fa weber used for sale

WEBER COOLING BASE TWO Vacuum cooling system Cooling capacity: 2 IP or 2 EUR Products to be cooled: leafy vegetables/fruits up to 1000 kg Cooling temperature: from 20-30 degrees C to 3-5 degrees C Control: PLC Unitronics V1040, Weber 2022 software Vacuum pump: 1 x Busch RA R5 0305D ( 300 m3 / h ) Chiller: Aermec ANL 202 Compressor: Metabo Basic 250-24W OF

According to the description below

Weber ASB 400 skinner, cutting width 400mm, can be used (open) as combination machine with carriage table or (closed) with pressing unit and conveyor. You are very welcome to inspect the machine in 56070 Koblenz, Germany.

Hydraulic bottles Jack stamping trolley lifter for trucks and commercial vehicles. Manufacturer Weber Hydraulics Lifting capacity 20to Building height 240mm Lifting distance 155 mm Threaded length 110 mm Total length extended and thread turned out 505 mm Diameter piston rod 60 mm Unused lifter from Bundeswehr bestaenden, without oil filling and without pump ingestion rod. 12 stueck available, price per piece. Special price

Bluhm Weber Legi-Air 4050S Labeling Machine 4.14.1 Basic structure The system is designed as a closed aluminium profile frame and has a very compact design. The control cabinets are integrated in the lower part of the frame. The main valve terminal is located behind a service door below the control panel. The facility includes four workplace stops. Operation is via a touch screen. The control panel is mounted on the right side of the frame. In the station, a labeling system from Bluhm Weber is used, here the documentation of the company Bluhm applies accordingly. 4.14.2 Functional sequence - The retracting workpiece carriers with IO modules are stopped, excavated (positioned) and contacted in the substations 10.1 or 10.2. In these two stations erf - In substation 10.3, the IO modules are automatically labelled. The generation of the labels and their content ...

Various vibrating pans, sorting and feeding units, etc.

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

According to description pdf attached complete line for profiles + WPC profiles

pdf attached

Ice-generator Ice production: approx. 700 kg in 24h Power supply: 400 V, 50 Hz, 3 phase, 16 A Control voltage: 24 V Power consumption: 2,1 kW Refrigerant: R 404 A Dimensions: Width 1000 mm Depth 800 mm Height 1100 mm

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.

in very good working condition

NEW - BG knife holder set - article number 624050 for Abschwarter Weber ASB 600 MIT Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Knife for slicing machine WEBER CCS 304,305,402,404,405,602,604 diameter 460 mm 4 holes with a diameter of 20 mm center hole 48 mm weight 5,24 kg Catalog number : 70505008 10094 Clamping disc waga 0,46 kg Catalog number : 70504837 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Derinder Weber Type: ASC 460 Engine power : 1.1 kW Connected load : 400V/50 Hz/16 A Weight: 315 kg Dimensions: Width 910 x Length 890 (with bands 1800 mm) Thickness adjustment : from 0 - 15 mm Spring-loaded cutting system Pressure roller automatically adjusts to the cutting height Max. product setting 90mm Feeding and discharge conveyor with quick-release device Cleaning : Disassembly/assembly of all product-carrying parts without tools Integrated crate support Request a quote INTER-WIBA Sp.j. Ul. Krakowska 263 Pl 43-305 Bielsko-Biała NIP PL547-17-47-669 Phone 0048/33 812 58 60

Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg

PVC sheet extrusion line with head: 280mm, composed of: - 2-screw extruder, brand: Weber, model: DS.8.22, motor: 30 Kw (40 hp), load doser, degasser with vacuum pump. Variable speed drive and electrical panel. - Wide blade head: 280 mm. - Calender, width: 300 mm, diameter: 150 mm. 3 water-cooled rollers. With stretching. - Ink baths, dryer, stretch for several coats of paint. - Cutting shear. - 1-reel winder, width: 300 mm. - Various replacement rollers for ironboards, printers and engravings (drawings on foil). Ahem: Wood simulation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)

Key data: 75 1/min

This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 042 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 58.668

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg -Dimensions: 900/580/H1450 mm -Total weight: 454 kg

Labeller for two-sided labelling of rectangular, conical, oval and semicircular products • 2 lateral label dispensers Bluhm Weber Alpha Compact Plus RH+LH in the wipe-on procedure, can also be used individually • Label dispenser height/cross/length adjustable and inclinable • Label format min. 10 x 10 mm, max. 200 x 200 mm • Label roll diam. 300 mm, core diam. 76 mm • One-sided inkjet printing unit for labels Bluhm Weber Markoprint X1 Jet with cartridge • Press-on device • Output max. 80 labels/min • Basic conveyor belt width 80 mm • Interchangeable separator at the infeed • PLC Siemens S7-1200 CPU 1214C • HMI Siemens Simatic • Drive 400V/50Hz • Chain alignment for centred positioning of the products • Head band for product stabilisation • Product delivery on Bluhm Weber turntable, diam. 1,000 mm, white plastic plate, speed adjustable, ...

