We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,964 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Profile Width (Max): 235 mm // Output Capacity: 100 kg/h
Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep
used
Haul-off-saw combination, used Manufacturer: BLAKE Type: 302-1100-140 Year of construction: 1993 Haul-off force: approx. 10,000 N Pad width: 120 mm Effective contact length: 1100 mm Haul-off speed: approx. 0.5 – 10.0 m/min. Caterpillar clamping: pneumatic Drive motor haul-off: approx. 3.5 kW Drive motor saw: approx. 1.5 kW Profile cross-section: approx. 140 x 60 mm
used
A used extrusion line for the production of rigid PVC profiles, Output approx. 300 - 350 kg/h, consisting of: 1 x twin screw extruder Manufacturer: Battenfeld-Cincinnati Type: ARGOS 93P-28D Year of construction: 2007 Screw diameter: 2 x 93 mm (parallel) Screw length: 28 x D Screw speed: max. 26.0 1/min. Drive power: 50 kW (GS motor) Power: approx. 150 kVA Operation: EXcPRO-XP with 10.4' TFT colour display Accessories: horizontal screw dosing, material hopper Degassing unit with vacuum pump Output: max. 300 - 350 kg/h for rigid PVC, depending on the material and product Note: new gearbox installed in 2014. 1 x Vacuum calibration unit Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Length: 6000 mm Vacuum pumps:3 x BluVac pumps from Speck, Energy-saving vacuum generation through patented speed control Pump power: 3 x 4.3 kW Longitudinal adju ...
used
see pdf attached
new
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change
used
According to description pdf attached complete line for profiles + WPC profiles
used
see pdf attached
used
see pdf
used
see PDF attached
used
Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.
used
Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.
used
1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,
used
Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW
used
Extruder with vacuum pre-press LVP-35, gearbox refurbished in 2011, extrusion helix plated with hard metal bits. Press is equipped with a 60 kW DC drive (can be replaced by a 55 kW AC drive at anextra charge). The machine is test-run and comes with spare parts.
used
Extruder is missing electronics and it is not in running condition. Barrel 30D The barrel was opened for inspection of the liners and shafts, the hydraulics function correctly. Liner 1. Feed, 2.5D good condition Liner 2. Inter, 5.0D good condition Liner 3. Inter, 5.0D good condition Liner 4. Inter, 5.0D good condition Liner 5. Inter 5.0D good condition Liner 6. Inter 2.5D good condition Liner 7. XLT Discharge 5D good condition. Feed and return lines were removed and compressed air fed into circulation blocks. All blocks were found to have good flow. Pipework is in good condition with all solenoids present. All control thermocouples and melt thermocouples are in place but could not be tested due to condition of electrics. All the heaters are in place but could not be tested due to the condition of electrics. The barrel is in very good overall condition. Shafts Al ...
used
Know-how included FOAMED PP Film Line: 540 mm wide, can produce 1200 - 1500 Kg per day (120-140 mic) Extrusion by Dipiemme,Italy (1991) With Piovan Dosaging(1998) Corona by Martignoni(2004) Scan-T Control by Roder Electronics Mechanical parts of the machine constructed by Off. Trevisani S.a.s Ferroli Cooling
Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...
used
Maximum Diameter: 3000 mm // Minimum Diameter: 500 mm
used
Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels
used
Used line for the production of the co-extrusion by PST Forming method. PTI - The twin screw extruder DS 92/28 2x screws with a diameter of 92 mm The length of screws 28 x L / D Snails closed system with internal temperature control, deep nitrided, with degassing on the cylinder, extruder equipped with a vacuum pump with filter, Siemens Servo Motor power: 60 KW Torque: Nm 15700 Screw rotation: 0 - 50 rev. / Min. Zones with ceramic heaters with an intense cooling: 5 x 5 KW Cooling Zones: 4 Performance with hard PVC, depending on the materials and tools: max.600kg / h Length: 4500 mm Width: 1600 mm Height: 2300 mm Extruder equipped with a microprocessor control SIEMENS type Extrusion Pro Pak visualization 2. Co-Extruder PTI - The twin screw extruder DS 68/28 Snails with a diameter of 2 x 68 mm Length of the screws: 28 x L / D Snails cl ...
