f 45 used for sale

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: up to 300 meters Total width incl. motor: approx. 540 mm Conveyor width: approx. 450 mm Roll diameter: approx. 50 mm Roller spacing/ axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 300 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your c ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 57 metres Total width incl. motor: approx. 790 mm Conveyor width: approx. 710 mm Roll diameter: approx. 65 mm Axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 57 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partn ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 57 metres Total width incl. motor: approx. 790 mm Conveyor width: approx. 710 mm Roll diameter: approx. 65 mm Axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 57 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partn ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 90 metres Total width incl. motor: approx. 690 mm Conveyor width: approx. 610 mm Roll diameter: approx. 50 mm Roller spacing: approx. 65 mm Axle spacing: approx. 125 mm Colour: Light grey Frame height: approx. 120 mm Frame width: approx. 35 mm Drive Type: SEW Motor Flat Belt Stock: approx. 90 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics W ...

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

Rotation cutter Built in 2006; working condition

Pneumatic 3-jaw gripper, 52.85.1. 630, Fibro, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition The part was purchased from a company's spare parts warehouse, has never been used and is in mint condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website.  ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Belt Conveyor/ Webbing/ Conveyor Belt Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Webbing Condition: Used Total length: approx. 1000 mm Total width incl. model: approx. 950 mm Total width without motor: approx. 790 mm Conveying width/ belt width: approx. 700 mm Frame height: approx. 80 mm SEW motor included Including side guide The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would b ...

Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

Qty 1 x Pomini Model P270 Banbury internal mixer, M/c no. 362, Year: 1996, HDM style rotors (2 wing equivalent), PYH Dust stops, Hydraulic drop door discharge with Linear actuator, Vickers hydraulic power pack, Unidrive gearbox with couplings (11D type, 1000HP rating). Pneumatic hopper. Without motor or controls. Can be supplied with or without gearbox. Quote for new motor and controls on request.

1 x Farrel F370 mixer chamber and hopper M/c no. 081110, Date: November 2009, SSA dust stops, 4 Wing Rotors, Drop door with Linear actuator, Base Plate with Toggle Latch. Pneumatic hopper with extension neck (Floating weight looks to be in good condition). Parts available: Body, baseplate, Toggle Latch, actuator and Pneumatic hopper with extension neck.

Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8   1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

New Tetra Pak ® spare parts, -> We send you our list on request

Farymann 28 P 10, 2 cyl. Diesel engine air cooled, approx. 16 kw / 22 HP / 2,500 1/min., capacity approx. 1,300 cc, engine kpl.mit air filter, alternator, and starter.

duble door

Currently available in stock: approx. 1,650 pcs. Technical data for the shelf carrier: Manufacturer: META Type: META FIX + META CLIP The scope of delivery includes: 12x Shelf carrier, used Design: f. shelves Material colour: complete galvanized Total height: approx. 53 mm Total width: approx. 18 mm Material thickness: approx. 1.2 mm Weight | Pcs. approx. 0.012 Kg Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.

Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input

Foerder band rolls, rollers for foerder tape or roller conveyor Ball bearings for heavy loads. GST roll 133.0mm/20mm pipe length 1.150mm GUP 88.9/20mm/750/756/782/SW14/13 Roller load 750 Clamping 756mm Diameter approx. 89 to 133mm, various lashings, partly coated with rubber. Steel carrying roller / Foerderband rollers / Roller conveyor rollers According to photos; Unused Special price

1 piece of plan knife head 210 mm 12 Cutting 1 piece corner corner fraeser WALTER 200 mm, F2010 12 cutting Further: Diverse crankshaft fraeser GFM

Round table FERGUSON Pt182RH15752 - see pictures

Worm gearbox with motor - FLENDER CEUA320 - see pictures

Hydraulic round table, for adaptations, etc.

Hydraulic round table with 4 stations, 800 mm

Hydraulic round table FIBRO P10400UN with 3 jaw holder, for adaptations etc. division: 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 96

Electric welding equipment FRONIUS WTU 205, 2 stub

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...

