133,959 used machines on RESALE, but how to find them? Machine Search
saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 330 x 40 mm capacity 45 degrees: round: 140 mm capacity 45 degrees: flat: 250 x 40 mm cutting speed: 10 - 70 m/min saw head feed: 0 - 1000 mm/min sawing motor: 1,7 / 2,6 kW weight of the machine ca.: 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Knapp roller conveyor accumulation 1100-510-450 RA2382 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 1100 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 Conveying length in mm: 1100 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Stowag ...
Knapp roller conveyor accumulation 2160-510-450 RA2381 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 2160 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Jam detection: Lichtschranke Convey ...
Knapp roller conveyor accumulation 12720-510-450 RA2379 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 12720 mm in 7 Elements. Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller conveyors Drive: 30mm Belt Height frame: 90 mm Conveyor speed: 0,5m/s Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 Conveyor speed m / s: 0,5 Roll division in mm: 60 Jam detection: Lichtschranke Construction year: 2022 Engine type: SEW Getriebemotor Conveying length in mm: 12720 Stowage spaces: 23 For individual, expert ...
Knapp roller conveyor 540-510-450 RA2384 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 540 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 540 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
Knapp roller conveyor 570-510-450 RA2383 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 570 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides ...
Knapp roller conveyor 600-510-450 RA2385 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 600 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
Knapp roller conveyor 510-510-450 RA2386 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 510 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 510 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
Knapp angled roller conveyor 600-510-450 RA2387 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V condition: Ausstellungsstück Construction year: 2022 angle: 7,7° Conveying length in mm: 600 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For ...
Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,
Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,
Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976
LANG Technik Makro-Grip / Quick-Point Clamping System Package 2 pieces of these units available 1x LANG Makro-Grip 125 Vise Type 47205 1x LANG Quick-Point 96 Single Plate Type 45400 1x LANG Quick-Point 96 grid plate type 45763 1x LANG Quick-Point 96 substructure 100 mm type 44100 High-quality clamping technology package from LANG Technik for professional use on CNC machining centres. The system is ideal for 5-axis machining and, thanks to the modular Quick-Point zero-point clamping system, enables short set-up times and high repeatability. Pros: Precise and reproducible workpiece clamping Optimal accessibility in 5-axis machining Fast changeover thanks to quick-point zero-point technology Robust industrial design Compatible with other LANG components Condition: Used, fully functional. Normal signs of use from ongoing production. Viewing possible by arrangement. ...
Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1950 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...
Welding frame dimensions: 450x550mm, applicable films: POF/ PP/ PE/ PVC, max. film thickness: 50μm, weight: approx. 150kg, with Nero shrink tunnel system TBS PACK STA-3528 and documentation. On-site inspection is possible.
Top and bottom sander Usefull width: 435 mm. Sanding units top: Roller 7,5 kW, Pad 5,5 kW bottom : Roller 7,5 kW, Pad 5,5 kW Sanding belt sizes: 455 x 1900 mm. Workpiece thickness: 5 - 200 mm Min workpiece length: 320 mm. Feed speed of the carpet: 8 and 16 m/min, motor 2,2 kW
Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg R410A refrigerant. 970 g 3 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.
Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details.
Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible.
honing diameter: 90 mm stroke: 490 mm throat: 400 mm total power requirement: 10 kW weight of the machine ca.: 3.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.5mm | tunnel size WxH: 450x250mm | max. passing size WxH: 410x210mm | power: 220V/0.45kW, 50Hz/60Hz | dimensions and weight: L1800xW800xH950mm, 180/280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine.
-Noise Rating: 55 dB at 7m; Gross weight [kg]: 1300; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500
Fully automatic timber feed with feed roller conveyor Extension of the feed cross conveyor and feed roller conveyor for timber lengths up to 13 m Feed and feed cross conveyors Under-table swivel cross-cut saw Universal milling unit 4-axis (UF4) Combined support for vertical tools Drilling rig 2.2 kW Combined support for horizontally working tools Drilling rig 2.2 kW Longitudinal and transverse groove milling machine Rear marking device (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for timber conveying incl. extension (without drive) Component ejectors Wooden shelf 5-arm Safety devices and enclosures
AZO rotary vibrating sieve, New motor, Sold with 6 synthetic screen sleeves, 0,2 mm, 0.5 mm, 0,6 mm, 1.4mm, 1.4 mm, 1.5 mm, Elec: 400 V, Engine power: 1,5 kW, Sieve entrance: 250x250, Entry Sieve: 250x250, Sieve diameter:: 175, Sieve length: 340, Screen length: 340
CNC lathe, year 1999, CNC 18 - T. Used machine in good condition. More info & price on IndustrialBuyer.
On offer is a used, functional 40-foot refrigerated container from the manufacturer NARU. Technical data Manufacturer: NARU Model No.: 45R1 Type: IAAA-S-010 Year of Make: 2008 Dimensions: length 12.3 meters, width 2.44 meters, height 2.90 meters Volume: 67.36 m3 The container is currently at our customer's site near Magdeburg and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Likewise, any professional dismantling and loading of the asset would be the responsibility of the buyer. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The buyer must also dismantle the assets professionally. ...
Sawblade tiltable: 0-45 ° Length of the rolling table: 3350 mm cutting width: 1100 mm Motor output: 5,5 kW Cutting height: 155 mm Cutting height at 45°: 110 mm Saw blade diameter: 450 mm Speed: 3000 | 3600 | 4200 U/min. weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-510-450 RA2417 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: nominal voltage: 24V, 380-500V Construction year: 2015 condition: Ausstellungsstück Conveyin ...
Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg
Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...
Manufacturer: PRO-WAM Type of Machine : Process tank 450 L Year of Manufacture: 2019 Volume: 450 liters Tank used several times, like new, in very good condition, on wheels. Pressure up to 2 bar, with mixer and heating jacket, made of AISI 316Ti acid-resistant steel. Additionally, two UV light radiators were designed for the tank, mounted from the top through sight glasses. Process tank 450 l - vertical tank - pressure tank up to 2 bar - main tank made of AISI 316Ti acid-resistant steel - tank insulated with mineral wool, thickness 50 mm in the cylindrical part and on the lower head - outer jacket made of AISI 316Ti acid-resistant steel, thickness: 2mm - lower and upper cap pressed DIN 28011 - heating jacket with a capacity of 6 L - temperature in the tank and jacket 100 degrees. c - circulation pump - heating medium temperature sensor - expansion vessel of the heating system - ele ...
RA1188 Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Features: Running direction: LINKS, RIGHT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 1220 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES KW: 0,37/S1 Conveyor speed m / s: 0,35 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbind ...
Extruder S 45/22D. Single head, machine can also be equipped with double or triple head. With external leak tester. Very good condition
Extruder S 45/22D. Double head 70mm stitch, machine can be equipped with single head. Good condition
maximum number of results exceeded
please refine your search
