f 45 used for sale

System: Used decanter / centrifuge Manufacturer: Flottweg Model: full coat screw centrifuge Type: Z53-4/454 . No.: 007-135-03 B.: 1999 Drum: max speed. 3250 min-1 Drum inner diameter: 529 mm Drive motor drum: Lander Type: ANGA-225ME-04A Voltage: 400 V Service: 55kW, 105A, 1465 U/min Hyraulikaggregat: Loher 1450 RPM Buying and renting possible.

To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are choiceable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

General SKU226Y120 MakeMBR Bio Reactor Serial8066 / 1099-F-2000.M Type450 l. Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket5 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume450 Ltr. Motor5.5 KW Specified Features - Bioreactor Reactorcheck Capacity450 l. Vessel sizesDia. 500 x 1600 mm Top connectionscheck OutletDN35 With jacket( 29 l.) Max. temperature+150°C With propellor stirrerRushton-turbine Motor5,5 kW (400 V, 1440 rpm) With jacketcheck Bioreactors MaterialStainless steel 1.4435 (316L) General Year of construction2000 LocationBarneveld Floorspace3,3 x 1,2 m Total height3 m Weight2500 kg Extra information WIth: - Reactor: 100 l., Dia. 350x850 mm pressure vessel: 3,2bar,  jacket 5 bar. Max. temp.: -10/+150°C, outlet DN35,stirrer: Rushton-turbine, 0,75kW, 400V - 2x heat exhanger: alfa laval, ...

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

6 feeders

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

asdfasdfasdf

Used Grasso FKS PP 450/S water cooled chiller on Ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor - 50 Hz - 110 kW - 2970 RPM, brazed heat exchanger as evaporator, brazed heat exchanger as condenser, Grasso oil separator with a volume of 275 liter, oil cooler, oil pump and a control cabinet with a Siemens Simatic HMI controller. Capacity based on a cold water inlet/outlet of 12°C/6°C and a cooling water temperatures of 27°C/32°C. Specifications: Brand: Grasso Type: FKS PP 450/S Product type: Water cooled chiller Capacity kW: 445,0 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Capacity tons: 126,5 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Refrigerant: R717 Weight in kg: 5200 Sizes: 3400x1900x2400 mm (LxWxH) Compressors: Grasso HMR-H36S-28  ...

Asphalt paver Fortress Allat 450P. maximum width 3m. Two conveyors.

Festo pneumatic cylinders Pmax 12 Bar End positions with slot nuts Length 92 cm

refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor -Power: 5.5 kW -Speed: 1415 rpm Quantity: 1 piece available -Dimensions: 450/500/H560 mm -Weight: 150 kg

refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor -Power: 5.5 kW -Speed: 1415 rpm -Dimensions: 450/500/H440 mm -Weight: 80 kg

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 2000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000, 21000 Nominal / outsid ...

ROBOT 6 axis FANUC Model : M-710iC/45M Reach : 2606 mm Installation : Floor, upside-down, wall and angle mount Repeatability : 0.1 mm Payload : 45 KG Weight : 570 kg Application: Assembly, Spot Welding, Load Transfer, Dispensing, Arc Welding, Pick/Pack/Palletizing, Material Removal

Machine name: Decanter centrifuge Manufacturer: Flottweg Type: Z4E-4/454 Year of Make: 2009 Drive motor: 30 kW Worm drive (backdrive): approx. 7.5 kW Permissible Sediment density: 1.6 g/dm³ Max. drum speed: 4,200 rpm Inner diameter drum: 420 / 240 mm Drive speed: Flottweg SIMP-DRIVE drive system (frequency converter-controlled) Material: Stainless steel 1.4463 Max. operating temperature: 0 - 100 °C Dimensions: (L x W x H): approx. 3,500 x 1,000 x 1,200 mm Curb weight: approx. 3,000 kg Tech. Documentation: Yes Remark: Screw Wear Protection: Tungsten Carbide / Chilled Iron Accessories: Control cabinet Condition: Used good Price: On request

Grooving machine Foellmer 45ME Year of construction 1998 Art.Nr. L1008

General SKU246T365 MakeFlottweg LocationBarneveld TypeZ 4D-4/454 Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter420/267 mm InletDN80 Liquid outletDN200 Solids outlet572x242 mm Motor30 kW 400 Volt With hydraulic unitcheck Motor4 kW 380-420 Volt Max. rotor speed3500 rpm MaterialStainless steel 1.4462 (Duplex2205) General No.006.047.00 Year of construction1995 Floorspace3,5x1 m Total height1 m Weight2200 kgStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalDecantersAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteFlottwegIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & fi ...

