fa weber used for sale

HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Hot melt adhesive binder Fastbind Elite XT; good condition; cleaned and tested; Format A3+; hot melt; Binding length max.455mm; Binder thickness 140-320mm; Book thickness max.40mm; Tool for soft- and hardcover. Hot melt perfect binder Fastbind Elite XT; good condition; cleaned and checked; size A3+; hot glue; Max.Book Lenght 455mm; book lenght 140-320mm; Book Thikness Max.40mm; Tool for soft and hard cover.

capacity: 30,000 ltr./h 3 component mixer with Bran + Lübbe fine dosing pump

Moving column boring machine INNSE FAC 221 for sale Technical data: - CNC: Siemens 840 D - X axis: 14.970 mm - Y axis: 6.000 mm - Z axis: 1,500 mm - W axis: 1.500 mm - V axis rotating support plane: 3.000 mm - Rotating support table dimensions: 5.000 x 4.000 mm - Fixed table dimensions: 8.000 x 7.440 mm - Maximum permissible load on the table: 120,000 kg - Spindle power: 130 kW - Number of spindle revolutions/minute: 700 rpm

Refer to code 1009 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Technical data of the hydraulic grille for 3-roller sheets Faccin HAV 3172 used: Upper roller diameter: 720 mm Diameter of side rollers: 650 mm Power supply: 380V - 50Hz Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

Refer to code 1011 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Level limiters for water-polluting liquids for sale. Afriso / Fafnir NB 220 QS for 220V AC 10 pieces available, all in original packaging.

Faltex Folding machine Digital counter

Refer to code 1012 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Feed reel Manafacture: FAGOR Type: 100G

Refer to code 1018 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...

Refer to code 1052 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg

Complete palletizer, make Procomac, for 12x 1.0 PET cycle modular crates and Schrinkpacks, built 2000, with Fanuc robot, 1 palletizing head for modular crates, 1 palletizing head for Schrinkpacks, pallet magazine, pallet transport, required installation space approx. 150 m².

For vegetable

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31i-B5 Tools changer: 14 pos. table-size: 850 x 410 mm number of spindle speeds: 24.000 U/min/rpm rapid traverse feeds: 48 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refrigeration system from Vektor with 2 fans Year of manufacture : 1996 at the moment unfortunately no further information about the product

Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

Axial groove ball bearings, axial groove ball bearings, axial ball bearings, axial bearings, axial spherical roller bearings -Condition: Original packaging -Manufacturer: FAG, Type 507122 -Outer diameter: 380 mm -Overall dimensions: Ø 380 x 125 mm -Weight: 37 kg

used DC shunt motor 18 kW Anchor voltage 460 V 45 A 3000 rpm with filter fan and tachogenerator can be installed as B3 or B5 Collector and carbon brushes top

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Fork positioner with separate sideshift, hydraulic fork adjustment, sideshift, side lift, forklift blade, tine carrier -Manufacturer: SE Fahrzeugwerke, type 1/9953 -Load capacity: 860 kg -Tine length: 1000 mm -Tine width: 595 mm to 1800 mm -Dimensions: 1240/915/H610 mm -Weight: 272 kg

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

Blade mixer Manufacturer: SEW-EURODRIVE Type: FAF 47 DT7104/1F Power: 0.37 kW Speed: 1380 rpm LWH: 210 x 300 x 1550 mm

Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Power: 4x5/3/1.29/0.86 kW -Resistance: 4x 33/28/66/100 Ohm -Dimensions: 595/480/H955 mm -Weight: 58 kg

Technical data of the Faccin HAV 3162 hydraulic plate calender used: Upper roller diameter: 620 mm Diameter of side rollers: 550 mm Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

Bread long knitting machine, Fabr. Benier, Type B0 - 78

Axial deep groove ball bearings, axial deep groove ball bearings, thrust ball bearings, thrust bearings -Manufacturer: FAG, axial deep groove ball bearing 51164PM, OVP -Outer diameter: 400 mm -Dimension: Ø 400 x 65 mm -Weight: 18.4 kg

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H75 mm / 150/77 / H159 mm -Weight: 7.2 kg / 11.4 kg

Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'

Electronic control module for folding machines EUROFOLD, FALTEX used. Art.: PS21 Spare part number: 235.102 It can also be used for other types of machines. Is integrated into the vacuum supply system. Controls the operation of the machine, makes it possible to adjust the work by clock; with interruption, by a certain number of sheets; Perform direct and backward counting of the sheet. The photo on the site may differ from the original (we send it on request)

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H77 mm / 150/77 / H160 mm -Weight: 6.9 kg / 11.2 kg

turning diameter: 200 mm turning length: 508 mm x-axis: 176 mm z-axis: 520 mm control: Fanuc-Series O-TD total power requirement: kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2,73x1,98x1,64 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAB3 jointing nozzle -Pressure: 6.0 - 7.0 bar - Price: per piece - Quantity: 14 pieces -Dimensions: 110/25/H25 mm -Weight: 0.1 kg/piece

Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAG3 jointing nozzle -Pressure: 6.0 - 7.0 bar -Price: per piece Quantity: 6 pieces -Dimensions: 100/19/H19 mm -Weight: 0.1 kg/piece

Affeldt roller conveyor tables 1000-531-237 mobile, two-part RA1292 The staging roller conveyors have two parallel roller conveyors and have a mobile base frame. This makes them flexible to use. They are in good condition (used). Technical data: Manufacturer: Affeldt Type: Roller conveyor 1000-531 Year of manufacture: unknown Condition: good (used) Conveyor length (FL): 1000 mm nominal/outer width (NB): 531 mm Conveyor width total: 531 mm Conveyor width single: 2 x 237 mm roller pitch: 34 mm Height OK roller: 850 mm adjustable +/- 50 mm Scope of delivery: with base frame and swivel castors Availability: 7 pieces Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. W ...

turning diameter: 330 mm turning length: 140x130 mm control: turning diameter over slide: 140 mm travel -x axis: 107 mm travel -z axis: 230 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 min⁻¹ Positioning accuracy in one direction (1): 0,006 / 300 mm Positioning repeatability (2): +/- 0,002 mm ...