used
For sale a complete extrusion line in good condition, produced in 2004 by A + G Austria. Extruder KMD110 (Krauss Muffai) 1996 The line is designed for the production of a PVC window sill, 500mm wide, as well as a seamless panel with a width of 250mm. The appropriate extrusion tool is available. Line productivity 350kg / hour. The line allows you to process highly filled mixtures at a low cost. The set includes a screw loader. The cylinder augers after replacement have worked for 6 months
CLEXTRAL STOLZ Petfood extrusion line a complete double screw extrusion line for petfood, capacity between 1 / 2.5 tonnes per hour. Was stopped end year 2022. Still visible in the layout. Main machines : extruder CLEXTRAL BC82in very good working condition, granulator, conditionner WENGER, coater, dryer all the peripheral.. Information and list of machines on request
used
complete extrusion line for 3-layer Rolbatch film. The presented model has the catalog number 120/75 / 75-1800. The line is equipped with three extruders - Ï120 (capacity -350 kg / h) and 2xÏ75 (capacity - 100 kg / h), screen changers, trapezoidal extrusion head, water tank, cooling unit, edge cutting device, winding devices and control system. Bolts, cylinders and long head are made of nitrided tool steel. The machine is operational, but is currently in storage and is not being produced. The most important technical data: Producer: Rolbatch Model: 120/75 / 75-1800 Sheet thickness: 0.3-0.5 mm Width:
used
Complete extrusion line for the production of PP and PS films, produced by Battenfeld-cincinnati GmbH 2012 release, Designed for the production of films of polypropylene and polystyrene. equipped with a loader Moretto Main technical characteristics: Extrusion line: Possible materials for processing PP and PS Max. film width 850 mm Film thickness 300 ÷ 2000 microns Productivity 400kg / hour Gross weight, kg 18 138 kg 2nd position winder: Max. film width 1000 mm Max. diameter of winding is 1400 mm Pneumatic winding shaft diameter for 152 mm (6 ’) sleeves To operate the equipment, a three-phase AC network is required, compressed air with a pressure of 8 Bar, water supply.
Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...
used
Artec line Artec Model 900 extrusion line Model 900 125mm auger
used
Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...
used
Extrusion line consisting of two extruders: - Bandera 60 extruder - year 1960 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - variable V gearbox - Union extruder 60 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - mechanical gearbox - 400 mm coextrusion table - Towing, cutter, oven, Pagani exit tunnel - Tecnofar calender width 450 mm
used
Bandera 60 extrusion line 25 kW, 400 V Year 1961 Diameter 60 L / D ratio 20 Variable V gearbox With electrical panel Gauge holder bench with vacuum pump and variable speed track drive, Pagani brand
used
Extrusion line consisting of: - Bandera 45 extruder - year 1960 - 15 kW, 400 V - diameter 45 - ratio L / D 20 - mechanical gearbox - Gauge holder bench - towing - disc cutting and overturning - Pagani brand
used
Manufacturer: Future Tech Model: Single Screw PS/PP Extrusion Line Year: 2016 Condition: Excellent Availability: Immediately Materials: PS-PP grnulate Material Width Range: 0.18mm â 1,2mm Max Sheet Width: 750mm Output: 450kg/hour Main Extruder: 120mm single screw extruder air cooled 90kW ac motor & inverter Co-Extruder-1: 65mm single screw with 30kW ac motor & inverter Running from 0.18mm to 1.2mm thick PS/PP up to 450kg/hr. Mix of virgin an regranulate Vented 120 mm extruder with liquid ring vacuum pump system. Screen changers with GOODI systems. Feed block with selector plugs. 750mm wide flex lip single manifold sheet die. Max net width of the sheet is 750mm. Manual T- die. Flex bottom lip. Fixed uper lip. 1100mm wide 3 roll polishing stack with horizontal configuration ( 300mm x 450mm x 450mm diameter). Individual inverter speed drives. Max roll weight 200kG. ...
