We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,319 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...
used
FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.
used
FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...
new
volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...
used
FRIGOSCANDIA GC76A-06-18 Brand:FRIGOSCANDIA Type:GC76A-06-18 Stock number:M23-5015 Cooling capacity:1 kW Number in stock:± 240 meter piece(s) Price:Quotation request Description: Frigoscandia belt in very good condition! ± 240 meter (on 11 pallets). Belt width: 760mm, effective belt width: 715mm, link height: 80mm, product clearance: 65mm, mesh: 12mm. Visit also our website: used-refrigeration
used
FRIGOSCANDIA GC76A-06-18 Brand:FRIGOSCANDIA Type:GC76A-06-18 Stock number:M23-5015 Cooling capacity:1 kW Number in stock:± 240 meter piece(s) Price:Quotation request Description: Frigoscandia belt in very good condition! ± 240 meter (on 11 pallets). Belt width: 760mm, effective belt width: 715mm, link height: 80mm, product clearance: 65mm, mesh: 12mm. Visit also our website: used-refrigeration
used
Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.
used
Flexi fill for ice cream model : 4000 Cups : 70mm and 95 mm ICe Cream Filler Capacity : 4000 Twist Fill Stations : Cups dispenser/filler/paper placing / lid / Conveyor
used
4234 – DUST FILTER SEPARATOR VACUUM CLEANER FILTER DEVICE EXPLOSION-PROOF FDI HCH Manafacture: FDI Type: HCH 316/1000 Year of construction: 2004
used
ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL ...
used
Feed reel Manafacture: FAGOR Type: 100G
used
FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0.0, Fibro, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. Technical data - SEW Eurodrive worm gear motor SA57 DR63M4/BR/TF, N=1320/35/min., i=38,23, 0,18KW, 230/400V, incl. brake 400V, - FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0, Fibro, - pitch 12, direction of rotation left u right, - All technical details see photos Attention: We also have the mechanically machined rotary table top made of aluminium D1800mm x 25mm thick, we are happy to offer this to you. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. ...
used
Bending capacity at 45 kg/mm2: 2540 x 2 mm 6 angles pre-adjustable Automatic or manual operation Double foot switch 1 additional edge rail 1 additional bending rail wide
new
NC – controlled precision rotary table surface grinding machine with horizontal grinding spindle and transverse slider - brand new Rotary table diameter 1,000 mm Largest grindable diameter 1,150 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 800 kg Circumferential grinding wheel Ø 450/203 mm x W 80 mm Highest workpiece height with new grinding spindle 700 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 14.7 kW Rotary table drive power 5 kW Torque 30 Nm Weight approx. 15,000 kg
used
Product number: 2704EG Type: PFM-12 Serial number: 171 Capacity: 20 - 65 strokes/min. Forming width: 12", 30.54 cm Hopper: 500 Lbs. / 226 kg Belt width: 380 mm Compressed air: 7 Bar, 140 l/min. Power: 3 x 460V, 60Hz, 17kW Dimensions: 2950 x 1100 x 2050 mm Weight: 1950 kg With Tender-Form and paperfeed interleaver. Including various parts and moulds.
used
M. No.: 409091063 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overl ...
used
Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic power unit)Year of construction 1991 Nominal load capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mm Stroke max. 930 mm Construction height - bottom 100 mm (with installation frame) Construction height - top 1030 mm Hydr. Operating pressure 350 bar = lifting capacity 1000 kg Hydraulic engine power 1.5 kW Mains connection 400 volts, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is actuated - without hydraulic power unit - without electrical control Length of mounting frame 2270 mm Width of installation frame 1580 mm Height of installation frame = height below 100 mm Dead weight Lifting table 500 kg good condition; used
used
Film processing machine Fuji FG 400; good condition; cleaned and tested; Working width 400mm; Daylight cassette. Film processor Fuji FG 400; good condition; cleaned and checked; working width 400mm; Daylight Cassette.
used
Hydraulic filter -Type: HY13479 -Number: 10x available -Price: per piece -Weight: 0.5 kg
used
for sale is a used FFS machine for small portions 20 - 30g Product: currently processed cheese but also suitable for butter and other spreads. Capacity: approx. 20 cycles/min. a ́ 12 cups Includes pick & pack packer Year of manufacture not known. the dosing device was made of stainless steel. The machine is still fully installed and immediately available. Dismantling by the buyer
Can filler and seamer KHS / SEN / Ferrum with 32 filling valves and 6head seamer Capacity: approx. 15.000 cph Filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S 7 including Danfoss frequency inverter including beer pressure regulating valve including CIP dummies including CO2 injection before seaming and fixed for can type: 211 / 202 After reconditioning the filler and seamer will be in a condition like new.
