133,386 used machines on RESALE, but how to find them? Machine Search
Battery Production Facility Manufacturer: Aumann Year: 2016 Like new 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14 cells) and LTO (36 cells) Find mo ...
Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - .ucymachines/ Contact us at - sales@ucymachines
100 mm diameter pile driver suitable for Hammer HM100
sheet width: 4040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: m Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal support Side fence and table extensions Cut length limiter Cut edge lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm
NEW, width: 188 cm, 570 kg dead weight, with Merlo ZM2 holder, volume: 1.50 m³
Max. bending length: 2540 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: 3400 kg
Key data: 900 mm, 500 mm, 500 mm
Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm
2 FADIS hank winder / reeling machines type MR, year 1990 and 1988, 10 spindles / positions each machine
FAMAR THERMOFORMER, MODEL RM150 Thermoformer for the packaging of various products (tablets, soft or hard capsules, dragees, ampoules). Technical documentation available. Incoterm: EXW PRODUCTION Output: up to 100 blisters/min Film material: alu, paper, PVC Max reel width: 140 mm Max diameter of the thermoformable material reel: 400 mm Max diameter of the covering material reel: 200 mm Max forming depth: 15 mm Spacing: from 50 to 150 mm OTHER CHARACTERISTICS Machine size: 4460 x 1080 x 2260 mm Weight: 2000 kg ENERGY CONSUMPTION Power supply: 380 V + ground / 50 Hz; Absorbed power: 9 kW; Compressed air consumption: 200 l/mn
Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg
faceplate diameter: 6300 mm swing diameter: 7000 mm turning height: mm ram adjustment: mm cross rail adjustment - vertical: mm ram head - cross travel: mm ram swivable +/-: ° main drive: kW table revolutions:: 0 - 14 U/mn workpiece weight: 75 /125 t ram head dimension: mm total power requirement: 170 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 10 x 10 x 7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimension of workpiece: 2400 mm voltage: 26,8 V : total power requirement: 26,8 kW weight of the machine ca.: 0,040 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.95 m, Overall length= 1.55 m, Overall width= 1.32 m, Net weight= 577 kg,
sheet width: 2040 mm plate thickness: 4,00 mm distance between columns: mm upper beam stroke: 350 mm total power requirement: kW weight of the machine ca.: ca.4,00 t dimensions of the machine ca.: m Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Upper jaw stroke height and material thickness selectable via DIP switches Bending rail in excellent condition Manual backgauge with spring fingers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A cassette set of bending tools for FASTI MAK
Fatosa 120L Cutter The Fatosa 120L Cutter is a great asset for professionals looking for a reliable and efficient solution. Indeed, its spacious bowl allows a homogeneous mixture of various materials, whether meat, vegetables or even more delicate preparations. In addition, its fast-turning knife system preserves the texture and freshness of the ingredients, which fully enhances the quality of your products. Secondly, the stainless steel design ensures optimal hygiene, while facilitating cleaning operations. This saves you time and meets the most demanding health standards. In addition, the intuitive control interface allows precise adjustment of the cutting speeds. In this way, you can adapt the fineness of the chopping according to the characteristics of each recipe without losing efficiency. In addition, the ergonomic design reduces the strain on operators, who can quickly access ...
Two interconnected block bag packaging and sealing machines Fawema are available. Documentation vorhanden. A visit on site is possible. Expected to be available from August 2026.
power capacity: 30/37 kW volt: 380 V ampere: 70/78 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of construction 2006 Control Fanuc 18iS-WB Travel X/Y/Z/V/U 550/370/310/120/120 mm i-Plus high-performance generator Wire system: AWF system for automatic and safe threading. Start hole search function, threading in the cutting gap, short circuit Alarm function Equipment:Dielectric cooler, coolant tank, Aut. Rotary Insertion, Interface RS 232, El. Handwheel, Manuals Stenter frame: Erowa Please ask for price and pictures! This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. No returns for used goods. 3 months warranty.
Key data: 110 mm
HBM HWCa-110, new in 1965
working diameter: 140 mm turning diameter: 185 mm workpiece length: 120 mm control: Siemens turning speeds: 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
- Number of baking plates: 76 - Output: approx. 4000 pieces / hour - Cone size: max. 195 mm Equipment: - Incl. winding head - incl. Stacking table - incl. cooling band
Fasti 2040 x 5 mm Number of rolls: 3 rolls Roll capacity cold: 2040 x 5 mm Roll dia upside: 160 mm Power needed: 7,5 HP Length: 3250 mm Depth: 900 mm Hight: 1300 mm Weight: 3100 kg
Type: 108 Number of rolls: 3 rolls Roll capacity cold: 2540 x 2,5 mm Roll dia upside: 140 mm Dia under roll - side rolls: 140 mm Power needed: 5 kW Weight: 1760 kg
Type: 230 Maximale buighoek: 180° Max worklength: 2040 mm Max tickness: 1,5 mm Distance between clampblock -- ram: 100 mm Eletric motor (power): 0,75 kW Weight: 1000 kg
De plaatdikte is afhankelijk van het profiel. dop: 0,5 gt; 1,5 mm 7 stations vermogen: 2,4 kW gewicht: 430 kg
17 pieces of new- never used in original packaging ball bearing for ink and dampening rollers number: 6002.2RSR. Can send worldwide.
serial number: 70212008 weight: 3,3 t working width: 2040 mm : 4 length: 2900 mm width: 1890 mm height: 1780 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...
Height=2.28 m, Overall length= 1.82 m, Overall width= 1.47 m, Net weight= 680 kg,
Height=1.87 m, Overall length= 1.2 m, Overall width= 1.42 m, Net weight= 557 kg,
This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information.
This FANUC ARC Mate OiB robot arm was manufactured in 2015. It features a maximum load capacity of 3kg. Consider the opportunity to buy this FANUC ARC Mate OiB robot arm. Contact us for more information.
This 6-axis FANUC R2000iB/165F robot arm was manufactured in 2013. Ideal for automation tasks, it enhances precision and efficiency in production lines. Consider the opportunity to buy this FANUC R2000iB/165F robot arm. Contact us for more information.
This 6-axis FANUC M-16iB robot arm was manufactured in 2005. Ideal for automation tasks, it enhances precision and efficiency in operations. Consider the opportunity to buy this FANUC M-16iB robot arm. Contact us for more information.
This 6-axis FANUC Robot M20iA 35M was manufactured in 2017. It features a maximum payload capacity of 35KG and a reach of 1813 mm, ideal for tasks requiring precision and strength. Consider the opportunity to buy this FANUC Robot M20iA 35M robot arm. Contact us for more information.
This FANUC M-2000iA/1700L was manufactured in 2018. A robust and reliable piece of equipment, its ideal for those looking to enhance their automation capabilities. Consider the opportunity to buy this FANUC M-2000iA/1700L. Contact us for more information.
maximum number of results exceeded
please refine your search
