fa weber used for sale

Key data: 1250 mm, 4 mm

Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled backgauge Side stop and table extensions Cutting length limitation Cut edge lighting Light barrier to protect the rear area Knife sharpened Weight approx. 2800 kg

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

sheet width: 2040 mm plate thickness: 4,0 mm distance between columns: 2100 mm roll diameter: 150 mm total power requirement: 7,0 KW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.

Qty. 1 Second-hand 2-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 2 - High Temper Mill 318/610 x 710 mm Built: 19 Stopped: 2025 Strip Width: 300 – 600 mm Thickness: 0.3 – 4.0 mm Max. Tensile Force 3000 kg, Coil weight: 10 T

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 16 mm : 16 mm : 10 mm : 13 mm : 11 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - .ucymachines/ Contact us at - sales@ucymachines

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 palletizing robot 6-axis robot, for payloads up to 165 g, set to Euro pallet dimensions, robot reach 2655 mm, The robot is energized due to programming, installation dimensions 771 x 610 mm, average power 2.5 kW, electrical voltage 380 - 575 V, mechanical protection IP54, wrist and arm protection IP67 The plant was shut down in 2024. Roller conveyor and feed conveyor belt can be purchased for an extra charge

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 7 mm : 7 mm : 4 mm : 5 mm : 5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...

The machine is in good technical condition; it can be tested by prior arrangement.

Scheffer Indoor Crane System 500 kg For sale is a high-quality, fully functional indoor crane system (single-girder overhead crane) from the premium manufacturer Scheffer Krantechnik, equipped with first-class quality components from Demag. The system has a synchronous double hoist (tandem operation) with two independently movable Demag electric trolleys. This design is ideal for lifting long, bulky or heavy goods (such as profiles, pipes or plates) absolutely horizontally and safely at two points at the same time. Technical data for the load capacity & performance: Total lifting capacity of the system: 500 kg (0.5 tons) with simultaneous use of both hoists Load capacity per hoist: 250 kg individually Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoists in 2-strand operation with a base load of 125 kg each) Crane manufacturer: Scheffer Krantechnik (Leading ...

Key data: 600 mm, 400 mm, 310 mm

High-quality FANUC wire EDM machine in top condition. The machine is well-maintained, ready for operation and is suitable for precise wire EDM work in tool, mould and precision machine construction. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Mains connection: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic threading of the wire Processing in a full bath Suitable wire diameter: 0.10-0.30 mm Condition: Top Condition Location: Freiburg

From a current recycling we offer you a packaging system that is specially designed for the pick and place handling of spice bags (dimensions 160x110 mm). Year of Make: 2019 Condition: (indicate any defects or damage?): dismantled Hours: unknown Asking price: VHB Original price: 373.700 € Equipment / accessories / other information: Conveyor belt/belt and belt conveyor for the transport of products, conveyor width 200mm, length 4000mm. A piece of carton erector with cutting magazine for the autom. Erection of the cartons. With the help of 2 transfer robots type FANUC M2iA / 3 SL, the bags were stacked in 4 transfer chutes with the help of Vakkum suction cups. Another FANUC LRM 200 robot with gripper picks up an erected carton and moves to the transfer station, where the products are pushed into the carton. In the next step, the robot transfers the filled ca ...

Manufacturer: FASTEMS Year of Manufacture: 2012 Model: MLS-MD Type of Machine: Multi-Level System Medium Duty Technical Specifications: - Control: Fastems MMS4 - Power Consumption: 71 kVA - Current: 56A - Power Supply: 400V AC, 50/60Hz - Compressed Air Connection: 6.5 bar - Dimensions: Approximately 23m length x 5.1m height - Shelf Spaces: 84 total (61 spaces at 630mm height, 23 spaces at 885mm height) - Pallet Size: 630 x 630mm - Handling Weight: 1,500 kg - Equipment / Setup Bays: 2 - Originally Designed For: 3x GROB G550 - Prepared For: 3 machines - Axes: 3 axes - X-axis (travel motion of storage and retrieval unit), Y-axis (lifting motion), Z-axis - (load handling device) - Cooling System: Yes, leakage oil extraction system - Maximum Speed of Storage and Retrieval Unit: 0 to 2.5 m/s - Pallet Change: Yes - Scope of Delivery: Shelf storage, storage and retrieval machine, and setup  ...

Manufacturer: FASTEMS Year of Manufacture: 2007 Model: MLS-MD Type of Machine: Multi-Level System Medium Duty (MLS-MD) - Linear Pallet Storage System Technical Specifications: - Control: Fastems MMS4 - Current: 3x63A - Power Supply: 400V AC, 50/60Hz - Compressed Air Connection: 6.5 bar - Dimensions: Approximately 18.5m length x 5.1m height - Shelf Spaces: 42 total, maximum height 1095mm each - Pallet Size: 630 x 500m - Handling Weight: 1,500 kg - Equipment / Setup Bays: 2 - Designed For: 2x Heller FP4000 - Axes: 3 axes - X-axis (travel motion of storage and retrieval unit), Y-axis (lifting motion), Z-axis (load handling device) - Cooling System: Yes, leakage oil extraction system - Maximum Speed of Storage and Retrieval Unit: 0 to 2.5 m/s - Pallet Change: Yes - Special Feature: Retrofit performed in 2017 - Scope of Delivery: Shelf storage, storage and retrieval machine, and setup st ...

