fa weber used for sale

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A

pneumatische Ösenmaschine / pneumatic Eyeletting machine Falzoni F401.9.S21

Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter

2020 Neumaier Industry Factory Train FT830 Route tugger train. DESCRIPTION: The object of realisation is a Factory Train FT830 tugger train from the company Neumaier Industry Description: - The tugger train was only used a few times / year of construction 2020 - Unladen weight 3578 kg / permissible total weight 7178 kg - Payload 3600 kg / 1800 kg per wagon unit on 3 pallets or transport trolleys - Length 10.8 m, width 1.6 m, height 2.3 m - Active steering system - Electronic braking system Main components: - FT830 initial module - EV6 frame Goods carrier - Main module FT830 - EV6 frame product carrier - End module FT830 Current condition / photo documentation: Find more here - .ucymachines/ Contact us at - sales@ucymachines

sheet width: 3000 mm plate thickness: 6,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,50 t dimensions of the machine ca.: m Motorized back stop with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2040 mm, 1 mm

with rebate groove in the upper shaft, with steel wheel and scale, solid, stable construction, with wire inserts, 70 mm feed of the rear roller, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2040 mm Sheet thickness: 1.0 mm Colour: green Machine weight: 600 kg Dimensions: 2200 x 650 mm Diameter:. 70 mm Machine number: 8413105

This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information.

Specifications: Working length: 3240 mm Bending capacity steel: 4.0 mm Bending capacity stainless steel: 3.0 mm Bending capacity aluminum: 8.0 mm CNC control: SIEMENS Simatic HMI Bending angle adjustment: 0 – 150° Upper beam opening: 350 mm Infinitely variable bending speed Programmable Backstop Hydraulic upper tool clamping Motor power: 7.5 kW Dimensions (length x width x height9: approx. 5000 x 2450 x 2200 mm Weight: approx. 7 to

Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Low-maintenance BATES robot palletizing cell for bags: + Take-off belt with square rollers, new + FANUC robot incl. control cabinet and teach pendant, overhauled + Platform for robots, new + Gripper for bags, new + Security fence incl. light barrier, new + 1 or 2 full pallet spaces + Bag dimensions/sizes e.g. flour 10.0 kg - 50.0 kg + Standard pallet sizes + Turnkey from the workshop + CE + Warranty Options: o Bag transport o Empty pallet magazine o Pallet transport o Grippers for pallets, cartons, crates, packages, buckets, hobbocks, etc. o Assembly o Commissioning

Fasti MFC 200

SCHRÖDER-FASTI SFT 528-30/6 hydraulic guillotine shears were built in Germany in 2009. Throughout its service life, the machine has been regularly serviced by the manufacturer. The SCHRÖDER-FASTI SFT 528-30/6 is designed for the precision cutting of sheet metal with a maximum length of 3040 mm and a thickness of 6 mm. Cutting is performed using cutting knives with high wear resistance that ensure consistent results even during intensive operation. The knife angle can be adjusted within a range of 0,5° to 2,2°, allowing the cutting parameters to be adapted to the type of workpiece. SCHRÖDER-FASTI guillotine shears are also equipped with an intuitive CNC controller that streamlines machine operation and the programming of operating parameters. All this is complemented by a robust design with a powerful 7,5 kW motor. Technical specifications of the SCHRÖDER-FASTI SFT 528-30/6 g ...

Refer to code 1131 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Conveyor belt width 600 mm -Conveyor length: 2570 m -Voltage: 380V -Transport dimensions: 2600/690/H1225 mm -Weight: 120 kg

POMINI-FARREL / POMINI Laboratory Tangential Mixer PL1,6 Refer to code 1144-1014 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1178 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

wire EDM machine, year 2006. Used machine. More info & price on IndustrialBuyer.

max. format 52 x 72 cm Year of manufacture 1987 2 printing units + high pile delivery Shed Feeder Suction belt table photoelectron. Side edge control pneumatic side marks Conventional dampening units Plate quick-clamping rails Dry pollinator Grafix Exactomat Stack delivery Reading totalizer: approx. 61 million pressure Delivery date: immediately Price on request. We supply and install worldwide.