used
Total length: 7000 mm Strap width: 2 x 35 mm Distance between strips: 480 mm
used
Face plate, face plate chuck, four-jaw chuck -without: screw-on jaws -Manufacturer: Forkardt -Chuck size: Ø 610 mm -Taper holder short taper: 8 (139 mm) -Weight: 121 kg
used
Fan filter, fan assembly, air cooler -2x fans: per line -Fan papst type: Multifan 4318/2 -Number: 7x fan rows available -Price: per piece -Weight: 0.75 kg
used
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 430 mm -Short taper mount for: bayonet mount, taper size 6 -Hole circle: Ø 133.4 mm -Weight: 72 kg
used
Year of manufacture : 2001 Voltage : 3x400V-50Hz Power: 5.5 kW Capacity : Unknown
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 42700 € : 3100 mm : 2.5 mm : 135 ° : 2.2 kW : 4300 mm : 1770 mm : 1890 mm : 4000 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 45.300,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.300,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 37700 € : 2035 mm : 3.5 mm : 135 ° : 3.7 kW : 3000 mm : 1100 mm : 1750 mm : 2450 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 39.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 45900 € : 3100 mm : 3.5 mm : 135 ° : 3,7 kW : 4300 mm : 1770 mm : 1890 mm : 4520 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.500,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.300,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 51800 € : 4010 mm : 2 mm : 135 ° : 2,2 kW : 5600 mm : 1750 mm : 2050 mm : 4600 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 53.800,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 16.100,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 41200 € : 2540 mm : 3.5 mm : 135 ° : 3.7 kW : 3850 mm : 1700 mm : 1860 mm : 3900 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 42.900,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 55200 € : 3100 mm : 3.5 mm : 135 ° : 3,7 kW : 4300 mm : 1770 mm : 1890 mm : 4220 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control Schneider) OPTION: 2 axes NC control Schneider touchscreen incl. motorized back gauge 800 mm € 15.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 34900 € : 2035 mm : 2.5 mm : 135 ° : 2.2 kW : 3000 mm : 1100 mm : 1750 mm : 2100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 36.700,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 € : 2540 mm : 6.5 mm : 135 ° : 7,4 kW : 3900 mm : 1750 mm : 2050 mm : 6200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 38400 € : 2540 mm : 2.5 mm : 135 ° : 2.2 kW : 3850 mm : 1700 mm : 1800 mm : 3400 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° €40.600,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 40900 € : 2035 mm : 6.5 mm : 135 ° : 7.4 kW : 3300 mm : 1550 mm : 1900 mm : 3710 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 43.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 47500 € : 3100 mm : 4.5 mm : 135 ° : 5,5 kW : 4500 mm : 1750 mm : 1950 mm : 5500 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 50.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.300,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 55100 € : 4010 mm : 3.5 mm : 135 ° : 3,7 kW : 5600 mm : 1800 mm : 2050 mm : 6100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° €57.800,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 16.100,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 50300 € : 2540 mm : 3.5 mm : 135 ° : 3,7 kW : 3850 mm : 1700 mm : 1860 mm : 3700 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control Schneider) OPTION: 2 axes NC control Schneider touchscreen incl. motorized back gauge 800 mm € 15.800,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 38100 € : 2035 mm : 4.5 mm : 135 ° : 5.5 kW : 3300 mm : 1550 mm : 1900 mm : 3200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 40.300,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 42400 € : 2540 mm : 4.5 mm : 135 ° : 5.5 kW : 3900 mm : 1700 mm : 1900 mm : 5100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 45.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 50800 € : 3100 mm : 6.5 mm : 135 ° : 7,4 kW : 4500 mm : 1750 mm : 2050 mm : 6800 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 52.700,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.100,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
vertical boring machine brand froriep model bft160 Used machine visible in Italy, sold as it is
used
Branch module, 2 pieces FESTO FRM-D-MIDI 170685 0 - 16 bar Connections: G1/2, G1/4 ( inch ) New ! Dimensions ( one module ): 55 x 55 x 62 mm
used
Thermo Fisher Scientific Ultra low temperature freezer Thermo Fisher Scientific Ultra low temperature freezers - 2 pcs Working temp.-150C, 193L capacity, made 2019 in good working condition.
used
Vibration feeder Manufacturer : Fimotec-Fischer Type: VZ-40-SZ Technical specifications : composed of: Vibration feeder with sheet steel cylinder oscillating shells Bunker feeding system Control mounted on a work table very good condition
used
We offer two chamber furnaces of type 1 G1101 from Glasbeek Finish BV. Burner: 2. Heating medium: natural gas. Heating capacity: 200kW to 450°C. Footprint: 3400x2400.
used
Filter control valve, basic valve FESTO series D LFR-D-MIDI 546425 Operating pressure: 1 - 16 bar Pressure control range: 0.5 - 12 bar New ! Dimensions: 270 x 140 x 100 mm
used
Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Manufacturer: Festo, maintenance unit with filter and control valve orig -Type: LFR-1/2-D-MIDI -Pressure: max. 16/12 bar -Number: 2x filter control valve available -Price per piece -Weight: 1,3 kg/pc.
used
Filter bowl -Type: LR-D-MIDI-A -Pressure: max. 12 bar -Weight: 3 kg