f 45 used for sale

2 - K machine

1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.

BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS

We supply service and spare parts for seam and machining centers of the manufacturers Elumatec, Rapid, URBAN, Josting, MAW Nottmeyer and Actual. In particular, electronic components of the following machine types are constantly available. Machining centers / saegen: SLK 118, SBZ 122, SBZ 130, SBZ 131, SBZ 140, SBZ 150, DG 142, DG 204, DG 244, DGL 200, DGL 220, DGL 250, DGL 260, DGL 300 Welding machines URBAN, ACTUAL: AKS 6100, AKS 6105, AKS 6110, AKS 6600, AKS 6605, AKS 6610, AKS 6900, AKS 6910, AKS 6250 Plastering machines URBAN: SV 410, SV 410-B, SV 420, SV 430, SV 430-C, SV 530, SV 530-B, SV 530-C, SV 800, SV 815, SV 820, SV 840 Fluegel fitting machines FBA 2500, FBA 2502, FBA 2504 A machine-specific parameterization of the respective components is possible (software, firmware). We keep the following components constantly available: ferrocontrol IPC E500, E550, ...

1 GENKINGER dobby changing trolley type FDCT, year 2002 carrying capacity 400 Kg

Torque: 12 Nm volt: 144 V ampere: 11 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Treif Felix CE dicer, performance 0,6t/h, 2 grid sets, cutting off knife. You are very welcome to test the machine in Koblenz, Germany.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 23 Nm volt: 146 V ampere: 20 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt system consisting of: 1 PCs. Bunker task band Above ground A A = 3500 mm Conveyor width = 1100mm Power 1, 5kW 1 PCs. Trail band A A = 4700 mm Conveyor width = 1100mm Discharge height 2800 mm incl. driver 40mm high Power 1 .1kw primed and painted More info and price on request

Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used, in very good maintenance condition: complete frick/York freeze pump system for industrial use, consisting of the following main components: Frick/York XJS 120S, lifting volume 415 m3/h, screw compressor unit, designed with oil separator, thermosiphon oil cooler, electric motor Leroy Somer 90 kW.The specified cooling capacity of 74 kW is achieved with refrigerant R717 at -40 C/+35 C. 4 identical units available

ampere: 20 A volt: 146 V Torque: 23 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 4200 mm Working width: 2500 mm Working height: 850 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fessmann Turbomat 1800 RT, single trolley smoke house, electric powered, microprocessor control, smoke generator integrated in door You are very welcome to test the smoke house in our facility in Koblenz, Germany.

Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

RECON Part number: 0210 5215 Counter clockwise ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850