f 45 used for sale

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

The most cost effective solution for extruders up to 2.000 kg/h (over 2.000 kg/h, see our item [SBG800](.germanplast.eu/listings/5070212-italian-fully-automatic-scre enchanger-doctor-blade-system)), You can afford one now to improve your material quality and (your workers job), Available in Ø 400-500-600-700 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Laser and punched screens withstand wear and high temperatures.They can be cleaned in a pyrolytic oven to be re-used several times., Counter-flow cleaning system, suitable for light contamination, is used with economical metal mesh., Compact, very easy maintenance., Low material waste., Contact us with your projects details:, - Kind of material, - MFI, - Throughput rate in kg/h, - % and kind  ...

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

Antike Falzniederdruckpresse - Antique Joint nipping machine Krause FNP Baujahr / Year ca. 1950 - Serial-No. 71635 Pressfläche / Press Sie max. 250 x 500mm

Antike Falzmaschine - Antique Folding Machine Guk

Loeffler Filter Technik filter set consisting of 4 filters, type: (4x) SBF-112-S-10-DN80-M, year of construction: 1997, volume: 32 litres, maximum working temperature: 160°C, maximum working pressure: 10 bar, dimensions: 2100 mm x 900 mm x 1900 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3068, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3067, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3063, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3066, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3064, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

Foss Analytical AB meat analyser, model: FoodScan, serial number: 91725054, year or construction: 2012, 100/240 V, 50/60 Hz, 2 A, dimensions: 430 mm x 500 mm x 500 mm. Including Lenovo laptop.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5862, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5864, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5863, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 5865, year of construction: 12/2021, Grp: 2, fluid: Co2, volume: 96 L, TS: -60°C to + 48°C, PT: 80 bar, PS:-5/55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

Size: 440 x 310 mm Equipments: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

DSI Freezing Solutions A/S plate freezer, type: V3 Co2 20/100, number: 3065, year of construction: 03/2012, Grp: 1, fluid: Co2, volume: 96 L, TS: -60°C to + 40°C, PT: 80 bar, PS: 55 bar, clearance: (60x) 350 mm x 100 mm x 470 mm, total dimensions: 3100 mm x 1650 mm x 1300 mm.

Envelope feeder suitable for C4 and B4 envelopes

Make PGF Model Maxi Feeder Year 2005 Min Size 100 x 110 mm Max Size 450 x 450 mm Table height motorized adjuatable from 40 - 75 mm Rietschle vacuum-blower pump, PGF delivery belt A

Metrohm 688 Karl Fischer Drying Oven with Drying Unit

Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used

Welding Fume Extraction, Soldering Suction, Laboratory SuctionHigh Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 DSerien. No. 2902619 year of construction 2004Device air volume flow max. 250 m3/hMinimum air volume flow min. 100 m3/hSeparation efficiency 99.97 %Welding fumes class W3Motor power approx. 0.75 kWNet connection 230 volts, 50 Hz- extraction power infinitely adjustable- 2 pieces extraction connections 45 mm- mechanical air filter (used)- mobile base with 4 fixed castors,

4 pieces damping elements BILZMachine feet, oscillating elementsType Faebi 430 HDBeload 27500-65000 NBload 2750-6500 kgWorking height: 95 mmBase plate: 500 x 500 mm x 10 mmSupport diameter: 315 mmNominal diameter 480 mmAir pressure: max. 6 bar- Fastening thread M20 in the center of the damper- Damper with two-chamber systemvery good conditionIdeal for press, punching machine or punching nibbling machines.Weight per piece: 53 kggood condition; used

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -

Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used

New electric scrubber drier, floor cleaning machine KREMER type KR-FL50AByear of construction 2024Theoretical area output 2000 mª/ hWorking width 510 mmCleaning brush 510 mmBrush speed 175 rpm. Suction lip width 850 mmTank volume pure water: 50 litresTank volume dirty water: 50 litresNoise pollution 66 dBaClimbing capacity 2%Battery voltage 24 volts, 100 AH- battery charger 24 volts- battery 24 volts, 100 AH- one cleaning brush- two separate tanks- without drive drive, the device

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW

Fully automatic system for filling, sealing and sealing crucibles

Office chairs on 5 castors mi GS Condition New Purchase value 680,- +19 % VAT Immediately available in Blue - Black - Beige -Violet

FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap) Frame width (NB): 800 mm Belt width (GuB): 600 mm Construction height (BH): 435 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor belt Side guide distance: 655 mm Maximum recommended package size: 600 x 450 mm Optionally available: Supports to increase the delivery height Frequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1380 Nominal / outside width in mm: 800 Belt width in mm: 600 Driven: YES Engine type: SEW Getriebemotor KW: 0,25/S1, 0,37/S1 scope of delivery: including side g ...

-

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

Belt filter press The machine consists of a completely closed, strong sheet steel housing with synthetic resin coating, the lower part of which is designed as a filtrate collection basin.

Grinding area: 600 x 400 mm Magnetic table Coolant tank various grinding wheels

Cito Pac suppository filling line Filling, cooling, and sealing machine for suppositories in preformed plastic packages. Revision made in 2023 • two filling points • filling machine SFD10CP • dosage per filling point: from 0.5 to 3.5ml • cooling tunnel: KTE-10 CP • cooling path: 25 m (approx) • sealing machine: BST-10 CP • production capacity: up to 10,500 suppositories/hour (approx)

Functional, used chamber filter press with motorized hydraulics and closed filtrate outlet.

TOFFLON VIALS FILLING LINE The line can be adapted to different production modes and can be flexibly connected to lyophilization systems. --- 1) Tofflon Washing Machine FW03024 Year of manufacturing: 2019 Washing machine for vials. PRODUCTION: Filling range: 2-100 ml (ca) • Cleaning speed: 7ml-100VPM • Operation mode: servo drive OTHER CHARACTERISTICS • Size: 2,335 mm × 2,405 mm x 1,450 mm (ca) • Power (kW): 13-15 (ca) --- 2) Tofflon Tunnel, model FT0110 Year of manufacturing: 2019 For cleaning and filling vials. --- 3) Tofflon Filling and Stoppering Machine, model FF0204 Machine for filling and closing vials. --- 4) Tofflon Capping Machine, model FC0210 Year of manufacturing: 2019 For capping closed vials. PRODUCTION • Production range: 2-100ml • Production speed: 10ml-100VPM • Number of capping heads: 6 OTHER CHARACTE ...