A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

General SKU279U510 LocationBarneveld MakeEscher Wyss TypeFTK 135/450 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) General No.2710214 Year of construction1980 Mounted on mild steel framecheck Floorspace3,8x1,03 m Total height2,7 m Weight2000kgStarchGreen FridayBiotechnologyAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicFluid bed dryers continuousTea, herbs & coffeePowdered foodsEscher WyssIndustries > Food & Feed > ...

General SKU366X870 MakeFlottweg TypeC 4E-4/454 No.017.078.17 Year of construction2012 LocationBarneveld Main Features MaterialStainless steel Capacity40000 Ltr./Hr. Motor37 KW Specified Features - Decanter Decantercheck Screw diameter470 mm Screw length2100 mm InletDia. 65 mm Liquid outletDia. 150 mm Solids outlet600x300 mm Motor37 kW 400 V 3000 rpm: 7,5 kW 400V 1500 rpm Max. rotor speed3400 MaterialStainless steel 1.4408, Stainless steel 1.4463, Stainless steel 1.4571 (316Ti) General Mounted on foundation platecheck Floorspace3,50 x 1,20 m Total height1,10 m Weight2700 kg CEcheck Extra SpecificationsRotor Max. rotational speed: 3400 rpm Max. sediment density: 1.3 g/cm³ Drum inner diameter: 470 mm Discharge diameter: 240 mm Min./max. product temperature: 0 / 60°C Product-contacting materials Drum: 1.4463 – TI-QUA-0002 Other parts: 1.4408 / 1.4571 Seals: NB ...

General SKU251W326 LocationBarneveld CEcheck MakeFlottweg TypeZ53-4/454 Main Features MaterialStainless steel Capacity70000 Ltr./Hr. Motor55 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameterDia. 330 mm Screw lengthCa. 1900 mm Inletdia. 65 mm Liquid outletcheck Solids outletcheck Motor55+5,5 kW, 400 volt Max. rotor speed3100 rpm MaterialStainless steel 1.4463 General No.007.214.05 Year of construction2001 Mounted on framecheck Mounted on foundation platecheck With switchgear(as is) Floorspace1,70x3,90 m Total height1,10 m Weight6800 kg Extra SpecificationsDrum dia. Inside 529 mm&:nbsp:max work temperature 100°Cmax drum speed 3100 rpmmax sediment: 1,5 g/cm3capacity: 35-70m3/hDrum inside Dia. 529 mm, drum length 1750 mm, max work temperature 100°C Technical specs Extra informationDrum inside Dia. 529 mm, drum length 1750 m ...

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 450 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 675 mm -Total length extended: 1125 mm -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 52/H675 mm -Weight: 4.8 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Frieseke & Hoepfner, hydraulic unit MKP R 14 / 9-1.6 -Motor: AEG 1.5 kW / 1400 rpm -Pressure: up to 450 bar -Delivery rate: 1.6 l / min -Individual components: see photos -Hydraulic tank: with level indicator -Dimensions: 1520/630 / H820 mm -Weight: 260 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Sold as is, in its current condition -Motor housing: Repair weld, see photos -Manufacturer: Frieseke & Hoepfner, hydraulic power unit MKPR 6/1.6 -Motor: AEG 1.1 kW / 1400 rpm -Pressure: up to 450 bar -Flow rate: 1.6 l/min at 1450 rpm -Individual components: see photos -Dimensions: 580/290/H485 mm -Weight: 46 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: ROM-Boffalora, double-acting hydraulic cylinder, 150 mm stroke -Type: 65 45M 150 FRA S -Piston rod: Ø 45 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 375/100/H160 mm -Weight: 14.8 kg/pc.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: ARI Foxboro, Pneumatic Control Valve -Control valve: type ARI-Stevi 451 -Spring accumulator: ARI Type 100403429-216 -Positioner: Foxboro, Schneider Type SRI986-BIDS7ZZZNA -Connection: DN50 PN16-25 -Number: 3x control valve available -Price: per piece -Dimensions: 710/300/H270 mm -Weight: 31 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 2 rollers -Type: VICO FLEX-127-274-14-SF -Material: AISI 304 -Width: 457 mm -Length: 10 m / 17.56 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 1200/800/H740 mm -Total weight: 113 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel -Type: VICO FLEX -Width: 455 mm -Length: 9700 mm -Number: 3 rolls available -Price/Distribution: per roll -Transport dimensions: 600/370/H370 mm -Weight: 62 kg/unit