screw ø:: 65 mm screw length:: 17D screw speedl:: -- U/min drive power:: 20 kW Condition: used - Specification: Twin screw plastic extruder line Overhauled 2012, consisting of: twin screw extruder make Weber DS 65 - year of construction 1982 - screw diameter: 65 mm - Screw length: 17D - Output approx.: 80 kg/h, depending on mould and melt pressure - Main motor power: 20 kW, with frequency converter - 4 cylinder zones, 8 mould zones - Degassing with filter container - Volumetric dosing Calibration table IDE ME 14/3 - Year of construction 1996 - Length: 3m - 2x vacuum pumps: 3 kW Caterpillar haul-off IDE ME 32/3 - Year of construction 1997 - Contact length: 1,200 mm - Cleat width: 160 mm - Speed: 1 - to 10 m/min - Pneumatic clamping Circular saw IDE ME 52/3 - Year of construction: 1997 - Saw blade diameter: 350 mm - Pneumatic movement and ...

Weber ASC 560 in absolute top condition

Power trowel, concrete trowel, screed trowel -without a flat iron -Weight: 60 kg

Conditie: Gebruikt Voorraad nummer: 2397P Type: CCS904 serienummer 7096 Bouwjaar: 2007 capaciteit: 2000 RPM Plakdikte: 0,5 - 50 mm Perslucht: 10 bar, 150 l/min. Power: 3 x 400V, 50Hz, 10 kW Afmetingen : 13400 x 1900 x 2600 mm Pago labelprinter type Systeem 516 Pago-etiketteermachine Serienummer 212516068 Pago-etiketteermachine Bouwjaar 2012 Mettler Toledo metaaldetector en controleweger type XS3 Mettler Toledo metaaldetector en controleweger Serienummer 35000430 Mettler Toledo metaaldetector en controleweger Bouwjaar 2008 Bosch Sigpack Systems robot-/kartonlijn Type: LDM + TTLi Bosch Sigpack Systems robot / kartonneerlijn Serienummer: J-01659-LDM-042 / J-01659-TTLi-077 Viewtech optische besturing Type: VT2007/010 Viewtech optische besturing Serienummer: VT2007-DCDCL/057 Inclusief CCW904-weegschaal, CCR904-schommelmechanisme, CCA-snellader en CCU-portie-eenheid. Met af ...

WEBER CCS 602 WITH FLOWPACK PACKAGING LINE IN PERFECT CONDITION

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

Dimensions (L,W): 1000 x 800 mm For sale are 51 machine pallets for Burkhard and Weber MCR 120 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Weber, Type: K 1-1100 V, Year: 2001, Monting of the machine: Walze, Double sided sanding line: no, Sanding width mm: 900, Sanding hight mm: 100, Number of sanding belts: 1, Continous adjustable feeding speed m/min: 2 - 14, Feeding engine kw: 1,3, Sanding belt dimensions: 2.620 x 1.150, Table hight adjustment by engine: no, Rollers: 1, Power belt 1 in kW: 15, Intermediate sanding of lacquer: no, Vacuum table: 2,2, Noise enclosure: yes, Brushing unit: 0,55 kW, Year :2001

Manufacturer: Weber, Type: OFZ 1 - 1350, Year: 1993, Monting of the machine: Walze, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 1, Sanding belt dimensions: 2.620 x 1.350, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: yes, Rubber roller: 1, Band 1 Leistung kW : ca 18, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: ca 5 - 15, Transportbandantrieb kW: ca 3, Intermediate sanding of lacquer: no, Year :1993

Labeller Manufacturer: Weber Alpha Compact Type 150-30-LH Year of construction 08/2018 Suitable for self-adhesive labels

Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005

Cutting line WEBER SLC 602 with Slicer CCS 602 with CCW scale (up to 1,000 g) with CCR seesaw (sorting belt) with inlay line CCA with CFS thermoforming vacuum packaging line TIROMAT POWERPACK type 660 with Metal Detector LOMA IQ3 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Weber SLC 602 Slicing, Slicing, and Weighing Line for Meats and Cheese Capacity up to 600 cuts/minute Comprises: Weber CCS 602 Slicer CCW Scale (up to 1,000 g) Outfeed Belt With WEBER CCA Automatic Loading Line For meat, sausage, and cheese products Capacity: up to 600 slices/minute Slicer with sorting belt and conveyor Maximum product length: 1100 mm Adjustable cutting thickness from 0.1 to 50 mm Custom programming (up to 100 cutting programs) The machine is designed for efficient and economical use, slicing meat and meat products. The machine is also designed for automatic slicing of fish, cheese, and other products. WEBER Slicer Model CCS 602 The WEBER slicing line is fully automatic with a conveyor belt. Conveyor belt dimensions: track width 40 cm, belt length 110 cm The automatic gripper (multi-tooth gripper - product holder) operates pneumatically  ...

Labeller Manufacturer: Weber Alpha Compact Type 150-30-LH Year of construction 08/2018 Suitable for self-adhesive labels Label width min. 10 mm – max. 150 mm Label length min. 20 mm – max. 300 mm Label roll outside diameter 300 mm Sleeve core diameter 76 mm Including tripod can be moved

weight: 2,2 t extruder diameter: mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.