A mechanical crank-operated guillotine shear with a cutting length of 2040mm is offered. Max. sheet thickness: 3mm. Max. sheet material strength: 400N/mm². Equipped with: Foot pedal operation, backgauge with handwheel adjustment, front support arms. Weight: approx. 2300kg. The cutting blades have been incorrectly ground. Reworking is required. Viewing possible by appointment.

Key data: 4 mm, 1500 kg

Fasti Beading Machine Size 4 150x 4mm Power max projection 500mm hydr. Feeding of the upper roller by foot switch Right-left rotation Nkebmd R E Ijv Tqy Njgsw Stepless speed adjustment by handwheel Holder 60mm Weight approx. 1500kg with accessories Built in 1963 Space requirement approx. 1000x1000x1750mm

Drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units each with 1667W, 400 V ( length 2360mm ) Air flow for this system is: 3m3 /sec or 10.000m3 /hour 2 fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Universal Crimping Machine, Border FASTI Type 81504 - UBPB 1,5Masch. No. 828152 001 Year of construction 1982Sheet thickness max. 1.5 mmPlate thickness min. 0.5 mmBoard height max. 12 mmBoard height min. 4 mmThroughput speed 4 / 8 m/min. Roll diameter 60 mmmin. Inner radius of curvature for 90 elbow piece 100 mmDrive power 1.1 / 1.4 kWNerg connection 400 volts, 50 Hz- Sheet metal guide- Operating instructions (as copy)Space requirement L x W x H 700 x 610 x 1250 mmWeight 150 kg; used

Motor-driven circular shears FASTI type 502 - 10 - 2Masch. No. 9252 009 Year of construction 1992Material thickness max. 2 mm (400N/mm²)Maximum blank diameter 1000 mmMinimum blank diameter 100 mmCutting shaft speed 60 and 120 rpmCutting speed 12 and 24 m/min. Knife holder 20 mmKnife diameter 65 mmProjection of the clamping plate 720 mmProjection of the cutting wheel 280 mmMotor power 1.1 / 1.4 kWWeergized connection 380 volts, 50 Hz- 2 motor speeds- mechanical clamping tip-

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap) Frame width (NB): 800 mm Belt width (GuB): 600 mm Construction height (BH): 435 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor belt Side guide distance: 655 mm Maximum recommended package size: 600 x 450 mm Optionally available: Supports to increase the delivery height Frequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1380 Nominal / outside width in mm: 800 Belt width in mm: 600 Driven: YES Engine type: SEW Getriebemotor KW: 0,25/S1, 0,37/S1 scope of delivery: including side g ...

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A lightly used Faraone order picking machine is available. Working height: 5150mm, max. platform height: 3150mm, platform load capacity: 200kg, nominal shelf load capacity: 100kg, number of persons: 1, tare weight: approx. 640kg. Documentation available. On-site inspection is possible.

FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 1090 mm Nominal/outer width (NB): 630 mm Belt width (GB): 500 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 1090 Nominal / outside width in mm: 630 Belt width in mm: 500 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpa ...

FAS belt conveyor 850-530-400 RA2427 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 850 mm Nominal/outer width (NB): 530 mm Belt width (GB): 400 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 850 Nominal / outside width in mm: 530 Belt width in mm: 400 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartn ...

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

FAS conveyor roller curve 90° 635-500 IR850 RA1990 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 635 mm roller width (NUB): 500 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor Engine power: kW 0.15 S1 Hz 50 Funding speed: 0.93 m/sec Drive: Center drive usable width: 500mm The rolls are higher than the frame Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 850 Nominal / outside width in mm: 635 Roll width in mm: 500 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,15 Conveyor speed m / s: 0,93 scope of delivery: without supports and side guides Für eine  ...

Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible.

Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment

Travel X/Y/Z: 500mm/400mm/500mm, table dimensions X/Y/Z: 750mm/500mm, max. table load: 900kg, tool holder: CAT40, spindle speed: 7500rpm, spindle power: 11kW, tool positions: 21, feed: 5m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: 2100mm/2300mm/2650mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible.

