127,904 used machines on RESALE, but how to find them? Machine Search
Faro Gage Plus 6-axis measuring arm Measuring arm length 4ft (approx. 1.2m) Accuracy 5+8L/1000μm with trolley, accessories and associated transport case Incl. software and operating instructions Never used/Unused - Mint
x-travel: 650 mm y-travel: 600 mm z-travel: 500 mm control: Sinumerik 840 D pl Siemens Main spindle:: turning speed range - main spindle: 20 - 28.000 min/-1 power capacity - main spindel: 23 / 18 kW max. Torque: 79 Nm tool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mm Swivel range: A: +30° / -115 ° rotatable: C: 360 ° max. table load: 500 kg max. workpiece sizes: Ø 630 x 313 mm table speed: A:25 / C:65 min/-1 Tool-Presetter:: number of toolpositions: 117 pos. max. tool diameter: 90 (125) mm max. tool length: 300 mm feeds:: rapid traverse ( X / Y / Z ): 60 m/min Accelaration: 10 m/s² feed power: 8,5 kN total power requirement: 43 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 8,5 x 5,5 x 3,0 m Documents: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 p ...
centre height: 175 mm grinding length: 400 mm grinding diameter: 350 mm control: Fanuc 0i-TD Resolution: 0,0001 mm grinding spindle head:: grinding wheel turining speeds: 3200 U/min grinding spindle - swivable: 0,15 -30 ° grinding wheel size: 500 x 63 x 203 mm peripheral speed: max. 50 m/sec power capacity: 11,5 kW workpiece spindle head:: Number of revolutions: 1 - 1.500 rpm power capacity: 1,8 kW spindle passage: 26 mm Fitting taper: MK 4 Tailstock:: taper of center: MK 3/4 quill stroke: 35 mm diameter of quill: 50 mm fine adjustment: +/- 0,04 mm axis stroke:: x-axis: 370 mm z-axis: 500 mm b-axis: 255 ° feeds:: feed speeds: X: 0,001 - 15.000 mm/min feed speeds: Z: 0,001 - 20.000 mm/min workpiece weight: 150 kg workpiece length - max.: 640 mm max. workpiece diameter: 349 mm total power requirement: 20 kVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,6 x 4,8 x ...
Fanuc + 3 Breton machining centers
Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: piecesï» ...
A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible.
Max. bending length: 1270 mm Max. sheet thickness: 1.75 mm steel Motorized upper bolster adjustment via foot switch Automatic backgauge
sheet width - max.: 1010 mm plate thickness: 4.0 mm ST plate thickness: 2.5 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: max. 20 Hübe/min cutting angle: 1.5 ° work height max.: 900 mm Control: ELGO total power requirement: 5.5 kW weight of the machine ca.: 2200 kg. from a maintenance workshop good condition () Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge Includes NC ELGO positioning control TYP 85 - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions Special accessories included: - Pneumatic holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fanuc Robot LR Mate 200iB + Fanuc system Robot control unit year of manufacture 2004
used
Battery Production Facility Manufacturer: Aumann Year: 2016 Condition: Used – good working condition 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14 ...
Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -
sheet width: 4040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: m Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal support Side fence and table extensions Cut length limiter Cut edge lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for John Deere 4400 and 4500 telehandlers, 13 teeth with 20.5 mm shaft diameter
Poclain travel motor, number: 05816293, code B2433OU, suitable for Bomag rollers
100 mm diameter pile driver suitable for Hammer HM100
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm
Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609
NEW, width: 188 cm, 570 kg dead weight, with Merlo ZM2 holder, volume: 1.50 m³
NEW, JLG Joystick, Part Number: 1600278
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: LAINOX Made in Italy Description Oracle is the ideal choice for a dynamic fast-paced restaurant with a wide variety of menus. Very fast cooking grilling toasting defrosting and regeneration of a wide range of fresh and frozen foods such as sandwiches pastries pizza fish vegetables and meat To achieve high performance technologies are used forced supply of hot air up to 3000 W convection from 95 ° C to 270 ° C microwaves up to 2000 W 7-inch touchscreen display memory for 1200 recipes 4-step programming of product preparation power 5.95 kW dimensions 358 x 743 x 578 mm
Faber SMESAMA Manual disk cutter 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph
Max. bending length: 2540 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: 3400 kg
Key data: 900 mm, 500 mm, 500 mm
Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm
2 FADIS hank winder / reeling machines type MR, year 1990 and 1988, 10 spindles / positions each machine
FAMAR THERMOFORMER, MODEL RM150 Thermoformer for the packaging of various products (tablets, soft or hard capsules, dragees, ampoules). Technical documentation available. Incoterm: EXW PRODUCTION Output: up to 100 blisters/min Film material: alu, paper, PVC Max reel width: 140 mm Max diameter of the thermoformable material reel: 400 mm Max diameter of the covering material reel: 200 mm Max forming depth: 15 mm Spacing: from 50 to 150 mm OTHER CHARACTERISTICS Machine size: 4460 x 1080 x 2260 mm Weight: 2000 kg ENERGY CONSUMPTION Power supply: 380 V + ground / 50 Hz; Absorbed power: 9 kW; Compressed air consumption: 200 l/mn
General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...
