126,701 used machines on RESALE, but how to find them? Machine Search
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm : 11 mm : 11 mm : 7 mm : 8 mm : 6.4 mm : 225 mm : 215 mm : 165 mm : 8 m/min : 3950 mm : 1200 mm : 1200 mm : 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the to ...
Deutz-Fahr 6190 Agrotron tractor (year 2013) - Technical data: Engine power: 139 kW Operating hours: 1,238 hours Maximum speed: 40 km/h Transmission: Powershift PTO speeds: 540 / 540E / 1000 / 1000E Cylinders: 6 AdBlue system All-wheel drive (4WD) ELC / Load Sensing On-board computer Pneumatic system - Equipment: Front loader incl. mounting frame Front linkage Sprung front axle Sprung cab Hydraulic steering Powershift reversing (clutchless forward/backward) Air conditioning Radio - Tyres: Front Tyre: 540/65R30 Tianli Rear Tyre: 650/65R42 Continental
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 7 mm : 7 mm : 4 mm : 5 mm : 5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
Total height 2.10 m incl. castors, lockable for max. big bag format: 90 x 90 x 180 cm Colour: white
Key data: 1030 mm, 2 mm
Used guillotine shears of the make Fasti type 1030x2.5 Built in 1969
Fanuc ROBOSHOT α-S30iB (2023) Model: FANUC ROBOSHOT α-S30iB Clamping Force: 300 kN Max. / Min. Mold Height: 330 mm / 150 mm Tie Bar Distance (HxV): 310 x 290 mm Platen Diameter: Ø 100 mm Injection Speed: 600 mm/s Screw Diameter: 22 mm Screw Volume: 11 ccm Resin Compatibility: Glass fiber content up to 30% Machine Type: Fully Electric Injection Molding Machine
Overview This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data Capacity: 8,000 bph at 1,5 l Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery Blow moulder: SIPA, year 2002 Compressed ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 16 mm : 16 mm : 10 mm : 13 mm : 11 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 8 mm : 8 mm : 4.9 mm : 6 mm : 6 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...
flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...
flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special el ...
flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...
flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.
Mobile cargo trestle Manufacturer: MSR Maschinen-Stahlbau Reutemann – GmbH Year of Make: 2015 Payload: 8000kg Design: 20,000 load cycles according to EN13155 Load changes performed:
Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360
Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360
pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...
sheet width:5040 mm plate thickness:2 mm total power requirement:12 kW weight of the machine ca.:9,4 t dimensions of the machine ca.:6200× 1300 ×1900 mm working width:5000 mm control:Fasti Matik stroke of upper beam:500 mm adjustment of lower beam:u.Biegewange 80 mm control cabinet:1000 x 850 x1450 mm Documents:vorhanden
x-travel:500 mm y-travel:400 mm z-travel:330 mm control:FANUC 31i B5 tool change unit:21 fach rapid traverse in x-y-z axis:54 m/min taper ISO:BT 30 turning speed range::10.000 1 / min spindle drive:11 / 3,7 kW max. table load:300 kg surface area:600x 400 mm Dimensions (L/W/H):1,6 x 2,1 x 2,25 m rapid traverse:48 m/min total power requirement:11 kVA weight of the machine ca.:2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"
Hatz 1B20-6 diesel engine, manual start Auction-ID: A1-45424-35
Hatz diesel engine, manual start Auction-ID: A1-45424-41
Equipped with 1x Honda Li-ion battery with charger 230V. Vibratory rammer can be set to three speeds 3000/3300/3600 rpm Auction-ID: A1-40135-386
Equipped with 1x Honda Li-ion battery with charger 230V. Vibratory rammer can be set in three speeds 3000/3300/3600 RPM Auction-ID: A1-40135-385
Centrifugal fan REITZ type MAE 045-017030-00Fabr. No. 601438 year of construction 2017Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³Air inlet 300 mm (nozzle diameter in the base plate)Air outlet 345 x 345 mmEngine speed 2940 rpm. Motor power 18.5 kWNet connection 400 Volt 50 Hz- fan wheel with 8 fan blades- directly flanged drive motor- flange dimensions for air outlet 450 x 450 mm- stable metal housing made of 8 mm steelSpace requirement L x W x H 1930 x 1240 x 950 mmWeight
Centrifugal fan REITZ type: MAE 031-007130-00Fabr. No. 601475 year of construction 2017Volume flow 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³Air inlet 250 mm (nozzle diameter in the base plate)Air outlet 245 x 195 mmMotor speed 2915 rpm. Motor power 7.5 kWNetz connection 400 Volt 50 Hz- fan wheel with 9 fan blades- directly flanged drive motor- flange dimensions for air outlet 310 x 260 mm- stable metal housing made of 5 and 6 mm steelSpace requirement L x W x H 1390 x 1030 x 600
Centrifugal fan KASTRUPFabr. No. 27688/1 Year of construction approx. 1985Volume flow approx. 4000 m3/hIntake pipe 250 mmExhaust air connection 400 x 120 mmEngine speed 1440 rpmEngine power 5.5 kWNee connection 380 volts, 50 Hz.- Metal housingSpace requirement L x W x H 1100 x 900 x 1220 mmWeight approx. 150 kgGood condition; used
Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50
Ankom XT10 Fat Extractor + RD Dryer Fat Extractor ANKOM XT10 for Crude Fat Determination The closed system with FilterBag technology shortens extraction times Sample Weighing: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction up to 15 samples simultaneously Semi-automatic system, Unattended process flow> 90% solvent recovery, Manual addition of solvent More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Consisting of warehouse rack with contents large batch of various screws
Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized
maximum number of results exceeded
please refine your search
10 € 
