the same time. Technical data for the load capacity & performance: Total lifting capacity of the system: 500 kg (0.5 tons) with simultaneous use of both hoists Load capacity per hoist: 250 kg individually Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoists in 2-strand operation with a base load of 125 kg each) Crane manufacturer: Scheffer Krantechnik (Leading ...

This 7-axis Mazak 3D Fabri Gear 150 was manufactured in 2005. It features an impressive X-axis travel of 8750 mm, Y-axis travel of 1270 mm, and Z-axis travel of 375 mm. The machine is equipped with a powerful 2.5 kW resonator, providing efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the Mazak 3D Fabri Gear 150 machine we have for sale. Contact us for further details.

for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt

Staehle grinding machine Manufacturer Greif Staehle auflage adjustable at angle Cooling agent tub Almost unused condition from a training workshop. Special price

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Manufacturer: Unbekannt, Year: ca.1995, Working length mm: 2500-3000, Working widht mm: 1300, Total hight mm: 9800, Engine power kW: 1,5, Feeding speed max m/min: 8-25, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :ca.1995

Manufacturer: Unbekannt, Year: ca.1995, Lifting power kg: 1000, Length mm: 2000, Width mm: 1000, Lifting hight approx. mm: ca.1500, Total hight mm: 250, Safety strip: yes, built-on roller conveyor: yes, Year :ca.1995

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 105 mm, 2 pieces -Inside: Ø approx. 25 mm -Price: complete -Weight: 2 kg/piece

Forklift Battery Charger, Industrial Charger, Forklift Battery Charger, Industrial Charger -Handover: in the current state as viewed -Housing: self-made -Power: V/A -Connection: 220 volts -Dimensions: 200/405/H400 mm -Weight: 20 kg

OFFFER OF THE FOLGENDEN ARTIKEL Number: SD001 Number: 1 apiece Shoe repair centre (cleaning machine, etc.) Factory: Hardo Type: unknown/no type recognizable Accessories: various accessories (see pictures) Dimensions above all: Width 1540 mm x height: 1790 mm x Tife: 790 mm State Note! See also the Foto/photos about the condition. Note! Only the described item is sold. Nothing else that can be seen in the pictures.

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 58 mm -Clamping depth: max. 190 mm -Number: 1x vises available -Price: per piece -Dimensions: 520/280/H155 mm -Weight: 55 kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 47 mm -Clamping depth: max. 157 mm -Number: 1x vices available -Price: per piece -Dimensions: 460/226/H130 mm -Weight: 33 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Mouth size: Ø 160 mm -without: interchangeable jaws -Central bore: mm -Dimensions: 320/230/H220 mm -Weight: 30 kg

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 18 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 130/248 mm -Weight: 14.7 kg/piece

full drawer cabinet cca 350 pcs various pinball, thread edging, etc.

thickness of jaw: 160 mm : 50 mm clamping width: 125 mm clamping capacity: / t weight: 40 kg dimensions of the machine ca.: 390 x 285 x 165 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 215 mm : 45 mm clamping width: 170 mm weight: 62 kg dimensions of the machine ca.: 545 x 445 x 160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 15 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 125/230 mm -Weight: 11.7 kg/piece

MIG/MAG hose package -Length: 4.2 m -Water cooled -Weight: 1.9 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 50 mm -Piston rod: Ø 35 mm -Threads on piston rod: 2x M 30 -Stroke: 100 mm -Dimensions: 445/140/H90 mm -Weight: 9.6 kg

thickness of jaw: 160 mm : 52 mm clamping width: 260 mm clamping capacity: 4,5 t weight: 52 kg dimensions of the machine ca.: 550 x 250 x 125 mm - Serial-No.: 7514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Steering cylinder: stroke 198 mm -Piston rod: Ø 40 mm -Recording piston rod: Ø 24 x24 mm / Ø 28 x 22 mm -Dimensions: 715/110/H115 mm -Weight: 12.8 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 80 mm -Piston rod: Ø 50 mm -Piston rod mounting: 2x Ø 35 mm -Stroke: 150 mm -Dimensions: 780/205/H135 mm -Weight: 33.6 kg

Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston: approx. Ø 50 mm -Piston rod: Ø 36 mm -Thread on piston rod: 2x M 27 -Stroke: 160 mm -Dimensions: 695/140/H120 mm -Weight: 17 kg

TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body -Length: 8.5 m -Tuchel connector: 5 pin -Water cooled -Weight: 4.8 kg

TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body -Length: 8.2 m -Tuchel connector: 5 pin -Water cooled -Weight: 4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 12 mm -Stroke: 60 mm -Admission piston rod: M12 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: Ø 55/H250 mm -Weight: 3 kg/piece

Key data: 360 mm, 360 mm, 870 mm

4 side tensioning tower with a height of 870 mm incl.

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 55 mm -Condition: used -Stroke: 135 mm -Dimensions: 550/160/H120 mm -Weight: 20 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter -Recording: MK6 -Tool holder: Ø 30 x 85 mm -Number: 1 recording available Price: per piece -Total length: 290 mm -Weight: 8.6 kg/piece

V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg

Complete car wash for sale only for self-dismantling and self-collection. - 4 boxes to wash yourself, each with a stand-up high-pressure pump with steam jet and brush. Dimensions per box: 4.5 x 6 meters - Continuous washing system: chain shaft is 25 m long, squat pressure water 160 bar Nilfisk, 4 dosing pumps. The car wash is for sale complete with office, gas heating and complete accessories (see pictures). The car wash can be visited at any time. If you have any questions, please do not hesitate to contact me by phone.

Upper support, upper slide, dovetail guide -Rezess: Ø mm -Hole circle: Ø mm -Dimensions: 121/295/H200 mm -Weight: 12 kg

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: dividing head -with: hand crank -Dimensions: 390/400/H200 mm -Weight: 28 kg