Thyristor-controlled, pneumatic point welding pliers with timer and compensation device 6kVA water-cooled

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

1 x Fanuc Back Plane 3 Slot A05B-2316-C105 1 x Fanuc A16B-3200-0042/05B900514 Board 1 x Fanuc A16B-1 212-0871/17C906140 Power Supply Board Alternative search terms A05B2316C105 A16B3200004205B900514 A16B1212087117C906140 A16B-3200-0042 A16B-1212-0871 A16B12120871.br/> .br>.br/>>A16B32000042.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>

1 x Refurbished Pomini Farrel model P160 Banbury internal mixer, Original year of manufacture 1984, Rebuilt in 2017 (not used since), Mixing chamber volume 160L Net, Batch size at 75%FF and SG 1.0 - 120kg, 2 wing rotors, PYH hydraulic dust stops (new), hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, Unidrive gearbox type NF160, rating 640HP, Input speed 1500 rpm, output 39.6rpm. with 470kW, 500V DC variable speed motor. Mechanically complete but currently without electrical controls.

Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good

Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good

Technical Description:Base Jaws

FZ15KS HIGH SPEED 4 axis vertical machining center X: 550mm Y: 400mm Z: 360mm 4th axis original Peiseler CNC Siemens 840D Table surface 1050 x 450mm Toolchanger 48 posts ISO 40 Spindle speeds up to 12000 1/min with 4th axis Renishaw broken tool detector Coolant through spindle swarf conveyor Can be inspected under power in our warehouse. Mimu machine tools (Italy)

MPS EF 410-8 UV Flexo printing machine Age: 2007 Max. web width: 416 mm Max. printing width: 410 mm Performance: 200 m/min Material Thickness: 20-350 micron Equipment: First Hand Single Unwind Unit S-1000 Infeed Unit Corona Treatment Teknek Web Cleaning Pre-Register Longitudinal registers 8x Flexo printing unit 8x Cooling Roller 8x GEW UV-dryer 1x Double Die Cutting Unit 1x BST Video inspection 1x Matrix Rewinder Unit Longitudinal Cut for Edge trim 1x Rewind Unit S-1000 1x Control Panel Accessories: 11x Magnet cylinder (Z98,104,108,114,120,126,130,138,145,169,180) Printing cylinder (Z98 – Z189/8 pieces from each one) 26x Anilox roller

Modular Touch Screen Scale PC Scale METTLER TOLEDO Model: FW-T 6D B Proven quality from Mettler-Toledo! Year of Make: 2021 Calibrated until 31.12.2025 Colour: black 12.1-inch (30.7 cm) touchscreen 15.6" (39.6 cm) display 2-inch receipt printer (54 mm) Printer: Linerless Printer Interfaces: Gigabit Ethernet 10/100/1000; 1 x RJ11; 2 x USB; 2 x USB 3.0 Intel® Dual Core Up to 8 GB RAM; Up to 128 GB Flash DDR3 RAM; Solid State Disk (SSD) Microsoft Windows® 10 IoT 64-bit Shock-resistant die-cast aluminum housing with non-stick coating incl. 12" customer display incl. TK POS POS POS software Multigrade weigher: 3/6kg Graduation(s): 1/2g Minimum load (min): 10/20g The current model from Mettler Toledo prepared for TSE. incl. Windows and cash register option, which you need for TSE Fast Linerless / Receipt Printer up to 30  ...

Te Koop: Endress & Hauser flowmeter DN 25 Pro level 63F

Te Koop: 3 stuks Endress & Hauser flowmeter DN 25 Pro size 40E

Te Koop: Danfoss 3480-3490 Freqentieregelaar VLT. Type: 3003 175H1011. 380-415 v.

Machine Type: Water Circulation Cooling Unit Make Jäckle Type FKG 3 Connection for the welding machine 230 V Schuko coupling Connection voltage 1 x 230 Volt Power connection 230 V Schuko plug Water pressure 3 bar at 2.3 ltr./min. Cooling capacity 1,000 W Burner connection 2 quick-release couplings Water tank 5.4 ltr. Content Dimensions L x W x H 1,080 x 520 x 830 mm Weight 44 kg Age approx. 10 years Condition workshop tested incl. UVV protocol Warranty: 6 months from the date of delivery Original price €1,350.00 + VAT Your price €590.00 + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Straße 31 81249 Munich The contact person is Mr. Manuel Maier. Of course, we will ship the machine to you for 60,- € by freight forwarder thro ...