f 45 used for sale

Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake

Technical data for the pallet rack traverse: Shelving system: Stow Type: Pal Rack OP Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 100 x 50 mm Version: Head traverse 1,450 mm clear width load per pair of trusses 1,800 kg, with the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting

; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842

; Gross weight [kg]: 3754; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : Caterpillar PL444 cellular radio system; Water Tank Volume [l]: 721

; Gross weight [kg]: 13000; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500

; Gross weight [kg]: 35

Mechanized table. Sizes: 4500x1220x360mm. Screws for levelling. T slots of 60x35mm. Posibility of sell with a sliding radial drill.

Key data: 450 mm, 290 mm

Kiptisch

High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg

Dimensions (L/W/H): 3940x850x1350 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dear's Sale, used 1 engine MAK 452 COVER Brgds Hakan KUSCU +905323642509

We offer Doka Eurex 30 top 450 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 450, used - 64,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

Boring power: 35 mm turning speeds: max. 810 U/min core drilling diameter max.: 35 mm tool taper: Weldon 19,05 mm bore stroke: 210 mm weight: 11 kg connected load frequency: 230 V engine output: 1,6 kW Dimensions (LxWxH): 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

; Power [PS]: 489; Gross weight [kg]: 4000; Engine: Volvo TAD1344GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - ...

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

Brotschneidemaschine verwendet. Sehr guter Zustand.

Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) Machine data Parameter Value Unit / Notes Max. press force 4500 kN Stroke rate (continuous) min. 15 strokes/min Max. stroke rate (tool designed for) 75 strokes/min Ram stroke 3 – 200 mm Ram adjustment 120 mm Installation height (min.) 600 mm Max. installation height 670 mm Dimensions of press table Press table length 2000 mm Press table width 1250 mm T-slots (press table) DIN 650 – 28 H12 Number of T-slots (table) 11 pcs Distance between T-slots 150 mm Dimensions of press ram Slide length 2000 mm Slide width 1200 mm T-slots (slide) DIN 650 – 22 H12 Number of T-slots (slide) 13 pcs Distance between T-slots 150 mm Press frame opening Side opening 900 mm Front opening 2200 mm Tool clamping Tool clamping height (upper tool) 80 mm Tool clamping h ...

Laminator Peak PP-450 HR; good condition; cleaned and tested; Working width 450mm; .max. Strength 350mic.; temperature range 100-160 C'; Speed 650mm/min.; Table unit. Laminating machine Peak PP-450 HR; good condition; cleaned and checked; working width 450mm; max.thikness 350mic.; temperature 100-160C'; Speed 650mm/min.; table top machine.

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 495 mm -Width: 398 mm -Height: 85 mm -Plate thickness: 20 mm -with support ribs -Weight: 37 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 785 mm -Width: 15 mm/height: 42 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 2.2 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Orsta, hydraulic cylinder type 4514-3328/0 Pn12 -Stroke: 404 mm -Piston rod: Ø 35 mm -Cylinder: Outer Ø 106 mm -Mounting: Bolt circle Ø 180 mm -Dimensions: 910/220/H220 mm -Weight: 30 kg

Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Dorit VV3-450 vacuum tumbler Serial: 941000323 Stainless, 450l vacuum tumbler, variable speed drum, with manual, with vacuum pump, 3Ph

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 940 mm -Width: 13 mm -Height: 54 mm -Price: per pair (left right) -Number: 4x pairs available -Weight: 1.95 kg

Förderbaänder 16 A 380 V Slow runners Length 90 cm Width 15 cm Height 15 cm

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 450 mm -Piston rod: M20 x 1.5 -Air inlet and outlet: adjustable -Dimensions: 680/115/H115 mm -Weight: 8.1 kg

Tank barrel Jödden 450 litres Complete unit with 12 V electric motor, battery terminals, nozzle Length 1.20 m Width 0.80 m Height 0.96 m Weight 270 kg Forklift tabs

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

Machine vice, stable vice, milling machine vice, modular vice -Manufacturer: Gerardi, Modular Vice -Jaw width: 195 mm -Back height: 60 mm -Clamping range: 450 mm -Dimensions: 695/195/H130 mm -Weight: 70 kg

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 455 mm -Flange: Ø 513 mm / bolt circle Ø 486 mm -Hose length: 145 mm -Weight: 3 kg

Machine Details Stock-No. 1105-03893 Type of machine Surface Grinding Machine - Horizontal Make CANTALUPPI Type 2100 x 450 Year of manufacture 1975 Type of control conventional Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details grinding length 2100 mm grinding width 450 mm workpiece height 650 mm table surface area 2200 x 750 mm distance table - spindle center max. 600 mm table speeds 1 - 25 m/min Cross Feed Autom. 1 - 60 mm/stroke grinding wheel size 400 x 100 x 76 mm grinding wheel speeds 1450 rpm total power requirement 15 kW Additional information Accessories: Magnetplate, 2100 x 400 mm, grinding wheel with flange, draw-off Device.

Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 45x30 BGE45CI -Voltage: 24V -Speed: 3360 rpm -Gearbox: PLG 52 i = 64:1 -Shaft: Ø 12 x 20 mm -Dimensions: 230/61/H61 mm -Weight: 1.8 kg