Robot Fanuc M710iC/20L , R30iA complete Year of manufacture: 6/2012 Control: R30iA Number of Axes: 6 Max. Payload: 20 kg max. Working range: approx. 3110 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Fanuc LR Mate 200iC/5L R30iA Robot Control: R30iA Year of manufacture: 11/07 Number of axes: 6 Max. load capacity: 5kg Max. working range: approx. 892 mm Scope of delivery: robot, controller, scope of delivery, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M710iC/50, R30iA complete Year of manufacture: 7/2006 Control: R30iA Number of axes: 6 Max. load capacity: 50 kg Max. working range: approx. 2050 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Number of axes: 6 Max. load capacity: 7Kg Max. working range: approx. 1633 mm Year of Make: 2016 Table surface each 750x500mm Total dimensions: approx. 2500x1500x2200 Total weight: approx. 2000kg In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M20iA , R30iA complete Year of manufacture: 8/2012 Control: R30iA Number of axes: 6 Max. load capacity: 20 kg Max. working range: approx. 1811 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Roboter Fanuc Robot LR Mate 200iC Robot Controller R-30iA Mate Year of Make: 2011 Scope of delivery: Robot LR Mate 200iC Type A05B-1139-B204 I Pendant A05B-2518-C202#EGN Fanuc System R-30iA Mate Type A05B-2553-B061 Cables In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc S-500iB , R-J3iB with 7th axis/motor Year of manufacture: 8/2006 Control: R-J3iB Number of axes: 6 Max. load capacity: 15 kg max. working range: approx. 2757 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

sheet width: 1250 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,80 t dimensions of the machine ca.: m Powered Backgauge Side Stop and Table Extensions Cut Length Limitation Cutting Line Illumination Light Barrier for Rear Area Guarding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robot Fanuc LR Mate 200iB R-J3iB Control: R-J3iB Number of axes: 6 Max. load capacity: 7 kg Max. working range: approx. 717 mm radius Year of Make: 2003 Scope of delivery: robot, controller, cable, teach panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Key data: 3 mm

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Stepless speed adjustment via handwheel Clockwise and counterclockwise rotation Hydraulic infeed via foot switch Weight: approx. 550 kg Other tools on request

Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis FAMUP MCP 60 E was manufactured in 2002. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 570 mm. The machine includes a table size of 500 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 60 E vertical machining centre we have for sale. Contact us for further details.

This 3-axis FAMUP MCP70 E was manufactured in 2001. It features an X-axis travel of 700 mm, Y-axis travel of 480 mm, and Z-axis travel of 640 mm. The machine includes a table size of 600 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP70 E vertical machining centre we have for sale. Contact us for further details.

This 3-axis FAMUP MCP 45 E vertical machining centre was manufactured in 2004. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed range of 50 – 10,000 rpm and a maximum table load of 100 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 45 E machine we have for sale. Contact us for further details.

Platform Base for Fortuna Roll Presses Mobile Stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic machine, size 3/4) With deep heavy-duty castors or stationary as required With screw-on thread Made of solid stainless steel plate

Key data: 2040 mm, 6 mm

Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Motorized adjustment of the bending beam with digital display (adjustment of the sheet thickness) Manual backgauge with spring fingers up to 1500 mm 5700 kg

Number of axes: 6, repeatability: +/-0.08mm, mechanical unit weight: 145kg, max. wrist payload: 3kg, max. reach: 1437mm, axis working range: A1: 360°, A2: 250°, A3: 455°, A4: 380°, A5: 280°, A6: 720°, axis speed: A1: 225°/s, A2: 215°/s, A3: 225°/s, A4: 425°/s, A5: 425°/s, A6: 625°/s, inertia: A4: 8.9Nm/0.28kgm², A5: 8.9Nm/0.28kgm², A6: 3Nm/0.035kgm², installation dimensions: 283x283mm, control unit weight: 40kg, with control system. An on-site inspection is possible.

Total weight: 1,370 kg Load capacity: 210 kg Reach of the arms: 2,655 mm Control model: R-30iB Plus The robot is new and unused, on original pallet. Robot Options: 2 x Digital Input Assembly AID16D 2 x Digital Output Module AOD16D Software Option: Dual Check Safety (DCS) Position / Speed Check Function Software Option: Dual Check Safety SAFE I/O Connection Function Software Option: Touch Skip Function Software Option: Motion Package Software Option: User Socket Message

A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible.

liter capacity: 110 / 160 l tank: ca. 130 l total power requirement: 0,25 kW weight of the machine ca.: 0,13 t dimensions of the machine ca.: 1,4 x 0,45 x 0,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...

sheet width: 1270 mm plate thickness: 1.75 mm ST plate thickness: 2.00 mm ALU plate thickness: 2.50 mm KU thickness at Niro-steel: 0.80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60.0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm ajustment speed: 90.0 mm/sec working feed: 10.0 mm/sec return speed: 75.0 mm/sec stroke: 140 mm dayligth: 375 mm column arm: 250 mm table width: 90.0 mm work height max.: ca. 950 mm Number of working hours: 14.100 h total power requirement: 13.5 kW weight: 8500 kg range L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library - CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled g ...

width of the strips: 50.0 mm band length: 940 mm band speed: 3.0 - 22 m/min turning speeds: 1450 U/min tube diameter: 16.0 - 114 mm radius: 180 ° total power requirement: 4.75 kW weight of the machine ca.: 265 kg range L-W-H: 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180 (angle). - Manual work possible without feed - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 8 mm : 8 mm : 4.9 mm : 6 mm : 6 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...