128,753 used machines on RESALE, but how to find them? Machine Search
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 450 mm -Piston diameter: 40 mm -Dimensions: 600/75/H108 mm -Weight: 4.8 kg/piece
Key data: 360 , 450 , 400
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 72 A (02-13) Engine No.: in production Power: 393 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S4L1D-G41 Gene. No.: in production Generator power: 450 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm ...
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 450 x 450 mm -Depth: 250 mm -Edge: 18 mm -Drain: Ø 60 mm -Quantity: 15x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg
Technogel PA20A-45L Ripple pump Ripple pump 2010, Stainless, 15L tank capacity, pump capacity 1L per min, mobile, can be connected to freezer and filling machine
Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg
Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg
Data sheet of retrofit POS. GE 40.40 Gebhardt roller conveyor (without drive), FB = 450 mm, 8.900 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 8.900 mm Conveyor width: FB = 450 mm Overall width B = FB + 60: B = 510 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 8900 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SP-450 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4535 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...
Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4520 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...
Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4545 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Dimensions: 455/365/H40 mm mm -Bore: Ø mm -Dovetail groove: 17 mm -Weight: 45 kg
Clamping angle, clamping tower, clamping device, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 450/245/H365 mm -Wall thickness: 26 mm -Surface: milled -Holes for workpiece clamping: 18/22/25 mm -Quantity: 1x angle available -Weight: 56 kg
Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²
Stable milling machine - Made in Taiwan - New - unused 3 Axis Digital Display - Heidenhain Scales Electronic handwheel for driving machine ashes by hand Tool spindle vertical and horizontal Tool holder steep taper 50 Max. spindle speed 1,600 rpm Travel X 1100 mm Travel Y 720 mm Travel Z 780 mm Table clamping surface 1500 x 450 mm Max. workpiece weight 1000 KG Rapid traverse of the machine axes 6000 mm/min Infinitely variable axle feed can be adjusted via potentiometer Coolant system Chip protection on the router table
All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw
Pester Pewo Pack 450 with shrink tunnel further information on request
Three-phase motor, electric motor -Power: 3 kW -Speed: 940 rpm -Shaft: Ø 35 mm -Design: B3 -Protection rating: - -Dimensions: 440/350/H300 mm -Weight: 60 kg
32 Sulzer TW11 130” narrow single colour and MW Serial 45000 to 69000 18 machine MW 14 machine single colour Accessories Per Loom 6 Harness shafts 6 Frames 6 Cam Heald wire, and dropper as one machine 1 Beam 1 Cloth role 1 IRO Looms are running and in very good condition
Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. Output max. 22 packs/min., depending on the format Straight infeed Sealing width max. 440 mm 2 infeeds: For cartons and bottles Cartons, insertion length 60-360 mm, insertion width 60-200 mm, insertion height 30-165 mm Bottles, insertion width/Ø max. 41 mm, insertion height max. 180 mm Packing material PE/PP Film width max. 345 mm Format change approx. 15 min. Stacking device Shrink tunnel Skinettatherm with 2 blowers, 20-600°C Outfeed conveyor after shrink tunnel 1,200 x 380 mm PLC Siemens S7-300, touch screen Siemens Simatic TP27 Drive 400V/50Hz
WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS
V-belt pulley, belt pulley -Diameter: 450 mm -Total width: 130 mm -Straps: 6 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock
Herma Labeler 452 MS with Graseby Allen Pressure Unit Perfect for e-cigarettes / lipstick etc
PLC control, digital output -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 451-7LA11 -Number: 5 modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg
Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg
Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg
SCH 4532M Machine Incl packaging film New from 2021 Machine refurbished by the manufacturer
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm -Drawer heights: 260 mm -Weight: 216 kg
Siemens Vacuum Contactor 450 Kw Coil 230 Volt Used
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 450 mm -Conical mount: Ø 110 mm -Groove: 16 mm -Weight: 66 kg
2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm -Weight: 94 kg
Format: Untrimmed: Min. 85x128mm, Max. 320x480mm, Format: Trimmed: Min. 80x120mm, Max. 315x475mm, Product Thickness: Max. 12mm, Capacity: 14000 Cycles/hour, Colour Monitor Touch Screen Control For All Functions, Automatic Format Pre-Setting, Feeders: 1 Hand Feeder, Horizontal Signature Feeders: 6x DHU 450, Vertical Signature Feeders: 2x DVU 450, Cover Feeder CHU 450, Stiching Unit ST 450 with 2 Stiching Heads 45-N14, Thickness Control, Delivery To The Left, Reject Gate For Incomplete Products, Three Knife Trimmer TR 450, With Heidelberg CHA Automatic Compensation Stacker, Delivery To The Left, Machine Condition: Excellent, Machine Was Complete Overhauldt In 2019, After That Was Very Rare Used
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
Key data: 250 mm, 5 kW, 4700 m³/h
Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed
Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc
PLC control, digital output, digital output, Relay Output -Manufacturer: Siemens, Simatic S5 digital output -Type: 6ES5 452-8MR11 -Number: 4x module available -Price per piece -Dimensions: 140/110/H50 mm -Weight: 0.3 kg/pc
PLC control, digital output, relay output -Manufacturer: Siemens, Simatic S5 Digital Output -Type: 6ES5 452-8MR11 -Number: 4 modules available -Price: per piece -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc
Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg
Stainless steel pipe bends, welding bends -Stainless steel pipe bend: welding bend 1.4541 W 90° -Size: 168.3 x 2.6 -Quantity: 5 sheets available -Price: per piece -Dimensions: 440/215/H167 mm -Weight: 3.6 kg/piece
Stainless steel elbow, welding elbow -Manufacturer: Outokumpu, stainless steel elbow welding elbow 1.4571 90° -Size: 114.3x2.6 -Number: 14x sheets available -Price: per piece -Dimension: 225/130/H115 mm -Weight: 1.1 kg/pc.
Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.
Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176
RECON Part Number: 1.60.6-26.60.01-06 Kolbenschmidt 1. Ring groove: 0.75mm ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition
Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)
maximum number of results exceeded
please refine your search
