fa weber used for sale

Refer to code 1131 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 21000, 11000, 13000, 2000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 12000, 14000, 15000, 16000, 17000, 18000, 19000 Nominal / outsid ...

POMINI-FARREL / POMINI Laboratory Tangential Mixer PL1,6 Refer to code 1144-1014 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Pallet racking, as good as new 108 pitches Multiple available. Manufacturer: Jungheinrich Type: B Specifications: 10 stand frames, approx. 4,500 x 1,100 mm 36 supports, approx. 3,600 x K125 mm mm 72 locking pins Shelf load is 1,600 kg (with evenly distributed load). 2.773,11 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

Refer to code 1178 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

spindle diameter: 140 mm x-travel: 12500 mm y-travel: 3000 mm z-travel: 800 mm tool taper: ISO 50 dimension of the ram: - mm turning speed range - spindle: 1000 U/min main drive: - kW table surface area: 3000 x 2100 mm V-axis: 1500 mm table load: 25 t control: TNC 420 total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m equipped with - CNC control Heidenhain TNC 430 - NC rotary table 3000 x 2100mm, 25t - Telescopic steel sheet covers - Panel field (several sizes) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. format 52 x 72 cm Year of manufacture 1987 2 printing units + high pile delivery Shed Feeder Suction belt table photoelectron. Side edge control pneumatic side marks Conventional dampening units Plate quick-clamping rails Dry pollinator Grafix Exactomat Stack delivery Reading totalizer: approx. 61 million pressure Delivery date: immediately Price on request. We supply and install worldwide.

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

Laser power: 3,000 watts Type: A04B-0820-B342 Weight system: 750 kg Dimensions LxWxH: 205 x 75 x 120 cm Equipped with: -Stabilizer - Fanuc Power Converter DTU60/2/0/5S - CNC control Fanuc Series 31i-LB

Manufacturer: Bürkle Hymmen, Type: Lackierstrasse für Faserzementplatten, Year: 1993-2001, Finished product: Decklackierung, Work piece width min-max mm: 30-1300, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 10-25, Düsentrockner1: Vorwärmung, Lackwalze 1: Hymmen TLX, IR-Trockner 1: 6 Lampen, Lackwalze 2: Hymmen TLX, IR-Trockner 2: 6 Lampen, Lackwalze 3: Hymmen TLX, UV Trockner 3: 3 Lampen 80 watt, Year :1993-2001

Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous adjustable: yes, Feeding speed continous adjustable: yes, Year :2007

Machine for making plastic sleeves for bottle etc. Sleeve width 20 -200 mm Speed 200 m/min Accessories: 2 containers for solvents,  Extraction with blower, Perforation

Key data: 1270 mm, 2 mm

Max. bending length: 1270 mm Max. sheet thickness: 2.25 mm steel Bending rail ground Manual backgauge 1200 kg

Key data: 4 mm, 1500 kg

Fasti Beading Machine Size 4 150x 4mm Power max projection 500mm hydr. Feeding of the upper roller by foot switch Right-left rotation Nkebmd R E Ijv Tqy Njgsw Stepless speed adjustment by handwheel Holder 60mm Weight approx. 1500kg with accessories Built in 1963 Space requirement approx. 1000x1000x1750mm

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Weight: approx. 500 kg

Description Heating floors with jelly molds for baby food in melanin. Compression molding of elastomers and thermosets. CE declaration of conformity. Features: -Sized heated platens: 700x500 mm -Opening molds max.:620 mm -stroke mobile max.: 500 mm -Come closure adjustable (mold): 300-3000 kN -Pressure : 235 bar - copression speed, force max. (adjustable): 300-3000 kN -Power top hot floor: 6kW -Power less warm floor: 6 kW -Temperature hot plate : 50-250 °C -height work plan: 1530 mm from the floor ( a platform of 400 mm with guards is reccomended)

Tos FA5AV X: 1400 - Y:420 - Z: 400mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 400 mm Admission in millinghead: ISO 50 Table size: 1600 x 400 mm Power needed: 20.5 kW Weight: 5300 kg

A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible.

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

Drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units each with 1667W, 400 V ( length 2360mm ) Air flow for this system is: 3m3 /sec or 10.000m3 /hour 2 fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

current capacity: . kVA number of controlled axis: . workpiece weight: . kg : 50 zehn verschiedene Vers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc Series 180iS-WB Travel: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, max. workpiece weight 500 kg, Kdswswl Hiiovu Nu Iol Machine weight 1,700 kg, Power supply 13 KVA Machine can be viewed under power.