Key data: 1520 mm, 3 mm
Asymmetrical 3-roll round bending machine with 2 motors Lower roller crowned 110 mm diameter Upper roller (swing-out) crowned 90 mm diameter Rear roller (motorized adjustable with digital display) crowned 110 mm diameter Double footswitch Weight approx. 1200 kg
Key data: 2540 mm, 8 mm
Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Upper roller diameter: 200 mm Clockwise and counterclockwise rotation via footswitch Safety rope hoist Conical rounds possible Motorized rear roll infeed Lower roll feed via handwheel with position indicator Weight: approx. 4,500 kg
x-axis: 1000 mm y-axis: 500 mm z-axis: 500 mm dividing head: CNC Axles: 4 spindle taper ISO: 40 table surface area: 1200x508 mm Table load: 600 kg control: Fadal CNC 88 HS Number:: 9505858 turning speeds: 40-7500 U/min Tool changer: 21 Tool changer: 20-fach The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution o ...
Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer [manufacturer]: Favretto Type [ type]: MD 300 Control unit: DTG Plus / Siemens 840D Baujahr[construction year]: 10/2006 Table size: 3,220 mm Grinding travel length: 3,200 x 900 x 725 mm Magnetic table/plate size [magnetic table/plate size ]: 3,000 x 600 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic plate) Grinding wheel size: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Motor power of grinding mandrel: 22 kW Weight of the machine approx.: 17,500 kg Dimensions[machine size]: 9,400 x 3,550 x 3,000 mm Accessories: Magnetic tabletop [magnetic tabletop] coolant press with paper filter various grinding wheels [various grinding wheels] Documentation We will be happy to answer any furt ...
Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg
Robot pedestal for industrial robots The platform provides a stable and raised platform for the robot to ensure optimal positioning in the work area. Applications • Industrial robotics •Manufacturing processes • Material handling • Assembly and production lines Metrics: Mounting plate 1080 x 1030 mm Base plate 1230 x 1180 mm Material thickness: 25 mm Height: 700 mm More items - new and used - can be found in our shop! International shipping costs on request!
EDM machine Type: Robocut Alpha C600ia Manufacturer: Fanuc Year: 2014 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 300 mm Including clamping, 3D vice and filters Deionization 50L Machine in good condition, fully functional, under power Find more here - / Contact us at -
faceplate diameter: 6300 mm swing diameter: 7000 mm turning height: mm ram adjustment: mm cross rail adjustment - vertical: mm ram head - cross travel: mm ram swivable +/-: ° main drive: kW table revolutions:: 0 - 14 U/mn workpiece weight: 75 /125 t ram head dimension: mm total power requirement: 170 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 10 x 10 x 7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg
dimension of workpiece: 2400 mm voltage: 26,8 V : total power requirement: 26,8 kW weight of the machine ca.: 0,040 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mm grinding length: 540 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2015 wurde bei Studer der WSS, Reitstock und Werkstücktisch überholt 2024 Austausch KGT von X+Z- Achse durch Studer Kühlmittelanlage mit Magnetwalze Werkstückspindelstock Reitstock Meßsteuerung Auswuchtgerät Dittel Lünette PCU-Terminal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Parpas Omv FAS - 4 P Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 750 mm Max travel Z-axe: 700 mm Power on spindle: 2.2 kW Admission in boring head (ISO): ISO-40 Spindlespeeds: 80 – 3600 rpm Control: ECS AZ 200 CNC Weight: 8500 kg ACCESSORIES & TOOLING: yes Coolant pump: yes Toolholder: yes Number of tools: 20
We offer in the context of an insolvency liquidation: 2 x CNC lathe ( 1 x sub-spindle ( 1 x lower turret ), used + Bar feeder + Accessories 1 . CNC lathe with sub-spindle Make : MIYANO Type : BNC 34-S Year of construction : 1989 Control : Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chuck - 1 x 3 - Cheek chuck 2. CNC lathe with 2 x turret Make : MIYANO Type : JNC 45-T Year of construction : 1989 Control : Fanuc 0-T Bar Feeder HYDROBAR - 1 x collet chuck - 1 x 3 - Cheek chuck 3. Accessories - Approx. 65 x collet - Approx. 40 x Baking Sets - Various tool holders + tools -Documentation The machines are untested, but they were in use until the end. Sales are made ex site, loading can take place at an additional cost.
Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic
We offer in the context of an insolvency liquidation: 2 x CNC lathe ( 1 x sub-spindle ( 1 x lower turret ), used + Bar feeder + Accessories 1 . CNC lathe with sub-spindle Make : MIYANO Type : BNC 34-S Year of construction : 1989 Control : Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chuck - 1 x 3 - Cheek chuck 2. CNC lathe with 2 x turret Make : MIYANO Type : JNC 45-T Year of construction : 1989 Control : Fanuc 0-T Bar Feeder HYDROBAR - 1 x collet chuck - 1 x 3 - Cheek chuck 3. Accessories - Approx. 65 x collet - Approx. 40 x Baking Sets - Various tool holders + tools -Documentation The machines are untested, but they were in use until the end. Sales are made ex site, loading can take place at an additional cost.
maximum number of results exceeded
please refine your search
