used Extruding lines for pipes for sale

Maximum Diameter: 70 mm // Minimum Diameter: 20 mm

Maximum Diameter: 25 mm // Minimum Diameter: 12 mm

Key data: 60

Extrusion line for the manufacture of 100 mm forest protector composed of: - Extruder 1 spindle, brand: Flag, 60 mm 25 L / D, motor: 30 hp. With variable speed drive and electrical panel. With charger on single-phase hopper. - Stainless steel cooling bath: 4 m. With 2 vacuum pumps: 4 Kw (5.5 hp) each. - Drag trolley: 2100x190 mm - Die cutter and shear with hydraulic group: 4 Kw (5.5 hp). Tank: 75 litres.

Key data: 60

Extrusion line for the manufacture of forest protector 90 mm composed of: - Extruder 1 spindle brand: Flag, 60 mm Ø 25 L/D, motor: 37 Kw (50 hp). With variable speed drive, electrical panel and stainless hopper with master dispenser. - Stainless steel cooling tub: 2 m with 2 vacuum pumps: 4 Kw (5.5 hp) each. - Towing trolley: 1300x130 mm, brand: Cincinati Milacron, engine: 5.5 Kw. - Die-cutting machine and shear with hydraulic group: 4 Kw (5.5 hp), tank: 75 liters.

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Tube Diameter (Min): 25 mm // Tube Diameter (Max): 50 mm

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

Maximum Diameter: 3000 mm // Minimum Diameter: 500 mm

Maximum Diameter: 24 mm // Minimum Diameter: 12 mm

Corrugator (without tools) suitable for pipes up to 315 mm Manufacturer: Fränkische Type: FDC 315/36V Year of construction: 2007 (never used in production) Basic technical data: Max. product diameter: 315 mm Number of mould jaws: 36 Electrics: 3 x 400V 50 Hz + N + PE Extrusion height: 1100 mm Serial No.: MV-2034 Operating hours: 450 hours / mechanical only Condition: very good, never used in production, for mechanical demonstration only.

Maximum Diameter: 20 mm

Maximum Tube Diameter: 110 mm // Minimum Diameter: 50 mm

See PDF attached

Vacuum Corrugator suitable for the production of single-wall corrugated pipes from 4.5 – 25 mm AD designed for 90 pairs of moulded jaws Manufacturer: MAINTOOLS Type: Inovo 25/90 BV Year of construction: 2008 Condition: cleaned and functionally tested!

complete used multilayer composite pipe extrusion line (PE-AL-PE) suitable for pipes from 10 - 32 mm Includes tools for diameter 16mm Year of construction: 2010 Condition: very good and ready for use!

Automatic double wheel reel suitable for pipes from 10-32 mm OD Manufacturer: NEXTROM /Maillefer Type: MWB 1300G Year of construction: 1998 Condition: "as it is", ready for operation.

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Key data: 60

Composite Tube Extrusion Line: A- Extruder, brand: Sterling, 1 spindle: 60 mm Ø 25L/D, Motor: 25 hp with variable speed drive and electrical panel. B- Head for small tube: 0.5 mm and more. C- Water-cooled bathtub: 9 meters with pump and tank. D- Tow Cart, Brand: Mild Ltd Boston: 700x150, Motor Output: 1.5kw with variable speed drive. E- Double winder with guide: 600 mm Ø

Line for complete PE pipe, with automatic dropper inserter. Brand: TRIMEC. Year: 1994. Composed of : A.-Extruder TRIMEC TM 75/30D. Engine: 57.5 kw. Hopper loader. B.-Head for tube. C.-Loader system drippers, with accumulator tank and insertion of TRIMEC drippers. D.-Vacuum bathtub and stainless calibration: 5 meters VC/1. E.-Stainless cooling bathtub: 5 meters. VR/1 F.-Stainless cooling bathtub: 5 meters. VR/1 G.-Interline drill with guillotine TRIMEC DRTS PERFORATING DEVICE. Type GF/1. H.-TRIMEC stretch trolley: 2 TR/1 bands. I.-TRIMEC winder, type: ML3/1.

Key data: 60

PE pipe extrusion line - 1-screw extruder: 60 mm Ø, 28 L/D with motor: 37 KW (50hp) with AC speed variator, electrical panel with tube head for 16 and 20 mm. - 3 m vacuum and cooling bathtub with vacuum pump: 5.5 hp. - Cooling bath: 2.5m - Drag trolley (Track): 800 x 100 with variable speed drive. - Minimum inner double coil winder: 330 Ø maximum external 1,200.