used
Model: Single Screw PS/PP Extrusion Line Year: 2012 Condition: Excellent Availability: Immediately Materials: PS-PP grnulate Material Width Range: 0.18mm â 1,2mm Max Sheet Width: 750mm Output: 350kg/hour Main Extruder: 105mm single screw extruder air cooled 120kW ac motor & inverter Co-Extruder-1: 65mm single screw with 30kW ac motor & inverter Co-Extruder-1: 45mm single screw with 20kW ac motor & inverter Running from 0.18mm to 1.2mm thick PS/PP up to 450kg/hr. Mix of virgin an regranulate Vented 105 mm extruder with liquid ring vacuum pump system. Screen changers with GOODI systems. Feed block with selector plugs. 750mm wide flex lip single manifold sheet die. Max net width of the sheet is 750mm. Manual T- die. Flex bottom lip. Fixed uper lip. 1100mm wide 3 roll polishing stack with horizontal configuration ( 300mm x 450mm x 450mm diameter). Individual inverter ...
used
Description: Extruder Müller ELK 60-28 Manufacturer: Müller Type: ELK 60-28 Year of construction: 1995 Condition: very good Type of offer: second-hand machine Location: D - North Rhine-Westphalia Technical data: Müller extruder machine 40,000 h Runhour type: ELK 60-28, profile extruder control:-year: 1995 injection unit screw diameter mm: 60 other ELK 60-28 d 57 KW
used
pdf attached
used
Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.
used
Line for PVC profiles : 1.Extuder Single Theysohn AS 63mm PVC 2. Calibration table Greiner Genius Cal 2P/3.6 3. Theysohn REA32/1HJ-TECH belt lashing 4. saw Theysohn REA32/1HJ-TECH) price for all Line 25.000 Euro
used
BARMAG EXTRUSION SPINNING MACHINE WITH 12 POSITION / 72 THREADLINES • FOR PET POY MICROFILAMENT • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm
used
TMS 65mm blown film extruder, complete with frame and new screw scale to be assembled, ABB motor overhauled in September, machine stopped in November, video available in operation, pulling and collecting mm.850, production around 120 kg/h.
used
plastic regranulation line from 2016 Screw diameter 150mm L/D 33:1 Main engine 160 kW Capacity 400-500kg
used
materials: LDPE HDPE PP installed power 260kw double degassing changer 200 mm cutting on the head (head for pp and ldpe) vertical centrifuge capacity ldpe 300-350 kg yield pp 320 kg depending on the material spare heaters mill knives etc. Second plasticizing system after complete regeneration
used
Bandera Extruder Tr 60 - Diam 28 Ld Year 1991 Material Pp - Pe 12 Zone Control Panel Cear Mlf 180 K engine DC Drive Motor Vecc130 Hp 40 -- 75 - 2500 Rpm
used
2022 Model Natron Makina production, like new, almost never used, technical information about the product is in the photos section.
used
used
it is only DC-80 full complectation line left. There are some additional machines as well. It is chiller, air compressor, pallet mixer.
used
PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set
used
Regranulating machine fi 120 bimetal -flake pressure - plate self-cleaning changer - thread head - granulator with a widia cutter - degassing main engine 75 kw
used
- Flag - POS Used machine visible in Italy, sold as it is
used
CAPUZZI M20 + M22 + M25 mm corrugator line. OFFER: CAPUZZI CORRUGATOR TEAM composed of: - CAPUZZI CORRUGATOR EQUIPMENT made of water-cooled aluminum -3 sets of MOLDS for corrugated tube measures M20 + M22 + M25 mm. external diameter.
used