Height=1.33 m, Overall length= 0.8 m, Overall width= 3.1 m, Net weight= 495 kg,

Coolant pump, stainless steel coolant reservoir, coolant pump, expansion tank -Expansion tank: Stainless steel tank for coolant, divided into 3 sections -Connections/Division: see photos -Container: with fill level indicators -Tank dimensions: 750/300/H250 mm -Overall dimensions: 950/330/H365 mm -Weight: 31 kg

CNC control in the control panel / machine operating terminalCNC path control FANUCTtype A14B - 0048 - 0002Year of construction: 1990- Machine control panel- electronic handwheel- Flexible silicone PC keyboardDimensions WxHxD: 600 x 260 x 350 mmWeight: approx. 40 kgComes from a GILDEMEISTER CNC lathe.From stock, function not tested, ideal as a spare parts carrier.; used

Pneumatic folding bending machine FASTI Type 606 - 11 - 1.0Folding machine for sheet metal folding pre-bendingFor making a fold bendFolding bending machine for thin sheet metal instead of press brakeFabr. No. 9166002 year of construction 1991Working length: 1100 mmMaterial thickness at 45 kg/mm² 1 mmCompressed air requirement 6 bar- pneum. Foot switch roller infeed via threaded toggle screwsSpace requirement L x W x H 1600 x 300 x 1050 mmWeight approx. 250 kggood conditionThe fold is the doubling of the sheet metal in the edge area, i.e. 1x folded around the

4 pieces damping elements BILZMachine feet, oscillating elementsType Faebi 430 HDBeload 27500-65000 NBload 2750-6500 kgWorking height: 95 mmBase plate: 500 x 500 mm x 10 mmSupport diameter: 315 mmNominal diameter 480 mmAir pressure: max. 6 bar- Fastening thread M20 in the center of the damper- Damper with two-chamber systemvery good conditionIdeal for press, punching machine or punching nibbling machines.Weight per piece: 53 kggood condition; used

6-Axis AC Servo Drive, Servo Actuator, Servo Inverter, Servo Amplifier, Servo Controller, Frequency Converter, Drive Controller for RobotFANUC Type A06B-6105-H003No. V07Z08282NEU / unusedInput voltage: 200 - 240 VACNornpower: 1.5 kWAnnumber of axis outputs: 6Output current: 6 x 13 AGtotal output current: max. 78 AManual No.: B-81465Standard: EN50178Installed circuit boards: A16B-2000-0063/07D A16B-3200-0440/05C- Plexiglass cover not includedDimensions W x H x D 70 x 170 x 380

Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used

Height=1.14 m, Overall length= 0.52 m, Overall width= 0.52 m, Net weight= 140 kg,

Hydraulic guillotine shears FASTI type 509 - 25/4Masch. No. 5418 Year of construction 1991Cutting length 2535 mmCutting thickness 4 mmBack gauge 5-1000 mm (controlled)Cutting angle adjustableHydraulic pressure max. 290 barMotor power 7.5 kWNeching connection 400 volts, 50 Hz- Back gauge with positioning control ELGO ELECTRIC Type 85- Sheet metal holding device under the back gauge- Manual cutting gap adjustment with dial gauge display on the right and left- Stepless cutting length adjustment- Hydraulic

Roaches 3 Bath Laboratory Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Height=1.54 m, Overall length= 0.63 m, Overall width= 1.1 m, Net weight= 160 kg,

Roaches 3 Bath Laboratory Glass Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 240 V 6500 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Height=1.99 m, Overall length= 0.81 m, Overall width= 1.52 m, Net weight= 310 kg,

Year of retrofitting: 2025, Maximum distance between points: 1000 mm, Max distance between points: 1000 mm, Max travel Z axis: 650 mm, Max. Z-axis travel: 650 mm, Max. travel X axis: 254 mm, Max travel X axis: 254 mm, Height of points: 175 mm, Ø max to rectify: 350 mm, Main engine power: 7.5 Kw, Max. diameter to be rectified: 350 mm, Max. piece weight: 130 Kg, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi-TF PLUS, Dimensions of the grinding wheel: Ø500 x Ø203 x 80 mm, Angle of tilt of the work spindle head: + / -8,5°, Long: 2500 mm, Grinding wheel dimensions: Ø500 x Ø203 x 80 mm, Width: 2300 mm, Height: 2000 mm, Weight approx.: 3500 Kg, Angle of inclination of the work wheel head: + / -8.5°