Universal Crimping Machine, Border FASTI Type 81504 - UBPB 1,5Masch. No. 828152 001 Year of construction 1982Sheet thickness max. 1.5 mmPlate thickness min. 0.5 mmBoard height max. 12 mmBoard height min. 4 mmThroughput speed 4 / 8 m/min. Roll diameter 60 mmmin. Inner radius of curvature for 90 elbow piece 100 mmDrive power 1.1 / 1.4 kWNerg connection 400 volts, 50 Hz- Sheet metal guide- Operating instructions (as copy)Space requirement L x W x H 700 x 610 x 1250 mmWeight 150 kg; used

Motor-driven circular shears FASTI type 502 - 10 - 2Masch. No. 9252 009 Year of construction 1992Material thickness max. 2 mm (400N/mm²)Maximum blank diameter 1000 mmMinimum blank diameter 100 mmCutting shaft speed 60 and 120 rpmCutting speed 12 and 24 m/min. Knife holder 20 mmKnife diameter 65 mmProjection of the clamping plate 720 mmProjection of the cutting wheel 280 mmMotor power 1.1 / 1.4 kWWeergized connection 380 volts, 50 Hz- 2 motor speeds- mechanical clamping tip-

workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible.

saw blade diameter: 275 mm capacity 90 degrees: round: 80 mm capacity 90 degrees: square: 70 mm capacity 90 degrees: flat: 100 x 60 mm capacity 45 degrees: round: 70 mm capacity 45 degrees: square: 60 mm capacity 60 degrees: flat: 80 x 50 mm clamping range: 110 mm turning speeds: 45 / 90 U/min dimensions of saw-blade: mm total power requirement: 0,5 kW weight of the machine ca.: 0,07 t dimensions of the machine ca.: 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure., Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Grinding wheel holder:: HSK 50 E, Diamond grinding wheel diameter: 50 - 250 mm, max. width of grinding wheel: 70 mm, Grinding wheel bore diameter: 20 mm, Speed of ...

Suitable for dressing and profiling diamond and CBN grinding wheels., Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 LCD monitor and Ruvision software, On-board PC with Windows and 17 monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor., Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wh ...

Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22 - Backlight : upgrade to vertica ...

Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories:, Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 19” LCD monitor (microscope with zoom 15‐70X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Protection cover., Specifications: Wheel spindle taper: HSK50E (alternatives possibl ...

A coolable (isolated) Fabdec milk tank is available. Volume: 10000l, length: approx. 3000mm, diameter: approx. 2200mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A cooling unit is not included.

A dust extraction system is available. 1) Filter unit FAV FSR219/200-FDK, year of construction: 2019. 2) Fan intensive filter RM 50-N-60, air volume flow: 20000m³/h. 3) Intensive filter fan RM 28-N-45, air flow rate: 6900m³/h. 4) Fan intensive filter RM 50-N-60, air flow rate: 20000m³/h. Documentation available. On-site inspection is possible.

sheet width: 2500 mm plate thickness: 3 mm distance between columns: 2540 mm total power requirement: 9 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,5 x 3,5 x 2 m No. 5120 Swivel bending machine FASTI 212 Working area: 2500 x 3 Sheet support behind the machine Space requirement approx. 4 x 4 (2) x 2 m Weight approx. 5.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 150-500 Grad basket dimensions: 300x210x460 mm total power requirement: 2.6 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 0.80x0.60x0.95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 560 mm width: 670 mm height: 890 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible.

sheet width: 1000 mm plate thickness: / mm plate length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A lightly used Faraone order picking machine is available. Working height: 5150mm, max. platform height: 3150mm, platform load capacity: 200kg, nominal shelf load capacity: 100kg, number of persons: 1, tare weight: approx. 640kg. Documentation available. On-site inspection is possible.

plate width: 3200 mm plate thickness: 83 mm pre-bending: 72 mm roll diam. toproll: 700 mm roll diam. bottom roll: 650 mm side roll diameter: 550 mm distance between columns: 3300 mm roll drive: 93,2 kW turning speeds: 2 - 4 m/min total power requirement: - kW weight of the machine ca.: 78 t dimensions of the machine ca.: 9 x 3,3 x 3,4 m 4 –Roll Bending Machine - 4 roll Pinch bending - Pre-bending - Tilting function -- Hydraulic front bearing tilting speed: 450mm/min -- Hydraulic tilting of top roll: 250mm/min - CE 2 Units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Name: FANUC Servo Motor Model OM Manufacturer: FANUC (Tokyo, Japan) Type: A06B-06 Country: Japan Short Description: Original FANUC servo motor model OM with integrated encoder.

Name: FANUC OM Series Servo Motor Manufacturer: FANUC (Japan) Type: M 472128 L × W × H: ~ 325 × 170 × 140 mm Weight: ~ 12.10 kg

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A

turning diameter: 320 mm turning height: 180 mm Control: SIEMENS 840 D chucking diameter: 315 mm 0: 4.000 U/min : 1.000 / 280 mm rapid power traverse in X-and Z direction: 60/30 m/min tool turret with 12 work positions: VDI 50 total power requirement: 65 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: 5,5 x 3,2 x 3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.