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 1 roll -Type: VICO FLEX -Width: 457 mm -Length: 18.29 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 800/457/H630 mm -Weight: 75 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 3 rollers -Type: VICO FLEX -Width: 455 mm -Length: 5 m / 8.930 m / 12.860 m -Height: 10 mm -Submission/Price: complete -Transport dimensions: 1200/800/H420 mm -Total weight: 150 kg

General SKU204Y005 MakeFlottweg Serial009.006.01 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor75 KW Specified Features - Decanter Decantercheck Screw diameter600 mm Screw length2500 mm InletDN65 Liquid outlet250x800 mm Solids outlet700x800 mm Motor75 kW, 500 V 1483 rpm With hydraulic unitcheck Motor22 kW, 500 V 1465 rpm Max. rotor speed3000 rpm MaterialStainless steel 1.4463 General TypeZ6E-4/454 No.009.006.01 Year of construction1996 With switchgearControl panel (as is): No Electrical panel included Floorspace4,90x1,80 m Total height1,30 m Weight9750 kg Extra SpecificationsDrum speed 3000 rpm, screw differential speed 1-31 rpm,&:nbsp:Weir diameter 398 mm, drum inner diameter 620/420 mm,&:nbsp:max working temperature 100°C, &:nbsp:max sediment density 1,5 kg/dm3,with spare screw, spare parts, hydraulic pump,&:nbsp:Angle inclination 8 ...

General SKU223T196 MakeFlottweg Dekanter (DE) TypeZ3L No.F 831 Year of construction1981 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter Decantercheck Screw diametermax. 420 / min. 226 mm Screw length900 mm Inletdia. 46 mm Liquid outletcheck Solids outletcheck Motor22 kW (400 V, 2940 rpm) Max. rotor speed4000 rpm MaterialStainless steel 1.4307 (304L) General With switchcheck With switchgear(as is) Floorspace2,3x1,3 m Total height1,9 m Weight2350 kgStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalDecantersAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteFlottwegIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > Cat ...

This 3-axis Stratasys Fortus 450mc was manufactured in 2018. It features a working area with an X-axis width of 406 mm, Y-axis depth of 355 mm, and Z-axis height of 406 mm. The machine supports a variety of materials including ABS-M30, Nylon 12, and ULTEM. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details.

Control Fanuc OM Travel distances X/Y/Z: 450 x 300 x 400 mm Table size 600 x 300 mm Spindle speed 8,000 min-1 Tool magazine for 16 Wkzg. SK 30

Hot foil embosing machine LIDOGRAF HFS-450 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Hot foil embosing machine LIDOGRAF HFS-450 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Hot foil embosing machine LIDOGRAF HFS-450 Price: 11000 EUR Download PDF Hot foil embosing machine LIDOGRAF HFS-450 The device is brand new, not used. Showroom version. Description: Hot foil embosing machine LIDOGRAF HFS-450. Rigid welded steel construction, pneumatic piston with smooth pressure regulation and control automation guarantee high quality and repeatability of the work performed. The machine is equ ...

Number:: 012005057812 control: Siemens Sinumerik 840 Tool changer: 24-fach Axles: 3 Miscellaneous:: mit Späneaustrag The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine name: Flottweg Decanter Centrifuge Manufacturer: Flottweg Type: Z4D-3/454 Year of Make: 1997 Permissible. Sediment density: 1.5 kg/dm3 Max. drum speed: 4,000 rpm Inner diameter drum: 420 / 226 mm Material: Stainless Steel Max. operating temperature: 100 C° Curb weight: approx. 3,000 kg Tech. Documentation: Yes Accessories: A control cabinet, a hydraulic system Condition: Used good Price: On request

Specification Injection Molding Machine Ferromatik (Milacron) Magna T Servo 110-450 General data Clamping force: 110 t Year of Make: 2017 Drive: Servo Clamping unit Lights spar spacing: 435 x 435 mm Tool installation height: min. 150 / max. 480 mm Opening travel: 350 mm Max. plate spacing: 830 mm Injection unit: 450 Screw diameter: 40 mm Location: Aachen, Germany

Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006

Transformer - Voltage Transformer 3P 500V --> 3P 380V Manufacturer presumably Flasshoff & Klosterberg Type 45500 Power 45kVA Primaer 3x500 Secondary 3x380V + neutral Hz 50-60 Insulated IP44 Outer dimensions approx.: Transformer 100cm wide 80cm high 60cm deep Weight approx. 400kg Special price